• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.261-265
• /
• 2001

In this paper, a current-source type parallel indudor compensated load resonant high-frequency soft switching inverter using IGBTs for driving the newly-produced silent discharge type ozone generating tube and excimer lamp for UV generation which incorporate a single switched capacitor resonant snubber between the port in DC busline side is presented, together with its pulse modulated unique output power regulation characteristics.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.389-392
• /
• 2004

본 연구에서는 단상 5-레벨 cascaded 인버터의 출력 전압 및 전류의 파워 스펙트럼을 광대역으로 분산시키기 위한 멀티 캐리어 RPW(Random PWM)기법을 제안하였다. 제안된 방법은 고정 주파수의 멀티 캐리어 대신에 랜덤한 주파수의 삼각파 캐리어를 사용하고 있다. PD(Phase Disposition)방식 및 H(Hybrid)방식의 멀티 캐리어 RPW을 단상 cascade H-브리지 멀티 레벨 인버터에 적용하였다. 각 방식에 따른 출력 전압과 전류 파형 및 고조파 스펙트럼을 PSIM에 의하여 확인하였으며, 제안된 방식의 타당성을 입증할 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.256-258
• /
• 2008

현재 멀티레벨 인버터는 고압 대용량 시스템에 많이 사용되고 있으며, 연구 또한 지속되고 있다. 현재 일반적으로 사용되는 멀티레벨 방법으로는 Neutral Point Clamp(NPC), H-Bridge 케스캐이드, 플라잉 커패시터가 멀티레벨이 있다. 본 논문에서는 Neutral Point Clamp 토포로지 중 다이오드 클램프 멀티레벨을 이용하여 3상 유도전동기용 하이브리드 다이오드 클램프 멀티레벨 인버터를 구성 하였다. 그리고 신호 발생 방법으로는 Subhamonic PWM 방식을 사용하였으며, 유도 전동기 제어는 간접벡터제어로 제어를 함으로써 유도 전동기 구동용 하이브리드 다이오드 클램프 멀티레벨 인버터의 적합함을 검증 하였다.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.287-289
• /
• 1995

In this paper, We applied the $\mu$-stepping method on the Phase Excitation Sequence of Hybrid type LPM. Linear Pulse Motor can opeate in an open loop control as an effective positioning actuator. PWM driver was used for low power loss and automatically adjusted voltage at rate current. Finally we find that through the position-velocity for timing Triangular and Trapezoidal Profile are very affected by velocity and acceleration parameter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.35-41
• /
• 2009

This paper proposes a stand alone type single-phase fuel cells micro-source with a voltage sag compensator for compensating the ac output voltage variations (sag or swell) of micro-source. The proposed micro-source is consist of a PEM(polymer electrolyte membrane) fuel cells simulator, a full bridge de converter, a 60Hz PWM(pulse width modulation) VSI(voltage source inverter), and a voltage sag compensator. Voltage sag compensator is similar to the configuration of hybrid series active power filter, and it is directly connected to micro-source through the injection transformer. Compensation algorithm of a voltage sag compensator adopts a single phase p-q theory. Effectiveness of the proposed the system is verified by the PSIM(power electronics simulation tool) simulation in the steady state and transient state which the proposed system is able to simultaneously compensate the harmonic current and source voltage sag or swell.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2166-2168
• /
• 1998

A PWM inverter using power FET is developed to switch the excitation current of 5 phase hybrid stepping motor for the use of driving X, Y table. A micro processor based controller is also developed to control the excitation current switching of X, Y axis stepping motor as well as synchronizing operation of Z-axis servo motor. The developed driving control system is applied to the industrial embroidery sewing machine.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.188-192
• /
• 2013

Previous work proposed combining multipulse pulse position modulation (MPPM) with pulse amplitude modulation to form multipulse amplitude and position modulation (MPAPM), which is a hybrid modulation that results in an improvement in bandwidth efficiency but a degradation in power efficiency. In this paper, to achieve greater power efficiency and a better data rate, we propose multipulse dual amplitude-width modulation, based on MPAPM and pulse width modulation. The proposed scheme shows a remarkable improvement in data rate and a 1.5-dB improvement in power efficiency over MPAPM, while sustaining the bandwidth efficiency. After introducing symbol structure, we present the theoretical expressions of spectral efficiency, the power requirements, and the normalized data rate, as well as the results of comparing the proposed modulation to MPPM and MPAPM.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.70-71
• /
• 2017

This paper presents a new cascaded boost multilevel converter topology for distributed generation (DG) systems. Most of DG systems, such as photovoltaic (PV), wind turbine and fuel cells, normally require the complex structure power converters, which makes the system expensive, complex and hard to control. However, the proposed converter topology can generate a much higher output voltage just by using the standard low-voltage switch devices and low voltage DC-sources in a simplified structure, also enhancing the reliability of the switch devices. Simulation and experimental results with a 1.2kW system are presented to validate the proposed topology and control method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.30-37
• /
• 2011

This paper presents a circuit configuration of multilevel inverter to synthesize a large number of output voltage levels by connecting a full-bridge inverter to a 5-level inverter in series. We analyze the characteristics by computer-aided simulations and experiments when it has input voltage sources which have the same and the power of three in the amplitude. In addition, it is compared with the conventional transformer based multilevel inverter.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.189-190
• /
• 2018

본 논문에서는 유도전동기의 토크 리플 및 스위칭 손실 저감을 위해 전압변조기법인 공간벡터변조(Space Vector Pulse Width Modulation, SVPWM) 기법과 불연속전압변조(Discontinuous Pulse Width Modulation, DPWM) 기법을 혼합하여 사용하는 새로운 변조기법을 제안한다. 제안하는 방식은 지령전압이 최대인 부근에서 SVPWM 기법을 사용하며, 나머지 구간에서는 DPWM 기법을 적용한다. 전 구간 단일기법을 적용할 때와 비교하여 제안하는 방식은 토크 리플 및 스위칭 손실을 효율적으로 저감시킬 수 있으며 시뮬레이션을 통해 타당성을 검증한다.