• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.287-292
• /
• 1998

This paper presents some results of performance evaluation test via actual machines of a new hybrid vector control utilizing a new indirect orientation scheme and stable filter embedded direct orientation scheme for induction motors without speed or position sensor. It is shown through the test by 0.3(kW) and 3.7(kW) motors that the proposed sensorless vector control has the following high potentialities: 1) speed range is 0 to 600(rad/s) or more, 2) zero-speed command is accepted and settles the machines at a stable standstill with no vibration 3) it can make machines to track variable command of acceleration and deceleration $\pm$6,000(rad/s2), 4) it can make machines to drive directly load of at least 26 times larger inertia than that of the machine, 5) it can make machines to produce much larger torque than the rating in torque control mode even at standstill. The performance confirmed by the test is far away for previous schemes or sensorless drive apparatuses.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.704-709
• /
• 1998

An automated calibration system of sound level meters was developed and tested. As a standard sound source, the speaker unit(Forstex FE208) cabineted by 440 * 390 * 490 mm$^{3}$(LHW) volume wood box was adopted. Including this source, the driving part was found out to have a good linearity of sound pressure output vs AC input. We use the Hybrid-Bisect, /Newton-Raphson method modified by the linearity as searching algorithm. Personal computer and program do the control, measurements, and calculations and finally do the accumulation of useful data and results. Several trials of automatic calibration using this developed system give reliable results.

• 한국항행학회논문지
• /
• 제4권2호
• /
• pp.103-113
• /
• 2000

유연체 부착물을 갖는 인공위성의 수학적 모델링에 관한 방법은 몇 가지들이 있다. 본 논문에서는 FEM에 비해 차수가 낮아 계산시간을 줄일 수 있는 근사화 방법중 하나인 추측모드법을 사용한 하이브리드 라그랑지 방정식을 유도하였다. 이것들은 각속도에 관한 세개의 식들과 유연변위에 관한 두개의 식들로 이루어지며, 위성 본체와 태양전지판의 상호작용을 표현한다. 자세제어에 있어서, 제어법칙은 제어입력뿐만 아니라 진동억제를 포함한 성능지수를 최소화하도록 설계하였다. 이 목적을 위해 본 논문은 LQG와 LQG/LTR 제어기를 사용하였고, 결과로는 진동억제를 고려한 소각선회 성능을 보여준다. 특히, 본 논문에서는 특이시스템을 특이값 분리에 의한 비특이시스템 가정법을 통한 LQG/LTR 설계를 보여준다.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.659-667
• /
• 2021

This paper develops the theory for a novel fault-tolerant, permanent magnet biased, 4-active-pole, double plane, homopolar magnetic bearing. The Lagrange Multiplier optimization with equality constraints is utilized to calculate the optimal distribution matrices for the failed bearing. If any of the 4 coils fail, the remaining three coil currents change via a novel distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. Magnetic flux coupling in the magnetic bearing core and the optimal current distribution helps to produce the same c-core fluxes as those of unfailed bearing even if one coil suddenly fails. Thus the magnetic forces and the load capacity of the bearing remain invariant throughout the failure event. It is shown that the control fluxes to each active pole planes are successfully isolated. A numerical example is provided to illustrate the new theory.

• 한국공간구조학회논문집
• /
• 제7권2호
• /
• pp.53-61
• /
• 2007

경간이 길어지고 강성이 유연한 바닥판 구조물은 처짐과 진동에 같은 사용성에 있어서 많은 문제점을 가지고 있다. 따라서 다양한 진동제어 시스템이 제공되고 있으며 TMD와 같은 수동제어 시스템은 적용에 있어서 한계가 있다. 본 논문에서는 MR감쇠기와 TMD를 조합한 준능동 TMD의 제어기법에 따른 제어성능을 알아보았다. 준능동 TMD의 감쇠기를 Groundhook 모델로 모형화한 경우에 주구조물인 바닥판 구조물의 진동제어에 있어서 보다 효과적인 것을 볼 수 있으나 TMD의 변위를 제어해야 하는 경우에 준능동 TMD의 감쇠기를 Skyhook 모델로 모형화하여 진동을 제어할 필요가 있다. 그리고 바닥판 구조물과 TMD를 동시에 제어해야하는 경우에는 Hybrid 제어기법이 우수한 제어성능을 보이고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.538-547
• /
• 2011

