• 실내환경 및 냄새 학회지
• /
• 제17권4호
• /
• pp.372-380
• /
• 2018

To abate the problem of odor from restaurants, a hybrid adsorbent consisting of organic and inorganic materials was developed and evaluated using acetaldehyde as a model compound was deveioped and evaluated. Powders of activated carbon, bentonite, and calcium hydroxide were mixed and calcinated to form adsorbent structure. The surface area of the hybrid adsorbent was smaller than that of high-quality activated carbon, but its microscopic image showed that contours and pores were developed on its surface. To determine its adsorption capacity, both batch isotherm and continuous flow column experiments were performed, and these results were compared with those using commercially available activated carbon. The isotherm tests showed that the hybrid adsorbent had a capacity 40 times higher than that of the activated carbon. In addition, the column experiments revealed that breakthrough time of the hybrid adsorbent was 2.5 times longer than that of the activated carbon. These experimental results were fitted to numerical simulations by using a homogeneous surface diffusion model (HSDM); the model estimated that the hybrid adsorbent might be able to remove acetaldehyde at a concentration of 40 ppm for a 5-month period. Since various odor compounds are commonly emitted as a mixture when meat is barbecued, it is necessary to conduct a series of experiments and HSDM simulations under various conditions to obtain design parameters for a full-scale device using the hybrid adsorbent.

• 한국대기환경학회지
• /
• 제25권2호
• /
• pp.122-132
• /
• 2009

Adsorption of toluene by activated carbon fiber (ACF) coated with dielectric heating element and desorption by applying microwave were investigated. In order to prepare adsorbent so that VOC can be desorbed by microwave heating, fine dielectric heating element with nano size was coated on the surface of the ACF using hybrid binder. Eight adsorbents (ACF-DHE, Activated Carbon Fiber coated with Dielectric Heating Element) were prepared with different amount of dielectric heating element, kinds of hybrid binder, and solvent. In order to investigate adsorption characteristics, BET surface area, pore volume, and average pore size were measured for each adsorbent including ACF. Breakthrough experiments with toluene concentration, flow rate, bed length using fixed bed reactor were performed to investigate adsorbality of adsorbent, and results were compared with that of the ACF. Desorption reactor was constructed with modified microwave oven to investigate heating effect on ACF-DHE by applying microwave power. Each adsorbent saturated with toluene were put into desorption reactor. Composition of desorbed gas generated by applying controlled microwave power to reactor was measured. Up to now, hot air desorption method has been used. Experimental results showed that desorption method with new adsorbent prepared by coating dielectric heating element on ACF can be used for industrial application.

• 공업화학
• /
• 제29권5호
• /
• pp.571-580
• /
• 2018

본 연구에서는 수용액에서 Pb(II)를 흡착 제거하기 위하여 커피찌꺼기(spent coffee grounds; SCG)와 점토광물인 견운모(sericite)를 혼합하여 복합흡착제(SS)를 제조하였다. FT-IR 분석결과 SS의 주요 관능기는 O-H, C=O와 C-N 그룹이었다. SS의 비표면적, 기공직경 그리고 양이온 치환 용량은 SCG와 sericite보다 크고, 높았다. SS 흡착제 제조를 위한 최적의 조건은 소성온도 $300^{\circ}C$, SCG : sericite 비율 8 : 2, 입자의 크기는 0.3 mm이었다. SS 흡착제를 이용하여 Pb(II)를 제거하기 위한 실험에서는 Langmuir 흡착식이 Freundlich보다 적합하였으며, Langmuir 등온흡착식에 의한 Pb(II)의 최대 흡착용량은 44.42 mg/g이었다. 또한, 열역학 분석에 의하면 SS 흡착제를 이용한 Pb(II)의 흡착 공정은 물리적인 흡착이었으며, 자연적인 발열반응이었다. SS 흡착제의 흡착-탈착 실험에서는 88-92%를 회수할 수 있었으나, 탈착 횟수가 증가할수록 SS 흡착제의 활성사이트는 감소하였다. 위의 실험결과 SS 흡착제는 전처리 없이 저렴하고, 효율적으로 Pb(II)를 수용액에서 흡착 제거할 수 있다.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.48-52
• /
• 2006

A mixed adsorbent prepared by pyrolysing a mixture of carbon and flyash in 1:1 ratio was tested for its deceleration ability for three different classes of dyes, namely Astrazone Blue FRR(C.I. Basic Blue 69), Teflon Blue ANL(C.I. Acid Slue 125) and Verofix Red(Reactive Red 3GL). Equilibrium investigations were carried out at the optimum conditions obtained in the previous studies. The equilibrium data fitted reasonably well to both the Freundlich and Langmuir adsorption models. However the Langmuir model was more appropriate to describe the adsorption behavior of the dyes to the hybrid absorbent system compared with the Freundlich model. The mixed adsorbent cm be an low-cost alternative to activated carbons.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.275-282
• /
• 2020

