• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1119-1127
• /
• 2007

This paper is concerned with a performance analysis using a wired/wireless hybrid network based on Common Industrial Protocol(CIP). For the performance analysis, the data transmission time, average end-to-end delay and throughput between DeviceNet and the wireless devices are investigated. The experimental results show the performance in terms of the polling/COS service time of CIP based hybrid network.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.273-276
• /
• 2005

Performance analysis of a solid oxide fuel cell/micro gas turbine hybrid system is conducted at design-point and part-load conditions and its results are discussed in this study. With detailed considerations of the heat and mass transfer phenomena along various flow streams of the SOFC, the analysis based on a quasi-2D model reasonably predicts its performance at the design-point operating conditions. In case of part-load operations, performance of the hybrid system to three different operation modes(fuel only control, speed control, and VIGV control) is compared. It is found that the simultaneous control of both supplied fuel and air to the system with a variable MGT rotational speed mode is the optimum choice for the high performance operation. And then, the dynamic characteristics of a solid oxide fuel cell are briefly introduced.

• 한국지진공학회논문집
• /
• 제22권7호
• /
• pp.361-367
• /
• 2018

This study investigates the seismic performance of a hybrid seismic energy dissipation device composed of a viscoelastic damper and a steel slit damper connected in parallel. A moment-framed structure is designed without seismic load and is retrofitted with the hybrid dampers. The model structure is transformed into an equivalent simplified system to find out optimum story-wise damper distribution pattern using genetic algorithm. The effectiveness of the hybrid damper is investigated by fragility analysis of the structure with and without the dampers. The analysis results show that after seismic retrofit the probability of reaching damage states, especially the complete damage state, of the structure turn out to be significantly reduced.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.61-66
• /
• 2014

This paper described on the motion of hybrid tractor trajectory for powertrain system. The dynamics behavior used to the tractor according to the characteristics of the road surface using $Daful^@$ analysis. The tractor industry is facing to a big problem about rising gas price and exhaust gas environment. Because it was possible overcoming the past drawback, hybrid vehicle had been decided as the best technical way since it has started operating the internal combustion engine with the electric power as the motive power. The vehicle structures have designed the model of a major power transmission factor. The simulation realized in this paper that motion of tractor being turned by torque and force of each joints. Driving characteristics, especially in recent years, IVHS (Intelligent Vehicle Tractor / System) technology, while receiving a lot of attention because of the tractor and the need to pursue high function is emerging as a more and more.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.493-498
• /
• 2003

The 3D nonlinear analysis for steel-concrete hybrid deck is carried out by utilizing 2D plane interface element. The effect of the slip occurred between steel and concrete can be modeled by this element. This analysis focuses on not only global behavior of steel-concrete hybrid deck but also local behaviors of members of it such as lower steel plate, I-beam, and concrete which are varied by slip modulus. In this analysis, it was founded that the limit slip modulus could classify the states of steel-concrete hybrid deck into three parts such as full-composite, partial-composite, and non-composite, considering the behavior of lower steel plate, I-beam, and concrete at the mid span and the support as well as the yield load and ultimate load of it.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.510-519
• /
• 2015

Concerning the issue of high-dimensions, hybrid uncertainties of randomness and intervals including implicit and highly nonlinear limit state function, reliability analysis based on the hybrid uncertainty reliability mode combining with back propagation neural network (HU-BP neural network) is proposed in this paper. Random variables and interval variables are as input layer of the neural network, after the training and approximation of the neural network, the response variables are obtained through the output layer. Reliability index is calculated by solving the optimization model of the most probable point (MPP) searching in the limit state band. Two numerical cases are used to demonstrate the method proposed in this paper, and finally the method is employed to solving an engineering problem of the aerospace friction plate. For this high nonlinear, small failure probability problem with interval variables, this method could achieve a good analysis result.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권1호
• /
• pp.71-77
• /
• 2016

Purpose: Root cause analysis (RCA) refers to any systematic process that identifies the causes that contribute to a focus event. The immediate cause of a focus event is often a symptom of underlying causes and may not truly identify the root causes that should be identified and addressed. Currently many RCA tools are available. Different investigators use different RCA tools on different issues. No standardized or commonly agreed way to analyse root causes exists. The purpose of this study is to propose the methodology of RCA process commonly useable for various issues. Methods: The methodology of RCA process is produced based on the hybrid RCA tools. The effectiveness assessment matrix of actions through the root cause candidates is presented. Results: No single RCA technique proposed has so far covered all necessary aspects. A hybrid approach which combines the best features of various techniques is proposed. The effectiveness assessment matrix helps us to identify the root cause to correct or eliminate system vulnerabilities effectively. Conclusion: This hybrid approach and effectiveness assessment matrix can provide guidance of RCA process across many industries and situations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.27-29
• /
• 1995

This paper presents the design and characteristics analysis of induction machine for diesel-electric hybrid vehicle powertrain. Diesel-electric hybrid vehicles are very efficacious in reduction of consumption energy, environment pollution and saftly yields with high dynamic of machines. However, their sophisticated construction requires from designers both complex made-technology and control strategy which would be able to put into practice this requirements. These problems are still considered in processing the design and analysis of induction machine. The requirements for a given volume, input power to weight ratio, high efficiency and wide speed range are met by the induction machine.

• International Journal of Advanced Culture Technology
• /
• 제11권3호
• /
• pp.297-301
• /
• 2023

The study identified the various causes of odor problems, the discomfort they cause, and the importance of the public health and environmental issues associated with them. To solve the odor problem, you must identify the cause and perform an accurate analysis. Therefore, we proposed a CNN-Transformer hybrid model (CTHM) that combines CNN and Transformer and evaluated its performance. It was evaluated using a dataset consisting of 120,000 odor samples, and experimental results showed that CTHM achieved an accuracy of 93.000%, a precision of 92.553%, a recall of 94.167%, an F1 score of 92.880%, and an RMSE of 0.276. Our results showed that CTHM was suitable for odor analysis and had excellent prediction performance. Utilization of this model is expected to help address odor problems and alleviate public health and environmental concerns.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.879-888
• /
• 1999

보다 선뢰적인 정보전송을 위하여 데이터 에러를 제어하기 위한 ARQ 기법의 연구는 중요하다. 특히 위성 통신에서는 긴 전송 지연시간에 의하여 성능의 차이가 크게 나타나므로 본 논문에서는 전송 지연시간을 중심으로 프레임의 길이. 채널용량, BER의 변화에 따른, SR ARQ와 기존의 고정된 코딩율을 갖는 type- I h hybrid ARQ 방식의 성능분석을 하였다. Type-I hybrid ARQ 방식에 사용되는 FEC(Forward Error Control) 방식으로는 BCH 코드를 사용하였고 BCH 코드율과 Window 크기. 데이터 속도 등 여러 가지 파라미터에 따 른 throughput을 분석하였다. 특히 기존의 SA W(Stop and Wait) ARQ의 식을 바탕으로 전송지연시간이 고 려된 type-I hybrid ARQ의 성능 관계식을 유도하였다. 다양한 전송 지연시간이 고려된 type-I hybrid ARQ 의 성능을 수치해석과 더불어 시뮬레이션을 통해 분석하여, 중요한 특성 결과를 얻게 되었다.