• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.655-661
• /
• 2016

To develop scab-resistant pear (Pyrus spp.) varieties with fruits that are as crisp and juicy as Asian pears, a cross was made between 'Whangkeumbae' and 'Bartlett' varieties (P. pyrifolia ${\times}$ P. communis) at the Pear Research Institute of the National Institute of Horticultural & Herbal Science, Rural Development Administration, in 1994. Among the 285 seedlings, 'Greensis' was first selected in 2006 for its good eating quality and named in 2012 after regional adaptation tests in nine regions and ten experimental plots from 2007 to 2012. The tree showed a vigorous growth habit and semi-spreading characteristics, like 'Whangkeumbae'. The optimum fruit harvest date was also around Sept. 26 and fruit was round in shape and green in skin color at maturity. Average fruit weight was 470g, and the soluble solids content was $12.4^{\circ}Brix$. The flesh was very crisp and juicy, and had good eating quality. Its' leaf size was similar with 'Bartlett' and smaller than 'Whangkeumbae'. The average of full bloom date of 'Greensis' was determined as Apr. 26, which was six days later than 'Whangkeumbae' and similar with 'Bartlett'. S genotypes of 'Greensis' were identified as $S_4S_e$ by S-allele PCR product sequencing analysis. It seems that the $S_4$ allele was inherited from 'Whangkeumbae' and the Se allele from 'Bartlett'. 'Greensis' displayed strong resistance to scab disease caused by Venturia nashicola, similar to European pear cultivars like 'Beurre Hardy' and, 'Conference'. 'Greensis' was also highly resistant to black leaf spot (Alternaria kikuchiana) in the field

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.181-186
• /
• 2011

Thermal stability of the $TiO_2$ SCR catalyst with W03 loading was investigated in terms of structural and morphological analyses. The $TiO_2$ catalysts with 10 w% $WO_3$ content and without $WO_3$ were prepared. which were heat-treated at $800^{\circ}C$ for 5 h. It was found that the catalytic acidity was decreased by thermal degradation in the $WO_3-TiO_2$ specimen that relatively less than the $TiO_2$ specimen from FT-IR analysis. The phase transition of the $TiO_2$ catalyst from anatase to rutile was increased by heal-treatment, and the percentage of the rutile phase was 28.4 % in the $WO_3-TiO_2$ and 22.9 % in the $TiO_2$. A shell region of $WO_3$ distinguished from a $TiO_2$ particle was also observed in the grain boundary region, and the $WO_3$ led to the suppression of grain growth. It could be confirmed that the suppression of grain growth can contribute to the improvement of catalytic properties for thermal stability more than the increase of anatase-rutile phase transformation which cause the reduction of the catalytic activity in the $TiO_2$ SCR catalyst by the presence of $WO_3$.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.12-23
• /
• 2009

To verify hybridity of Asplenium castaneo-viride, external morphology, spore morphology, anatomy and chromosomes of the species and of the two presumed parental species, A. incisum and A. ruprechtii, were examined. A. castaneo-viride usually had 1-pinnately divided frond. However, some individuals had almost simple fronds with pinnatisect basal parts similar to A. ruprechtii, while others had fronds similar to A. incisum in having oblanceolate blades and basal pinnae with triangular, 2-3 lobed apices. On the surface of the spores, sculpturing consisted of folds that were usually prominent; forming long wings, and irregular or incomplete reticulation. However, reticulation patterns varied among species. A. castaneo-viride showed a wide range of variation from sparse to dense patterns, whereas A. incisum showed only from sparse to intermediate patterns. A. ruprechtii showed from intermediate to dense patterns. The spore size of A. castaneo-viride was $54.63{\mu}m$, larger than other two species ($47.81{\mu}m$ in A. incisum and $44.22{\mu}m$ in A. ruprechtii). The level of undulation of epidermal cell wall was also different. A. incisum had the most shallowly undulated wall, and A. castaneo-viride had a pattern intermediate between the two presumed parental species. This same patterns was recognized in the density of stomata. The density of $45.91/mm^2$ in A. castaneo-viride was intermediate between the two presumed parental species ($67.00/mm^2$ in A. incisum, and $37.86/mm^2$ in A. ruprechtii). Chromosome number was constant (2x =2n = 72) as in A. incisum and A. ruprechtii. However, A. castaneo-viride showed a different ploidy level. The populations of Mt. Mai (Jeonbuk province) and Mt. Duryun (Jeonnam province) were diploid (2n = 72) which is a new record for this taxon, whereas the population of Mt. Buram (Seoul) was tetraploid (2n = 144). Conclusively, A. castaneo-viride was revealed to be a hybrid of A. ruprechtii and A. incisum based on evidence involving leaves, spores, epidermal cells, stomata and chromosome number.

