• 전력전자학회논문지
• /
• 제26권1호
• /
• pp.66-73
• /
• 2021

This study presents a novel four-channel light-emitting diode (LED) current balancing topology using a current-fed hybrid quasi-Z-source converter. With the proposed structure, currents flowing through four LED strings are automatically balanced owing to the charge (amp-sec) balance condition on capacitors. Thus, automatic current balancing of the proposed driver is simple and precise. In addition, the proposed LED driver uses only one active switch and three diodes. The operating principle and characteristics of the proposed four-channel LED driver are analyzed in detail. To verify the operation of the proposed LED driver, a prototype is built and tested with different numbers of LEDs.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.760-769
• /
• 2016

본 논문에서는 LED의 색 영역을 확장하기 위해서 Hybrid LED 구동회로와 제어 기법을 제안하였다. 제안된 Hybrid LED 구동회로는 고 전류에서는 스위칭 레귤레이션 동작을 하고 저 전류에서는 리니어 레귤레이션 동작을 함으로써 LED에 일정한 정 전류를 공급하였다. 또한 고 전류와 저 전류의 크기를 각각 CC 제어기법과 PWM 제어기법으로 제어하였다. 제안된 구동회로와 제어 기법으로 RGB LED 각각의 전류를 가변하였고, 전류가 최대 전류대비 2%까지 선형적으로 제어됨 실험을 통해 확인하였다. 게다가 출력된 광색을 CIE1931 색도좌표로 측정하였다. 그 결과 기존의 표현할 수 없었던 색이 균일하게 출력됨을 확인하였으며, 제안된 구동회로와 제어 기법이 저 전류제어가 가능함으로 색 영역 확장이 가능함을 증명하였다.

• 조명전기설비학회논문지
• /
• 제27권3호
• /
• pp.16-25
• /
• 2013

Now it's a trend to install a series of white fluorescent light and orange high pressure sodium lamps because tunnel lighting should be opaque to the safety of drivers from soot, dust, humidity, and fog. Also fluorescent lighting is replaced to LED due to the fact that it improves amenity and object recognition and LED lighting has gradually been improved its nature. In this paper, we have implemented the circuits of the yellow series of high-pressure sodium lamps and white series of LED lights at one board to improve the transparency and recognition of objects. It is possible for inductive high-pressure sodium lamps and the capacitive LED drivers to circuit without power factor compensation. Two circuit parts share only a small number of parts, so low cost LED drivers compared to conventional ones are possible. Therefore, the implementation of the hybrid lighting with high-pressure sodium lamps and LED lights that can be driven at the same time by one driving circuit is possible. The LED capacitive power factor was 0.91 while individually implemented the sodium lamp power factor was 0.98. It shows not only the 2% improvement of hybrid forms but also the efficiency and THD.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6006-6012
• /
• 2012

태양광 가로등 시스템에 사용되는 전원 장치는 배터리 충전을 위한 충전기와 LED Lamp를 구동하기 위한 LED 드라이버로 구성되어 있는데 일반적인 시스템에서는 별도의 전원장치로 구성되어 있다. 본 연구에서는 충전기와 LED 드라이버를 한 개의 전원장치로 구성하였다. 특히 장치의 효율을 높이기 위하여 계통 연계형 태양광 발전시스템에 적용하는 최대전력추적(Maximum Power Point Tracking: MPPT) 방식을 충전기에 적용하였다. LED 드라이버에 필수적인 정전류 방식은 충전기의 전류제어 루틴을 사용하여 구현하였다.

• 산업기술연구
• /
• 제34권
• /
• pp.71-78
• /
• 2014

Recently, using the electronic devices was increased with semiconductor developments. So, the EMI(Electromagnetic interference) problem become to important issue for coexistence with each electronic devices. The EMI is caused by switching operation from the power switches as the FET and the transistor in power conversion devices. In this paper, the hybrid EMI filter that composed with active components and passive components was described. The EMI filter is applied to the 160 watts LED driver experimentally verify the performance. The hybrid EMI filter is compared with non-filter, only passive filter and only active filter. The proposed EMI filter attenuated CM noise more than traditional passive filter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.358-359
• /
• 2013

LED는 우수한 특성으로 인하여 차세대 조명으로 각광받고 있지만, 높은 비용에 따른 시장 활성화가 더딘 상태로서 저가격화 노력이 꾸준히 이루어지고 있다. 현재는 LED조명을 구동하기 위한 정전류 Driver, AC-DC컨버터를 배제시킬 수 있도록 AC 입력으로 LED를 구동하는 기술이 선보이고 있지만, AC성분 특성상 낮은 효율과 역률, 높은 THD의 문제점을 가지고 있다. 본 논문에서는 직렬 콘덴서를 통해 AC 입력전압으로 LED를 구동하는 방식에서 입출력변동에 따른 정전류 제어와 높은 THD를 개선하기 위한 스위칭 기법을 제안하였고, 이러한 회로의 용량성 역률을 보상하기 위하여 유도성 부하인 방전램프(고압나트륨램프)와 결합을 통한 역률을 보상하는 하이브리드 조명회로를 제안하였다.

• 센서학회지
• /
• 제25권2호
• /
• pp.155-159
• /
• 2016

In this work, we have developed a test system to examine whether the charge indicator of the plug-in hybrid electric vehicle (PHEV) works properly or not. In PHEV, the driver should charge the necessary electricity by plugging in manually and be able to know the charging status through the charge indicator conveniently located for the charging individual. Our system used the CAN bus to transmit the same commands from ECU to the indicator to test the proper operation of the indicator lights. It measured the electric current values during operation and analyzed to determine the quality of the indicators. The inspection items included the proper packaging, the electrical shorts, the LED lighting during charging, the LED lighting for charging failure, and the LED lighting when errors occur. We developed the system for the operators in the factory allowing them to approve the test results at the site. We developed the hardware, the control software, and the software to store the test results and the history of the products in the database. Serial numbers were given to the good quality products and the bar code labels were printed to trace the products afterwards. Through this work, we developed a system to inspect the electric parts in real time upon fabrication. We are planning to further improve our system to inspect the brightness of the indicator by adding the vision inspection in future.

• 한국항행학회논문지
• /
• 제21권3호
• /
• pp.220-229
• /
• 2017

본 연구는 다양한 DC 전원을 활용할 수 있는 승압형 DC-DC 컨버터로 설계사양을 통한 인덕터 L과 커패시터 C의 값을 산출하여 PSPICE를 통한 최적의 값을 추정하였다. 승압형 DC-DC 컨버터는 스위치 소자로 IRF840을 사용하였으며 역회복 시간(reverse recovery time)이 뛰어난 쇼트키 다이오드(schottky rectifiers)인 D10SC6M을 사용하여 정전류 제어 (constant current controller)가 가능하도록 구성하였으며 열저항을 고려한 파워 LED 모듈 (power LED module)을 제작하여 구동하였다. 컨버터의 스위칭 주파수는 50 kHz로 최초 듀티비는 10 %에서 출력전압의 검출 값에 따라 점차적으로 증가시키도록 하였다. 그 결과로 승압형 파워 LED 구동기를 시뮬레이션 한 특성은 설계사양과 비교하여 5 %이하의 오차로 근사적으로 나타났고, 입력전압 15 V를 인가하여 안정된 24 V의 안정된 출력전압을 얻었으며 디밍제어 (dimming control)를 통한 밝기 조절 및 소비전류의 조정이 가능하였다.