• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1926-1938
• /
• 2020

We validated the performance of RELAP MOD3.3 code regarding the hybrid SIT with available experimental data. The concept of the hybrid SIT is to connect the pressurizer to SIT to utilize the water inside SIT in the case of SBO or SB-LOCA combined with TLOFW. We investigated how well RELAP5 code predicts the physical phenomena in terms of the equilibrium time, stratification, condensation against Separate Effect Test (SET) data. We also conducted the validation of RELAP5 code against Integrated Effect Test (IET) experimental data produced by the ATLAS facility. We followed conventional approach for code validation of IET data, which are pre-test and post-test calculation. RELAP5 code shows substantial difference with changing number of nodes. The increase of the number of nodes tends to reduce the condensation rate at the interface between liquid and vapor inside the hybrid SIT. The environmental heat loss also contributes to the large discrepancy between the simulation results of RELAP5 and the experimental data.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.223-228
• /
• 2005

The existing mobile communication system called DS/CDMA system, which is serviced widely nowadays, has some problems such as the severe ISI and multiple access interferences under the multi-path fading channel when applied to high-speed data transmission like multimedia transmission. To compensate these problems, we propose a sub-code multi-code hybrid DS/FH (Frequency Hopping) SS (Spread Spectrum) System by combining the multi-code system that restrains the multiple access interference with the hybrid DS/FH SS technique that reduces ISI(Intersymbol Interference) effect for high-speed transmission. Moreover, we implement and propose the sub-code technique to remedy the problems of the generic multi-code system. To verify the performance of the proposed system, the computer simulations are executed under the various channel environments.

• Proceedings of The KACE
• /
• 2017.08a
• /
• pp.57-59
• /
• 2017

대화 시스템(dialogue system)은 텍스트나 음성을 통해 다양한 분야에서 특정한 목적을 수행할 수 있는 시스템이다. 대화 시스템을 구현하기 위한 방법으로 인공 신경망(neural network)을 기반으로한 end-to-end learning 방식이 제안되었다. End-to-end learning 방식을 이용한 식당 예약 시스템 모델의 학습을 위해 페이스북은 영어로 이루어진 식당 예약에 관련된 학습 대화 데이터셋(The 6 dialog bAbI tasks)을 구축하였다. 하지만 end-to-end learning 방식의 학습은 많은 학습 데이터가 필요하다는 단점이 존재하는데, 액션 템플릿(action template)의 정의를 통해 도메인 지식을 표현함으로써 일반적인 end-to-end learning 방식보다 적은 학습량으로 좋은 성능의 모델을 학습할 수 있는 Hybrid Code Network 구조를 제안한 연구가 있다. 본 논문에서는 Hybrid Code Network 구조를 이용하여 한국어 식당 예약 시스템을 구축할 수 있는 방법을 제안하고, 한국어로 이루어진 식당 예약에 관련한 학습 대화 데이터를 구축하는 방법을 제안한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1347-1350
• /
• 2004

현재 디지털 이동통신에서 사용되고 있는 DS/CDMA 방식은 멀티미디어 통신과 같은 고속 데이터 전송에 적용할 경우 다중경로 페이딩 채널하에서 인접심볼간 간섭 및 다중접속간섭이 심해지는 문제점을 갖고 있다. 본 논문에서는 이러한 점을 보안하기 위하여 Hybrid DS/FH CDMA 방식을 이용한 시스템에 고속전송을 위한 Multi-Code 시스템을 적용하여 Hybrid DS/FH Multi-Code Spread Spectrum System을 제안하였으며, 컴퓨터 시뮬레이션을 통하여 성능을 분석 검증 하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2596-2604
• /
• 1997

