• 전기학회논문지
• /
• 제61권2호
• /
• pp.263-269
• /
• 2012

In order to present that the electromagnetic compatibility standards following the frequency goes up which is based automotive electronics, in this paper, a hybrid/electric vehicle battery which reflects the frequency of the equivalent circuit model is introduced. By using this circuit modeling, the impedance characteristics can be analysed and an analyze of battery one cell is finished. Using this model, each different from the discharging situation, the discharge characteristic curve could be led. Basic theoretical approaches and measuring results through MATLAB and experimental validation of the EIS measurement equipment was used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 1993

In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

• 센서학회지
• /
• 제21권5호
• /
• pp.329-338
• /
• 2012

This paper presents an effective design method for a gas identification system. The design method adopted the sequential combination between the hybrid genetic algorithms and the TSK fuzzy logic system. First, the sensor grouping method by hybrid genetic algorithms led the effective dimensional reduction as well as effective pattern analysis from a large volume of pattern dimensions. Second, the fuzzy identification sub-models allowed handling the uncertainty of the sensor data extensively. By these advantages, the proposed identification model demonstrated high accuracy rates for identifying the five different types of gases; it was confirmed throughout the experimental trials.

• ETRI Journal
• /
• 제44권6호
• /
• pp.966-976
• /
• 2022

Optical wireless communication, or free space optics, is a promising solution for backhauls in sixth-generation mobile systems. However, the susceptibility of optical links to weather conditions has led to FSO links being furnished with radio frequency (RF) backups. These Hybrid FSO/RF systems provide enhanced link availability but lead to RF resource wastage. Cognitive radio technology, in contrast, is well known for its optimal use of RF resources and may be combined with an FSO link to create a Cognitive Hybrid FSO/RF system. This work uses such a system to analyze a configuration for a mobile backhaul in sixth-generation mobile systems. This configuration can seamlessly coexist with established large scale RF cellular networks. The performance of this configuration is analyzed with respect to outage probability and average bit error by considering the impact of optical channel turbulence, misalignment loss, RF interference, and noise. Mathematical closed-form expressions are verified by simulations.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.543-549
• /
• 2014

A zinc oxide (ZnO) hybrid structure was successfully fabricated on a glass substrate by metal organic chemical vapor deposition (MOCVD). In-situ growth of a multi-dimensional ZnO hybrid structure was achieved by adjusting the growth temperature to determine the morphologies of either film or nanorods without any catalysts such as Au, Cu, Co, or Sn. The ZnO hybrid structure was composed of one-dimensional (1D) nanorods grown continuously on the two-dimensional (2D) ZnO film. The ZnO film of 2D mode was grown at a relatively low temperature, whereas the ZnO nanorods of 1D mode were grown at a higher temperature. The change of the morphologies of these materials led to improvements of the electrical and optical properties. The ZnO hybrid structure was characterized using various analytical tools. Scanning electron microscopy (SEM) was used to determine the surface morphology of the nanorods, which had grown well on the thin film. The structural characteristics of the polycrystalline ZnO hybrid grown on amorphous glass substrate were investigated by X-ray diffraction (XRD). Hall-effect measurement and a four-point probe were used to characterize the electrical properties. The hybrid structure was shown to be very effective at improving the electrical and the optical properties, decreasing the sheet resistance and the reflectance, and increasing the transmittance via refractive index (RI) engineering. The ZnO hybrid structure grown by MOCVD is very promising for opto-electronic devices as Photoconductive UV Detectors, anti-reflection coatings (ARC), and transparent conductive oxides (TCO).

• 원예과학기술지
• /
• 제32권6호
• /
• pp.794-802
• /
• 2014

본 연구는 프리지아 '이본느'를 가지고 매일 오후 5시에서 8시까지 150일 동안 LED(청색, 녹색, 적색, 청색:녹색:적색 혼합)광과 백열등, 메탈할라이드등으로 보광을 함으로써, 꽃눈분화 이후부터 개화가 완전히 종료될 때까지 광질에 따른 장일처리가 프리지아의 생육 및 개화에 미치는 영향을 알아보기 위하여 수행되었다. 엽분열기부터 화뢰형성기까지 초장은 광원별 장일처리에 의해 큰 변화는 없었고 엽수는 메탈할라이드등 처리에서 감소하는 경향이었으나 화뢰 발달기 때 엽 내 엽록소 함량은 메탈할라이드등에서 가장 높았다. LED 청색광과 녹색광에서 개화기가 빨랐는데 특히 녹색광 처리에서 가장 빨라 무처리와 메탈할라이드등에 비해 6-8일 정도 단축되었다. 포장 내 개화기간은 LED 적색광에서 가장 짧아 일시 수확에는 효과적이었다. 메탈할라이드 등에서 절화중, 소화의 길이와 폭 등 절화특성이 우수하였다. 구근의 특성을 조사한 결과 LED 적색광에서는 구폭과 구중이, 백열등 처리에서는 구고와 구중이 감소하였고, 구근 내 전분함량은 모든 시험구 사이에 특별한 차이가 없었다. 결과적으로 개화촉진은 LED 녹색등에서 효과적이었고 개화품질은 메탈할라이드등 처리에서 우수하였다.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7990-8000
• /
• 2015