Hranfa's marl, a local natural mineral, is selected for the decontamination by adsorption of aqueous effluents in textile industry. Its physicochemical characterization is first performed. It is composed mainly of Calcite, Quartz, Ankerite and Muscovite. Its specific surface area is 40 ㎡ g^-1. Its adsorption performance is then tested in batch conditions using an industrial organic dye, Bemacid Red E-TL, as a model pollutant. The measured adsorption capacity of Hranfa's marl is 16 mg g^-1 which is comparable to that of other types of natural adsorbents. A hybrid process is tested coupling adsorption of the dye on marl in suspension and microfiltration. An adsorption reactor is inserted into the circulation loop of a microfiltration pilot using ceramic membranes. This makes possible a continuous extraction of the treated water provided that a periodic replacement of the saturated adsorbent is done. The breakthrough curve obtained by analyzing the dye concentration in the permeate is close to the ideal one considering that no dye will cross the membrane as long as the adsorbent load is not saturated. These first experimental data provide proof of concept for such a hybrid process.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2006년도 춘계학술발표회 논문집
• /
• pp.116-119
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3311-3316
• /
• 2012

In this paper, a layered-carbon-$Fe_3O_4$ (LC-$Fe_3O_4$) hybrid material was synthesized through a facile one-pot solvothermal method and used as the adsorbent for the preconcentration of some phthalate esters (dimethyl phthalate, diethyl phthalate, diallyl phthalate, diisobutyl phthalate and benzyl butyl phthalate) in water samples. The effects of the adsorbent dosage, extraction time, the solution pH and salinity on the adsorption of the phthalate esters (PAEs) were investigated. The magnetic nanocomposite adsorbent could remove and enrich the PAEs from water samples efficiently. After the adsorption, the analytes were desorbed and then determined by high performance liquid chromatography-ultraviolet detection. Under the optimum conditions, the enrichment factors of the method for the analytes were in the range from 161 to 180. A linear response with peak area as the quantification signal was observed in the concentration range from 0.5 to $100ng\;mL^{-1}$. The limits of detection (S/N = 3) of the method were between 0.08 and $0.1ng\;mL^{-1}$. The method was suitable for the determination of trace phthalate esters in environmental water samples.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.641-648
• /
• 2013

Arsenic (As) contamination in drinking water is severe problem for about 100 million people who live in Bangladesh, Cambodia, Nepal, India, Vietnam, Myanmar, Mongolia, and Ethiopia etc. Chronic doses cause skin cancer, blackfoot disease, and cardiac damage. Even though the biosand filter (BSF) is popular in many developing countries, it could not remove effectively hazardous ions as As. Adsorbent is effective and feasible to reduce As. In this study the improved biosand filter (iBSF) was embedded with adsorbent, was tested to evaluate As removal as well as organic removal. In 20 days removal of turbidity, bacteria, and $UV_{254}$ have shown 60-95 % removal. Arsenic was removed more than 99.9 % in the columns embedded with silica oxides of ferric manganese ($FM{\alpha}$) while 5.8 ~ 38.3 % in columns without $FM{\alpha}$. Isotherm test showed that average amount of the adsorbed arsenic on the oxides was 0.56 mg/G.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2198-2206
• /
• 2018

We addressed the development of a novel, low-cost, and high-efficient material from hybrid materials, known as microcapsules. Microcapsules are a composite adsorbent made of a mixture of tannin, sericite and chitosan. The FT-IR analysis showed that the microcapsules contain hydroxyl, carboxyl, carbonyl, and amino groups, which play an important role in the adsorption of heavy metals. The microcapsules were able to remove 99% of Pb(II) in 30 min, and obtained a removal efficiency of more than (13-50)%, compared with the single adsorbents of tannin, chitosan, and sericite. In adsorption kinetic analysis, pseudo-second-order adsorption was more suitable than pseudo-first-order adsorption, and chemical adsorption did not limit the adsorption rate of Pb(II) ion. In isothermal adsorption, Langmuir adsorption was more suitable than Freundlich adsorption, and the maximum Langmuir adsorption capacity was 167.82 (mg/g). Furthermore, desorption and reusability studies, as well as the applicability of the material for wastewater treatment, demonstrated that microcapsules offer a promising hybrid material for the efficient removal of significant water pollutants, i.e., Pb(II) from aqueous solutions.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.67-68
• /
• 2003

휘발성 유기화합물(Volatile Organic Compounds; VOCs)은 용제를 사용하는 도장공정, 석유화학공정 등 각종 산업공정과 자동차로부터 배출되어 대기중에 광화학 산화물을 형성하거나 그 자체로 발암성 또는 악취성을 나타내는 물질로서 인체에 유해한 영향을 미친다. VOCs 물질의 전자빔 처리공정의 경우 상온에서 운영되어 에너지의 소모량이 적고, 2차오염물 발생이 매우 적으며 다양한 종류의 VOCs에 적용이 가능하므로 기존 방지시설의 보완 및 대체시설로서는 최적인 것으로 평가되고 있다. (중략)