이 연구에서는 녹차와 목재섬유를 복합한 친환경 복합보드를 건축내장재로 활용하기 위하여, 목재섬유에 대한 녹차의 배합비율을 달리한 녹차-목재섬유 복합보드를 제작하였고, 복합보드의 동적탄성률에 미치는 녹차의 배합비율 및 바인더로 사용한 접착제의 영향을 조사하였다. 녹차-목재섬유복합보드의 동적탄성률은 녹차를 넣지 않은 대조보드(control boards)의 그것보다 적었고, 녹차배합비율이 증가할수록 커지는 경향을 나타내었다. 또한, 보드제조에 사용된 바인더의 종류에 따라 동적탄성률의 차이가 나타났는데, $E_1$급의 요소수지가 $E_0$급의 요소수지보다 1.06~1.54배의 높은 값을 나타내었으며, 녹차의 배합비율이 커질수록 양자의 차이는 커지는 것이 확인되었다. 한편, 녹차-목재섬유복합보드의 동적탄성률과 휨 강도성능과는 비교적 높은 상관관계가 확인되어 일부 편차가 큰 조건을 제외하고 동적탄성률로부터 정적 휨 강도성능의 예측이 가능할 것으로 확인되었다.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.301-308
• /
• 2008

This paper proposes a method of improving the stability in sensor-less control of permanent magnet synchronous motors. The control method for low-speed region is divided into two: One is a high frequency method, which involves a problem of reverse rotation once misdetection of the permanent magnet polarity should occur, and another one is a current drive method, which has a problem that phase and speed oscillations are caused by quick speed changes. Hence, authors propose adoption of the current drive method for the basic control system with added compensation of stabilization by means of the high frequency method. This combination secures stable control with no risk of reversal and less vibration. In addition, authors have also considered a frequency separation filter of a shorter delay time so that current control performance will not lower even when high frequencies are introduced. This filter has achieved simplified compensation using repetitive characteristic through the utilization of the periodicity of high frequency current. Simulation and experiment have been conducted to verify that the stable performance of this system is improved.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1864-1871
• /
• 2012

This paper proposes the hybrid proportional integral(HBPI) controller for maximum power point tracking(MPPT) control of photovoltaic system. The output characteristics of the solar cell are a nonlinear and affected by a temperature, the solar radiation and influence of a shadow. The MPPT control is a very important technique in order to increase an output and efficiency of the photovoltaic system. The conventional constant voltage(CV), perturbation and observation(PO) and incremental conductance(IC) are the method which finding maximum power point(MPP) by the continued self-excitation vibration, and uses the fixed step size. If the fixed step size is a large, the tracking speed of maximum power point is faster, but the tracking accuracy in the steady state is decreased. On the contrary, when the fixed step size is a small, the tracking accuracy is increased and the tracking speed is slower. Therefore, in order to solve these problems, this paper proposes HBPI controller that is adjusted gain of conventional PI control using fuzzy control, and the maximum power point tracks using this controller. The validity of the controller proposed in this paper proves through the results of the comparisons.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.438-441
• /
• 1997

This paper studies a semi-active suspension with ER damper controlled Fuzzy Net Controller designed GA(Genetic Algorithm). Apparent viscosity of ERF(Electro-Rheological Fluid) can be changed rapidly by applying electric field. Semi-active suspension for ground vehicles are expected to improve ride quality with less vibration. This paper deals with a two-degree -of-freedom suspension using the ER damper for a quarter vehicle system. In this paper, the GA is applied for generating Fuzzy Net Controllers. The GA designs the optimal structure and performance of Fuzzy Net Controller having hybrid structure. Computer simulation results show that the semi-active suspension with ER damper has good performances of ride quality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.760-762
• /
• 2000

Hybrid type LPM can be widely applied in the precise position controlled devic because precise linear motion can be directly obtained by the simple control circuit without backlash in the rotary-type stepping motor. Also, LPM can increase the Position resolution, which was limited by mechanical manufacturing limit and characteristic of magnetic material. using micro-step drive method to decrease the noise and vibration further. Especially, Double-side LPM may be replaced the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. Hence, In this paper, magnetic circuit of double-side LPM was confirmed and static thrust force curve according to the relative displacement between stator and mover, was analyzed by the two dimensional finite element method. From this results, we can suppose the excitation current to be controlled optimally.