• The Plant Pathology Journal
• /
• v.19 no.5
• /
• pp.248-252
• /
• 2003

This study was carried out to evaluate potential of Shiranuhi cultivar against inoculation of causal pathogen of citrus canker, Xanthomonas axonopodis pv. citri in Jeju Island by comparing degree of susceptibility of fruits and leaves/twigs, and analysis of incidence of canker disease. Progression of symptom, disease incidence, and percent area of lesion were surveyed for evaluation of resistance. In greenhouse condition, symptoms of bacterial citrus canker progressed more rapidly in sweet orange, a moderately susceptible cultivar, than in other four cultivars (satsuma mandarin, 'Kiyomi', 'Shiranuhi' and 'Yuzu'). At 20 days after inoculation, disease severity was the highest in sweet orange (5.0$\pm$0.0), and all tested leaves were distorted or had dropped. On the other hand, 'Yuzu' showed the lowest disease severity (2.6$\pm$0.47), followed by 'Kiyomi' (4.0$\pm$0.0), 'Shiranuhi' (4.0$\pm$0.82), and satsuma mandarin (4.3$\pm$0.47). Percent area of lesion per leaf 30 days after inoculation was the highest in sweet orange (8.31$\pm$1.78), followed by satsuma mandarin (1.51$\pm$1.25), 'Shiranuhi' (1.39$\pm$0.94), and 'Kiyomi' (1.1$\pm$0.9), while the lowest was in 'Yuzu' (0.26$\pm$0.17). Infield condition, percentage of diseased leaf in 'Shiranuhi' was very low, 5.2$\pm$2.9, compared with sweet orange, 71.0$\pm$ 11.5, while that of satsuma mandarin and 'Kiyomi' were 6.9$\pm$7.0 and 4.3$\pm$2.0, respectively. Percentages of diseased leaf was higher (17.4$\pm$7.1) than that of diseased fruit (3.2$\pm$2.5) in severely diseased trees of Shiranuhi cultivar, and the disease was not observed on twig in open field condition. Lesion sizes on leaves and fruits in open field condition were 4.1$\pm$2.2 mm2 and 5.1$\pm$5.6 mm2, respectively, while those in greenhouse condition were 8.7$\pm$5.7 mm2, 10.4$\pm$9.2 mm2 and 5.6$\pm$2.6 mm2 on leaves, fruits and twigs, respectively. The disease was observed in 5.6% out of total 107 farmers Shiranuhi fields under polyethylene film house, and average percentages of diseased tree in 31 fields of Shiranuhi cultivar and adjacent satsuma mandarin fields were 0.02% and 14.8%, respectively. Average percentage of diseased fruit was 1.6% in satsuma mandarin which was not observed in anyone of all the 31 Shiranuhi farmers fields. Therefore, it was concluded that 'Shiranuhi' cultivar is not potential against causal pathogen of citrus canker disease in Jeju Island because the cultivar has similar resistance as satsuma mandarin which occupies over 95% of total 25,000 ha in Jeju Island in polyethylene film houses protected from outside.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.277-282
• /
• 2010

