• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1391-1404
• /
• 2015

A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.79-88
• /
• 2022

The purpose of this study was to explore which factors should be considered mainly in operating hybrid learning in which offline and synchronous online environments are integrated in elementary education. Using qualitative data through interview and so on for 8 elementary school teachers with experience in operating hybrid learning, major consideration factors were identified. Before class, it is necessary to increase the level of understanding through concrete guidance or education for what the characteristics of hybrid learning are. The redesign of the environment including hardware and software technology is considered because the foundation was not established properly so that effective operation was difficult. In particular, based on the simultaneity and interactivity between the environments, activities which learners can connect and participate in the two environments should be considered. Further, design strategies to guide the operation of teaching and learning will be developed.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.2
• /
• pp.127-139
• /
• 2019

The purported four hybrid origins of Asplenium in Korea were tested based on morphological, cytological and DNA sequence data. Asplenium castaneo-viride, A. ${\times}$ uiryeongse, A. ${\times}$ montanus, and A. ${\times}$ kitazawae share several morphological characteristics with the Asian walking fern A. ruprechtii and related taxa as parents and show a sympatric distribution with the putative parents, raising the possibility of hybrid origins: A. castaneo-viride (A. ruprechtii and A. incisum), A. ${\times}$ uiryeongse (A. ruprechtii and A. pekinense), A. ${\times}$ montanus (A. ruprechtii, A. trichomanes, and A. incisum), and A. ${\times}$ kitazawae (A. ruprechtii and A. sarelii). We investigated flow cytometry and chloroplast DNA sequence data (rbcL, rps4-trnS, and rps4-trnS intergenic spacer) to clarify the hybridization and origin of each hybrid. In the flow cytometry analyses, A. ruprechtii shows diploid (2x) only, whereas A. castaneo-viride (3x, 4x), A. ${\times}$ uiryeongse (3x), A. ${\times}$ montanus (3x, 4x), and A. ${\times}$ kitazawae (2x, 4x) exhibit polyploidy, suggesting hybrid events along speciation. The rbcL and rps4-trnS and rps4-trnS intergenic spacer data suggest that A. ruprechtii is one the maternal ancestors of all four hybrids. In addition, the rps4-trnS and rps4-trnS intergenic spacer data indicate that A. incisum is also the maternal ancestor of A. ${\times}$ kitazawae and A. ${\times}$ montanus, proposing multiple hybridization events for these two hybrids. In A. ${\times}$ montanus, morphological features such as the leaf forms and sympatric distributions of the species also support the multimaternal hypothesis, but the morphological features of A. ${\times}$ kitazawae must be examined with consideration of hybrid events. To clarify the complex hybrid evolutionary lineages of the four Asplenium hybrids, further research with taxon sampling and molecular markers should be conducted.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2492-2512
• /
• 2018

Multicast communication can effectively reduce network resources consumption in contrast with unicast. With the advent of SDN, current researches on multicast traffic are mainly conducted in the SDN scenario, thus to mitigate the problems of IP multicast such as the unavoidable difficulty in traffic engineering and high security risk. However, migration to SDN cannot be achieved in one step, hybrid SDN emerges as a transitional networking form for ISP network. In hybrid SDN, for acquiring similar TE and security performance as in SDN multicast, we redirect every multicast traffic to an appropriate SDN node before reaching the destinations of the multicast group, thus to build up a core-based multicast tree substantially which is first introduced in CBT. Based on the core SDN node, it is possible to realize dynamic control over the routing paths to benefit traffic engineering (TE), while multicast traffic manageability can also be obtained, e.g., access control and middlebox-supported network services. On top of that, multiple core-based multicast trees are constructed for each multicast group by fully taking advantage of the routing flexibility of SDN nodes, in order to further enhance the TE performance. The multicast routing and splitting (MRS) algorithm is proposed whereby we jointly and efficiently determine an appropriate core SDN node for each group, as well as optimizing the traffic splitting fractions for the corresponding multiple core-based trees to minimize the maximum link utilization. We conduct simulations with different SDN deployment rate in real network topologies. The results indicate that, when 40% of the SDN switches are deployed in HSDN as well as calculating 2 trees for each group, HSDN multicast adopting MRS algorithm can obtain a comparable TE performance to SDN multicast.

