• Title/Summary/Keyword: Hv

Search Result 1,031, Processing Time 0.034 seconds

Fertilizer and Organic Inputs Effects on CO2 and CH4 Emission from a Soil under Changing Water Regimes (토양 수분 변동 조건에서 시비 및 유기물 투입에 따른 CO2와 CH4 방출 특성)

  • Lim, Sang-Sun;Choi, Woo-Jung;Kim, Han-Yong
    • Korean Journal of Environmental Agriculture
    • /
    • v.31 no.2
    • /
    • pp.104-112
    • /
    • 2012
  • BACKGROUND: Agricultural inputs (fertilizer and organic inputs) and water conditions can influence $CH_4$ and $CO_2$ emission from agricultural soils. This study was conducted to investigate the effects of agricultural inputs (fertilizer and organic inputs) under changing water regime on $CH_4$ and $CO_2$ emission from a soil in a laboratory incubation experiment. METHODS AND RESULTS: Four treatments were laid out: control without input and three type of agricultural inputs ($(NH_4)_2SO_4$, AS; pig manure compost, PMC; hairy vetch, HV). Fertilizer and organic inputs were mixed with 25 g of soil at 2.75 mg N/25 g soil (equivalent to 110 kg N/ha) in a bottle with septum, and incubated for 60 days. During the first 30-days incubation, the soil was waterlogged (1 cm of water depth) by adding distilled water weekly, and on 30 days of incubation, excess water was discarded then incubated up to 60 days without addition of water. Based on the redox potential, water regime could be classified into wetting (1 to 30 days), transition (31 to 40 days), and drying periods (41 to 60 days). Across the entire period, $CH_4$ and $CO_2$ flux ranged from 0 to 13.8 mg $CH_4$/m/day and from 0.4~1.9 g $CO_2$/m/day, and both were relatively higher in the early wetting period and the boundary between transition and drying periods. During the entire period, % loss of C relative to the initial was highest in HV (16.4%) followed by AS (8.1%), PMC (7.5%), and control (5.4%), indicating readily decomposability of HV. Accordingly, both $CH_4$ and $CO_2$ fluxes were greatest in HV treatment. Meanwhile, the lower $CH_4$ flux in AS and PMC treatments than the control was ascribed to reduction in $CH_4$ generation due to the presence of oxidized compounds such as ${SO_4}^{2-}$, $Fe^{3+}$, $Mn^{4+}$, and ${NO_3}^-$ that compete with precursors of $CH_4$ for electrons. CONCLUSION: Green manure such as HV can replace synthetic fertilizer in terms of N input, however, it may increase $CH_4$ emission from soils. Therefore, co-application of green manure and livestock manure compost needs to be considered in order to achieve satisfactory N supply and to mitigate $CH_4$ and $CO_2$ emission.

Photosensitivity in Hydroa Vacciniforme Is A Photo- Koebner Phenomenon Induced by Infiltration of Epstein-Barr Virus-Infected NK/T Cells

  • Keiji Iwatsuki;Xu, Zi-Gang;Mikio Ohtsuka;Takenobu Yamamoto;Kazuyasu Fujii;Kazuhide Tsuji
    • Journal of Photoscience
    • /
    • v.9 no.2
    • /
    • pp.233-235
    • /
    • 2002
  • Hydroa vacciniforme (HV) is a disease of Epstein-Barr virus (EBV)-associated NK/T cell lymphoproliferative disorder, and patients with severe HV-like eruptions have a high risk to progress to various EBV-related hematological complications. Photosensitivity in HV might be a 'photo-Koebner' phenomenon mediated by infiltration of EBV-infected NK/T cells.

  • PDF

Isolation and Characterization of a Methylotroph Producing 3-hydroxybutyrate-3-hydroxyvalerate Copolymer

  • JUNG HOE KIM;KIM, PIL;SEON WON KIM;GYUN MIN LEE;HYUN SOO LEE
    • Journal of Microbiology and Biotechnology
    • /
    • v.5 no.3
    • /
    • pp.167-171
    • /
    • 1995
  • A bacterial strain C-02 using methanol as a carbon source was isolated from Gumi Industrial Estate and selected based on its rapid growth and capability of poly-$\beta$-hydroxybutyrate accumulation. Characteristics of strain C-02 showed that it belongs to the Methylococcaceae family, Type II subgroup. Strain C-02 could incorporate valerate into the PHB chain to form 3-hydroxybutyrate and 3-hydroxyvalerate (P(3HB-co-3HV)). Among various nutrient limitation tests, the nitrogen limitation test resulted in the highest content of P(3HB-co-3HV) per dry cell weight, 50$%$. Under the nitrogen limited condition, the average molecular weight of P(3HB-co-3HV) obtained was determined to be approximately $2.8\times 10^5$ daltons.