The study is to verify non-uniform dose distribution in Field-In-Field (FIF) technique using two-dimensional ionization chamber (MatriXX, Wellhofer Dosimetrie, Germany) for breast tangential irradiation. The MatriXX and an inverse planning system (Eclipse, ver 6.5, Varian, Palo Alto, USA) were used. Hybrid plans were made from the original twenty patients plans. To verify the non-uniform dose distribution in FIF technique, each portal prescribed doses (90 cGy) was delivered to the MatriXX. The measured doses on the MatriXX were compared to the planned doses. The quantitative analyses were done with a commercial analyzing tool (OmniPro IMRT, ver. 1.4, Wellhofer Dosimetrie, Germany). The delivered doses at the normalization points were different to average 1.6% between the calculated and the measured. In analysis of line profiles, there were some differences of 1.3-5.5% (Avg: 2.4%), 0.9-3.9% (Avg: 2.5%) in longitudinal and transverse planes respectively. For the gamma index (criteria: 3 mm, 3%) analyses, there were shown that 90.23-99.69% (avg: 95.11%, std: 2.81) for acceptable range ($\gamma$-index $\geq$ 1) through the twenty patients cases. In conclusion, through our study, we have confirmed the availability of the FIF technique by comparing the calculated with the measured using MatriXX. In the future, various clinical applications of the FIF techniques would be good trials for better treatment results.

• Korean Security Journal
• /
• no.19
• /
• pp.225-244
• /
• 2009

Electronic security system is composed mainly of electronic-information-communication device, so system technology, configuration and management of the electronic security system could be affected by the change of information-communication environment. This study is to propose the future prospect on the development of technique for electronic security system through the analysis of the trend and the actual condition on the development of technique. This study is based on literature study and interview with user and provider of electronic security system, also survey was carried out by system provider and members of security integration company to come up with more practical result. Hybrid DVR technology that has multi-function such as motion detection, target tracking and image identification is expected to be developed. And 'Embedded IP camera' technology that internet server and image identification software are built in. Those technologies could change the configuration and management of CCTV system. Fingerprint identification technology and face identification technology are continually developed to get more reliability, but continual development of surveillance and three-dimension identification technology for more efficient face identification system is needed. As radio identification and tracking function of RFID is appreciated as very useful for access control system, hardware and software of RFID technology is expected to be developed, but government's support for market revitalization is necessary. Behavior pattern identification sensor technology is expected to be developed and could replace passive infrared sensor that cause system error, giving security guard firm confidence for response. The principle of behavior pattern identification is similar to image identification, so those two technology could be integrated with tracking technology and radio identification technology of RFID for total monitoring system. For more efficient electronic security system, middle-ware's role is very important to integrate the technology of electronic security system, this could make possible of installing the integrated security system.

• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.261-271
• /
• 2016

Citrus is an economically important fruit crop widely growing worldwide. However, citrus production largely depends on natural hybrid selection and bud sport mutation. Unique botanical features including long juvenility, polyembryony, and QTL that controls major agronomic traits can hinder the development of superior variety by conventional breeding. Diverse factors including drastic changes of citrus production environment due to global warming and changes in market trends require systematic molecular breeding program for early selection of elite candidates with target traits, sustainable production of high quality fruits, cultivar diversification, and cost-effective breeding. Since the construction of the first genetic linkage map using isozymes, citrus scientists have constructed linkage maps using various DNA-based markers and developed molecular markers related to biotic and abiotic stresses, polyembryony, fruit coloration, seedlessness, male sterility, acidless, morphology, fruit quality, seed number, yield, early fruit setting traits, and QTL mapping on genetic maps. Genes closely related to CTV resistance and flesh color have been cloned. SSR markers for identifying zygotic and nucellar individuals will contribute to cost-effective breeding. The two high quality citrus reference genomes recently released are being efficiently used for genomics-based molecular breeding such as construction of reference linkage/physical maps and comparative genome mapping. In the near future, the development of DNA molecular markers tightly linked to various agronomic traits and the cloning of useful and/or variant genes will be accelerated through comparative genome analysis using citrus core collection and genome-wide approaches such as genotyping-by-sequencing and genome wide association study.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.71-73
• /
• 2000

Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).