• Steel and Composite Structures
• /
• v.24 no.3
• /
• pp.287-296
• /
• 2017

The buckling capacity of a radially retractable hybrid grid shell in the closed position was investigated in this paper. The geometrically non-linear elastic buckling and elasto-plastic buckling analyses of the hybrid structure were carried out. A parametric study was done to investigate the effects rise-to-span ratio, beam section, area and pre-stress of cables, on the failure load. Also, the influence of the shape and scale of imperfections on the elasto-plastic buckling loads was discussed. The results show that the critical buckling load is reduced by taking account of material non-linearity. Furthermore, increasing the rise-to-span ratio or the cross-section area of steel beams notably improves the stability of the structure. However, the cross section area and pre-stress of cables pose negligible effect on the structural stability. It can also be found that the hybrid structure is highly sensitive to geometric imperfection which will considerably reduce the failure load. The proper shape and scale of the imperfection are also important.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.345-360
• /
• 2020

Modern swarm intelligence heuristic search methods are widely applied in the field of structural health monitoring due to their advantages of excellent global search capacity, loose requirement of initial guess and ease of computational implementation etc. To this end, a hybrid strategy is proposed based on butterfly optimization algorithm (BOA) and differential evolution (DE) with purpose of effective combination of their merits. In the proposed identification strategy, two improvements including mutation and crossover operations of DE, and dynamic adaptive operators are introduced into original BOA to reduce the risk to be trapped in local optimum and increase global search capability. The performance of the proposed algorithm, hybrid butterfly optimization and differential evolution algorithm (HBODEA) is evaluated by two numerical examples of a simply supported beam and a 37-bar truss structure, as well as an experimental test of 8-story shear-type steel frame structure in the laboratory. Compared with BOA and DE, the numerical and experimental results show that the proposed HBODEA is more robust to detect the reduction of stiffness with limited sensors and contaminated measurements. In addition, the effect of search space, two dynamic operators, population size on identification accuracy and efficiency of the proposed identification strategy are further investigated.

• Journal of The Korean Association For Science Education
• /
• v.28 no.6
• /
• pp.603-617
• /
• 2008

Inspired by the socio-cultural perspective on teaching and learning science, we have explored how the teacher and students interact with one another and develop meanings in science classrooms. Data came from four 10th grade science classrooms, and video recordings and verbatim transcripts of the lessons were analyzed. Focus of the analysis was on the participation structures as well as the possibility of developing the space for hybrid meaning making. The participation structures identified were mainly teacher-led, and students rarely took an active stance to initiate an opportunity for generating new meanings. However, some participation structures had the potential to develop a new discursive space in which hybrid meaning can be constructed through negotiation between participants. Implications for future research and more desirable educational practices were discussed based on the result.

• Structural Engineering and Mechanics
• /
• v.48 no.6
• /
• pp.791-807
• /
• 2013

Ultra High Performance Cementitious Composites with compressive strength 200MPa (UHPCC-200) is proposed for the structural design of super high hybrid wind turbine tower to gain durability, ductility and high strength design objectives. The minimal wall thickness is analyzed using basic bending and compression theory and is modified by a toque influence coefficient. Two cases of wall thickness combination of middle and bottom segment including varied ratio and constant ratio are considered within typical wall thickness dimension. Using nonlinear finite element analysis, the effects of wall thickness combinations with varied and constant ratio and prestress on the structural stress and lateral displacement are calculated and analyzed. The design limitation of the segmental wall thickness combinations is recommended.

• Knowledge Management Research
• /
• v.13 no.3
• /
• pp.55-77
• /
• 2012

Selecting promising technology is becoming more and more difficult due to the increased number and complexity. In this study, we propose hybrid AHP/DEA-AR method and hybrid AHP/DEA-AR-G method to evaluate efficiency of technology alternatives based on ordinal rating data collected through survey to technology experts in a certain field and select efficient technology alternative as promising technology. The proposed method normalizes rating data and uses AHP to derive weights to improve the credibility of analysis, then in order to avoid basic DEA models' problems, use DEA-AR and DEA-AR-G to evaluate efficiency of technology alternatives. In this study, we applied the proposed methods to clean technology and compared with the basic DEA models. According to the result of the comparison, we can find that the both proposed methods are excellent in confirming most efficient technology, and hybrid AHP/DEA-AR method is much easier to use in the process of technology selection.

• The Pure and Applied Mathematics
• /
• v.21 no.3
• /
• pp.195-206
• /
• 2014

In this paper, we consider, under a hybrid iterative scheme with errors, a weak convergence theorem to a common element of the set of a finite family of asymptotically k-strictly pseudo-contractive mappings and a solution set of an equilibrium problem for a given bifunction, which is the approximation version of the corresponding results of Kumam et al.