There are two kinds of backends in ACK:code generator(full-fledged backend) and code expander(fast backend). Code generators generate target code using string pattern matching and code expanders generate target code using macro expansion. ACK translates EM to SPARC code using code expander. The corresponding SPARC code sequences for a EM code are generated and then push-pop optimization is performed. But, there is the problem of maintaining hybrid stack. And code expander is not considered to passes parameters of a procedure call through register windows. The purpose of this paper is to improve SPARC code quality. We suggest a method of SPARC cod generation using EM tree. Our method is divided into two phases:EM tree building phase and code expansion phase. The EM tree building phase creates the EM tree and code expansion phase translates it into SPARC code. EM tree is designed to pass parameters of a procedure call through register windows. To remove hybrid stack, we extract an additional information from EM code. We improved many disadvantages that arise from code expander in ACK.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.195-204
• /
• 2007

The cyclic redundancy check(CRC) code used to decide retransmission request in hybrid automatic repeat request(HRAQ) system can also be used to stop iterative decoding of turbo code if it is used as an error correcting code(ECC) of HARQ system. Thus a scheme to use CRC code for both iteration stop and repeat request in the HARQ system with turbo code based on the standard of cdma 2000 system is proposed in this paper. At first, the optimum CRC code which has the minimum length without performance degradation due to undetected errors is found. And the most appropriate turbo encoder structure is also suggested. As results, it is shown that at least 32-bit CRC code should be used and a turbo code with 3 constituent encoders is considered to be the most appropriate one.

• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.40-43
• /
• 2015

A hybrid mesh based finite volume compressible flow code (PolySim) has been developed recently. Instead of the simple average method for the gradients of variables at each face, the volume average is applied for the calculation of the viscous flux. What is more, an improved Green Gauss method for the calculation of the gradient is also presented. These two techniques will improve both the accuracy and robustness of the code. The aerodynamic performance of this in-house cell centered code is examined by several widely-used bench-mark test cases. These cases include flows over flat plate and RAE 2822 etc. The comparisons on results between calculation and experiment are conducted. They show that the code can produce good numerical results which agree well with the corresponding experiment data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.684-691
• /
• 1996

Since the period of a spreading code in DS/SS communication systems is generally long, it is necessary to make the code acquisition as fast as possible. The code acquisition time can be sued as a measure to evaluate the performance of code acquisition systems. The search rate of serial search codee acquisition system used in the coventional CDMA cellular system is lower than that of the matched filter technique. In order to reduce the code acquisition time, this paper proposes hybrid code acquisition system composed filters combined with serial search blocks. In the proposed system, the matched filter sweeps possible code phases fast and the acquired phase information is verified by the serial search block. The mean and the variance of its acquisition time are calculated and compared with those of double dwell serial search system. The results indicate better performance of the proposed system by yielding its small vaues of the mean and the variance of code acquisition time.

• Advances in aircraft and spacecraft science
• /
• v.5 no.5
• /
• pp.595-613
• /
• 2018

The objective of our study is to analyze the behavior of bonded, riveted and hybrid (bonded / riveted) steel / steel assemblies by tensile tests and to show the advantage of a hybrid assembly over other processes. the finite element method with the ABAQUS numerical code was used to model the fracture behavior of the different assemblies. Cohesive zone models (CZM) have been adopted to model crack propagation in bonded joints using a bilinear tensile separation law implemented in the ABAQUS finite element code. The riveted assemblies were modeled with the XFEM damage method identified in this ABAQUS numerical code. Both CZM and XFEM methods are combined to model hybrid assemblies. The results are consistent with the experimental results and make it possible to guarantee the validity of the applied numerical model. The use of a hybrid assembly shows a high resistance compared to other conventional methods, where the number of rivets has been highlighted. The use of the hybrid assembly improves mechanical strength and increases service life compared to a single lap joint and a riveted joint.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.682-688
• /
• 2006

In this paper, a soft-decision method for initial PN code acquisition in pilot-channel aided Direct Sequence Code Division Multiple Access (DS-CDMA) systems is proposed in order to improve the acquisition performance. We apply this technique to the conventional hybrid search algorithm and analyze it in terms of mean code acquisition time. For the analysis, we present mathematical model of proposed algorithm and also perform the simulation under IMT-2000 channel models. Numerical results show that our proposed scheme outperforms the conventional one by 0.2 - 0.4 sec with respect to the mean code acquisition time because the soft decision technique can mitigate the possible decline in search performance caused by the use of a hard-decision technique.