식물공장은 환경적 조건을 조절하여 계절이나 장소에 관계없이 농산물을 일정하게 생산하는 식물재배 시스템이다. 식물공장에 있어서 내부의 열 유동은 식물공장의 중요한 변수이다. 본 논문에서는 다층 재배선반을 갖는 하이브리드 식물공장 내의 열유동 특성을 수치 시뮬레이션을 통해 연구하였다. 열 유동 특성의 수치해를 얻기 위해 유한체적법(Finite Volume Method)을 이용하였다. 수치해석 모델에 있어서는 저 레이놀드수(low Reynolds number) ${\kappa}-{\epsilon}$ 난류모델을 이용하였으며, 해석방법으로는 비압축성 점성유동 영역과 압력경계 조건을 사용하였다. 수치해석에 있어, 3종류의 유입 공기속도와 재배선반의 위치변화에 따른 식물공장 내의 열유동 특성을 상용 프로그램인 Solid Works Flow simulation을 사용하였다. 수치해석을 통한 결론은 다음과 같다. 첫째, 송풍기를 통한 식물공장 내의 유입 공기속도를 1.6 m/s로 하였을 때, Case 3의 재배선반 배치가 비교적 균일한 온도 분포를 나타내었고, LED광만을 사용한 Case 1의 배치는 시험베드(test bed) TB2와 TB3 영역의 낮은 온도분포로 인하여 서큘레이터 등을 통한 추가적인 온도 제어가 필요할 것으로 판단되었다. 둘째, 식물재배 LED 인공광(DYLED47)의 청색광과 적색광의 비율을 1:1로 100% 구동 시, 재배선반의 평균 온도가 약 $3^{\circ}C$ 증가하였다. 본 논문은 한국산학기술학회 논문지 심사용 투고요령입니다.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.209-220
• /
• 2018

In order to evaluate the effect of hybrid fibers on the flexural performance of tunnel segment at room temperature, twelve reinforced self-consolidating concrete (SCC) symmetric inclination beams containing steel fiber, macro polypropylene fiber, micro polypropylene fiber, and their hybridizations were studied under combined loading of flexure and axial compression. The results indicate that the addition of mono steel fiber and hybrid fibers can enhance the ultimate bearing capacity and cracking behavior of tested beams. These improvements can be further enhanced along with increasing the content of steel fiber and macro PP fiber, but reduced with the increase of the reinforcement ratio of beams. The hybrid effect of steel fiber and macro PP fiber was the most obvious. However, the addition of micro PP fibers led to a degradation to the flexural performance of reinforced beams at room temperature. Meanwhile, the hybrid use of steel fiber and micro polypropylene fiber didn't present an obvious improvement to SCC beams. Compared to micro polypropylene fiber, the macro polypropylene fiber plays a more prominent role on affecting the structural behavior of SCC beams. A calculation method for ultimate bearing capacity of flexural SCC symmetric inclination beams at room temperature by taking appropriate effect of hybrid fibers into consideration was proposed. The prediction results using the proposed model are compared with the experimental data in this study and other literature. The results indicate that the proposed model can estimate the ultimate bearing capacity of SCC symmetric inclination beams containing hybrid fibers subjected to combined action of flexure and axial compression at room temperature.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.7.1-7.14
• /
• 2022

Objectives: This study evaluated the bleaching efficacy of different in-office protocols associated with violet light emitting diode (V-LED), and measured the pulpal temperature rise caused by V-LED with or without gel application. Materials and Methods: Bovine incisors were distributed in 4 groups (n = 10): VL - V-LED; HP - 35% hydrogen peroxide (control); HYB - hybrid protocol, V-LED applied without gel for 10 irradiation cycles followed by V-LED applied with gel for another 10 irradiation cycles; and HPVL - gel and V-LED applied for 20 irradiation cycles. Three bleaching sessions were performed with 7-day intervals. Bleaching efficacy was evaluated with ΔE_ab^*, ΔE₀₀ and ΔWI_D. Data were recorded at baseline, 7, 14, 21 and 70 days. For pulpal temperature rise, thermocouples were placed inside the pulp chamber of human incisors. To determine intrapulpal temperature, the teeth were irradiated with V-LED with or without application of bleaching gel. Color difference data were analyzed by 2-way repeated measures ANOVA and Tukey's test. Pulpal temperature was analyzed by t-test (α = 5%). Results: VL exhibited lower color (ΔE_ab^* and ΔE₀₀) and whiteness changes (ΔWI_D) than the other groups. HPVL presented higher color change values than HYB. HYB and HPVL showed not different ΔWI_D values; and HP showed the highest whiteness changes at all times. There were significant differences comparing ΔT with gel (8.9℃) and without gel application (7.2℃). Conclusions: HPLV was more efficient than HYB. The 2 protocols with VL showed similar results to control. Gel application combined with VL promoted higher pulpal temperature than to the no gel group.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.97-97
• /
• 2010

We demonstrate the hybrid polymer-quantum dot based multi-functional device (Organic bistable devices, Light-emitting diode, and Photovoltaic cell) with a single active-layer structure consisting of CdSe/ZnS semiconductor quantum-dots (QDs) dispersed in a poly N-vinylcarbazole (PVK) and 1,3,5-tirs- (N-phenylbenzimidazol-2-yl) benzene (TPBi) fabricated on indium-tin-oxide (ITO)/glass substrate by using a simple spin coating technique. The multi-functionality of the device as Organic bistable device (OBD), Light Emitting Diode (LED), and Photovoltaic cell can be successfully achieved by adding an electron transport layer (ETL) TPBi to OBD for attaining the functions of LED and Photovoltaic cell in which the lowest unoccupied molecular orbital (LUMO) level of TPBi is positioned at the energy level between the conduction band of CdSe/ZnS and LiF/Al electrode (band-gap engineering). Through transmission electron microscopy (TEM) study, the active layer of the device has a p-i-n structure of a consolidated core-shell structure in which semiconductor QDs are uniformly and isotropically adsorbed on the surface of a p-type polymer core and the n-type small molecular organic materials surround the semiconductor QDs.