  • PDF

On-line and Off-line Partial Discharge Monitoring System with HVAC Testing (HVAC에 의한 On-line, Off-line PD 모니터링)

  • Choi, Yong-Sung;Lee, Kyung-Sup
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.04c
    • /
    • pp.111-114
    • /
    • 2008
  • The paper considers the relation between on-line monitoring and diagnostics on the one hand and high-voltage (HV) withstand and partial discharge (PD) on-site testing on the other. HV testing supplies the basic data (fingerprints) for diagnostics. In case of warnings by on-line diagnostic systems, off-line withstand and PD testing delivers the best possible information about defects and enables the classification of the risk. Because alternating voltage (AC) is the most important test voltage, the AC generation on site is considered. Frequency tuned resonant (ACRF) test systems are best adapted to on-site conditions. They can be simply combined with PD measuring equipment. The available ACRF test systems and their application to electric power equipment -from cable systems to power transformers - is described.

  • PDF

Polyhydroxyalkanoic Acid Production by Alcaligenes sp. GB-77 (Alcaligenes sp. GB-77 에 의한 Polyhydroxyalkanoic Acid의 생산)

  • 김근배;손홍주;이상준
    • Microbiology and Biotechnology Letters
    • /
    • v.23 no.2
    • /
    • pp.220-228
    • /
    • 1995
  • For polyhydroxyalkanoic acid (PHA) production, several microorganisms were isolated from sewage sludge. One of them, GB-77 strain, was chosen from its PHB/HV copolymer production on only fructose without cosubstrate. The isolated strain GB-77 was identified as the genus Alcaligenes. Optimal temperature and pH for cell growth were 36C and 6.8. Optimal medium composition was 10 g/l of fructose and 5 g/l of polypeptone, 1 $\times$ 10$^{-2}$M Na$^{2}$HP0$^{4}$, 1.3 $\times$ 10$^{-2}$M KH$^{2}$PO$^{4}$. To investigate the optimal condition for polyhydroxyalkanoic acid production two-stage culture technique was used; first stage for cell growth and second stage for PHA production on unbalanced growth conditions. Optimal conditions for high PHA production were C/N ratio 50, temperature 36$\circ$C and pH 6.8. To overcome fructose inhibition on cell growth, intermittent feeding fed-batch culture technique was used. Total cell concentration was 17.4 g/l with 9.1 g/l of PHA. The purified PHA was identified PHB/HV copolymer by NMR analysis.

  • PDF

Copolyester of 3-Hydroxybutyrate and 3-Hydroxyvalerate Produced by Methylobacterium sp. GL-10 (Methylobacterium sp. GL-10이 생산하는 3-Hydroxybutyrate와 3-Hydroxyvalerate의 Copolyester)

  • 이호재;박진서;이용현
    • Microbiology and Biotechnology Letters
    • /
    • v.19 no.1
    • /
    • pp.94-99
    • /
    • 1991
  • - The further study for the identification of the previously reported pink-pigmented facultative methylotrophic bacterium (PPFM) GL-10 was carried out. The PPFM GL-10 was Gram nagative, rod, and motile by a single polarly inserted flagellum. The colonies were smooth, pink, circular, along with convex with entire margin. The isolate could utilize C1 compounds and a variety of multicarbon substrates as sole carbon and energy source. The isolate was obligately aerobic, and exhibited both catalase and oxidase activities. The deoxyribonucleic acid base composition was 65-67 mol% guanine plus cytosine. The isolate was mostly identical with Methylobacterium extorquens and named Methylobacterium sp. strain GL-10. Methylobacterium GL-10 accumulated a copolyester of 3-hydroxybutyrate and 3-hydroxyvalerate (poly-3HB/3 HV) when grown in nitrogen-free culture media containing sodium propionate as substrate at the second polyester accumulation stage. The composition of copolyester, as determined from $^1h$ NMR spectra, was 23 mol% of 3-hydroxyvalerate (3HV).

  • PDF

Monitering of Ostreid herpesvirus in Pacific oyster, Crassostrea gigas (굴의 Ostreid Herpesvirus 모니터링)

  • Lee, Ye-Suk;Kim, Mee-Sun;Park, Jung-Jun;Seo, Jung-Soo;Kwon, Mun-Kyoung;Hwang, Jee-Youn
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.26 no.5
    • /
    • pp.1075-1082
    • /
    • 2014
  • Monthly Screening of Pacific oyster, Crassostrea gigas, was surveyed by PCR for Ostreid herpesvirus(OsHV-1) infections from 2012 to 2013 in Korea. It was showed positive results in one hatchery in April and May 2012 and in oyster farming areas from August to November in 2013. The obtained sequences showed 99.3~99.5% homology with OsHV-1 ${\mu}var$(Accession Number: HQ842610) and 96.2~96.3% homology with OsHV isolated from Korea(Accession Number: AY509253).

A Study on the Surface Hardening in Low Alloy Steels using Plasma Nitriding (플라즈마 질화를 이용한 저합금강의 표면강화 연구)

  • 김동원;정진묵;이원종
    • Korean Journal of Crystallography
    • /
    • v.10 no.1
    • /
    • pp.13-19
    • /
    • 1999
  • 저합금강인 SCM415강에 대한 플라즈마 질화의 변수에 따른 질화특성을 관찰하여 최적공정을 확립한 후 기존의 질화법인 염욕질화와 가스질화 되어진 시편과 피로특성을 비교하였다. 가스조정비는 질소대 수소의 비가 3:1일 때 가장 높은 표면강도를 가지며, 온도는 높아질수록 표면강도는 낮아지고 유효경화깊이는 깊어지는 것을 알 수 있었다. 또한 질화시간이 증가될수록 표면경도는 낮아지고 유효경화깊이는 깊어졌다. 본 플라즈마 질화장비에서의 최적공정조건은 공정온도 500℃, 공정시간 4시간, 질소와 수소의 비가 3:1으로 관찰되었고, 이 때 표면경도는 1181 Hv, 화합물층의 깊이 17 ㎛, 유효경화깊이 450 ㎛로 측정되었다. 가스질화 되어진 시편의 표면경도는 945 Hv, 유효경화깊이 250 ㎛였고, 염욕질화 되어진 시편의 경우는 각 846 Hv, 300㎛으로 관찰되었다. 또한 플라즈마 질화공정을 거친 질화강과 가스질화, 염욕질화 되어진 질화강의 피로특성을 평가한 결과 플라즈마 질화강이 가스질화, 염욕질화 되어진 질화강에 비하여 1.5∼2배의 우수한 피로특성을 나타내었다.

  • PDF

Production of Poly-3-Hydroxyalkanhoate by Haloarcular sp. EH-1 (Haloarcular sp. EH-1으로부터 생분해성 Poly-3-Hydroxyalkanoate의 생산)

  • 정명주;박형숙
    • Journal of Life Science
    • /
    • v.9 no.6
    • /
    • pp.737-742
    • /
    • 1999
  • The extremely halophilic archaebacterium Haloarcular sp. EH-1 was isolated from solar salts. Haloarcular sp. EH-1 accumulated poly(3-hydroxyalkanoate) (PHA) as intracellular granules. PHA production in batch culture have been studied. The PHA was identified as poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHB/HV) of 3-hydroxybutyric acid and 3-hydroxyvaleric acid by the analysis of GC, IR and NMR. The melting temperature of PHB/HV was 152.46$^{\circ}C$, viscosity was 1.25 ㎗/g, and molecular weight was $1.44 X 10^5.$

  • PDF

Suppression Techniques of Subthreshold Hump Effect for High-Voltage MOSFET

  • Baek, Ki-Ju;Na, Kee-Yeol;Park, Jeong-Hyeon;Kim, Yeong-Seuk
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.13 no.5
    • /
    • pp.522-529
    • /
    • 2013
  • In this paper, simple but very effective techniques to suppress subthreshold hump effect for high-voltage (HV) complementary metal-oxide-semiconductor (CMOS) technology are presented. Two methods are proposed to suppress subthreshold hump effect using a simple layout modification approach. First, the uniform gate oxide method is based on the concept of an H-shaped gate layout design. Second, the gate work function control method is accomplished by local ion implantation. For our experiments, $0.18{\mu}m$ 20 V class HV CMOS technology is applied for HV MOSFETs fabrication. From the measurements, both proposed methods are very effective for elimination of the inverse narrow width effect (INWE) as well as the subthreshold hump.