• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.1779-1782
• /
• 2009

본 개발 시스템은 적외선 센서 네트워크 시스템을 통해 RS-232 통신 수신 데이터(각 인큐베이터의 온도, 습도)를 얻고, 각 채널 당 각각의 사람에 대한 감시 시스템이 작동된다. 이 감시 시스템은 TCP/IP 통신을 통한 PDA 뿐만이 아니라 개인용 컴퓨터에도 작동된다. 이 시스템은 LabVIEW와 PDA 모듈의 통신 함수에서 활성화되어 작동되며, 다른 도구를 이용하는 것보다 처리시간이 상당히 절약된다.

• Advances in Energy Research
• /
• 제7권2호
• /
• pp.123-134
• /
• 2020

Photovoltaic systems are progressively attached importance and their installed capacity increases day by day because of their reliability, decremented installation and operating cost and simple construction structure. Generated power obtained from a photovoltaic system changes depending upon regional distinctness, and It can be estimated approximately by taking into consideration mean global radiation amount, temperature and humidity. However, there may be different regional negative or positive factors like dust, air pollution, desert powder which affect generated power. The best reliable data for a region can be obtained from the existing photovoltaic system in the region. For this purpose, a monitoring system for 1000W monocrystalline photovoltaic system constructed at Kocaeli University Uzunciftlik Nuh Cimento Vocational High Scholl is prepared. The installed monitoring system shows and records real values generated from the photovoltaic system and environmental data. In the study, Instantaneous data obtained from the monitoring system for October 2018 and 7th October 2018 is given within figures. Additionally, daily and monthly total energy productions of the photovoltaic system are given for October 2018 and date interval between July 2018 and March 2018, respectively.

• 한국ITS학회 논문지
• /
• 제21권4호
• /
• pp.157-166
• /
• 2022

IoT 기술 중에서 가장 많이 쓰이는 무선 통신 기술에는 ZigBee, WiFi, Bluetooth, Z-Wave 등이 있다. 그 중에서 Z-Wave는 현재 세계 시장 점유율이 60%로 선호하는 기술 중 하나이다. 본 논문에서는 Z-Wave 프로토콜을 이용한 온습도 센서 모듈을 구현하였다. 온습도 센서 모듈의 동작을 위하여 Z-Wave 프로토콜을 분석하고, 컨트롤러 모듈의 펌웨어를 탑재하여 구현하였고, 센서 모듈은 데이터 시트를 참고하여 설계 및 제작하였다. 또한 센서의 온습도 정보를 모니터링하는 프로그램을 개발하여 이를 확인하였으며, Z-Wave 모듈의 통달거리 시험, 수신데이터 성공률, 저전력 시험 등을 통하여 성능을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.48-50
• /
• 2009

This paper presents an IAQ(Indoor Air Quality) Monitoring System using equipments for measurement of fine Particle($PM1{\sim}PM10$), $CO_2$, VOCs(Volatile Organic Compounds), temperature and humidity for IAQ monitoring of subway station which millions of people use a day. The necessity of IAQ monitoring system is getting increased for more effective subway station monitoring in line with the recent government's regulation for IAQ is reinforcing. Subway Station is an unusual case. The structure of subway station is closed and complicated. Therefore when data of equipments are transferred, transmission error can happen occasionally. To prevent transmission error, an IAQ Monitoring System is needed the appropriate position and selection of equipments or sensor module. In addition IT(Information Technology) can be utilized like "WiBro(Wireless Broadband)" and "GateWay" for facilitate movement of data and construction of IAQ monitoring system of subway station.

• 한국대기환경학회지
• /
• 제23권6호
• /
• pp.689-698
• /
• 2007

Particular attention is paid to the validity of PM-10 measurement using beta attenuation method. In this study, the inter-comparison studies were undertaken for PM-10 sampler with different measuring methods. The three beta attenuation monitoring instruments (BAM1020, FH C-14, and DIGS-150) and filter based gravitational method using High Volume Air Sampler were collocated and mass concentrations were compared from August to November, 2006. The results of the investigation show that beta attenuation monitoring instruments are comparable with gravitational method within 10% of measurement error. For specific conditions under high humidity and high concentrations, the inter-comparison results also showed a relatively good agreement and this can be explained as the effect of inlet heating of beta attenuation instrument. Subsequently, this study shows that beta attenuation monitoring instruments can be equivalently used with reasonable validity when compared gravimetric method.

• 한국IT서비스학회지
• /
• 제8권4호
• /
• pp.215-223
• /
• 2009

The workplace environment monitoring system based on IP-USN proposed in this study measures and analyzes workplace environment information so as to provide services to provide better work environment and prevent occupational accidents caused by poor, shabby labor environment. This study presents the procedures to design and develop a system that monitors noise, humidity, vibration, temperature, and sensors installed in the workplace and sounds alarm when workers enter dangerous areas or are exposed to hazards. The author actually installed the IP-USN workplace environment monitoring system in a small workplace and confirmed its effectiveness.

• 대한임베디드공학회논문지
• /
• 제5권2호
• /
• pp.46-56
• /
• 2010

This study proposes a monitoring system by cooperating the image information and the sensor information in a sensor network system. The monitoring system proposed in this study is divided into internal spaces, such as offices and laboratories, and external spaces including other various spaces. In the internal spaces, motions in objects are detected through cameras while some peripherals like lights are controlled by analyzing some temperature, humidity, and illuminance data detected by sensor nodes. In the external spaces, it is to watch certain intruders to the internal spaces through the interested region for exceptional time by installing cameras, motion detectors, and body detectors in such interested regions. In the results of the test that was applied to a practically limited environment by implementing some interfaces for the proposed system, it was considered that it is possible to watch surroundings effectively using the image information obtained from cameras and sensor information acquisited from sensor nodes.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.946-949
• /
• 2007

무선 센서네트워크는 온도나 소리, 진동, 압력, 움직임 등의 환경 조건을 감시할 수 있는 장치가 다른 위치에 분산되어 있는 무선 네트워크이다. 환경 모니터링은 센서 네트워크의 응용분야로 과학적으로 많은 이점을 가지고 있다. 본 논문에서는 온도, 습도, 조도 센서의 모니터링에 사용되는 센서 네트워크 시스템을 설계 ${\cdot}$ 구현한다.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1505-1515
• /
• 2016

The age of autonomous vehicles has come according to development of high performance sensing and artificial intelligence technologies. And importance of the vehicle's surrounding environment sensing and observation is increasing accordingly because of its stability and control efficiency. In this paper we propose an integrated platform for efficient networking, analysis and monitoring of multiple sensing data on the vehicle that are equiped with various automotive sensors such as GPS, weather radar, automotive radar, temperature and humidity sensors. From simulation results, we could see that the proposed platform could perform realtime analysis and monitoring of various sensing data that were observed from the vehicle sensors. And we expect that our system can support drivers or autonomous vehicles to recognize optimally various sudden or danger driving environments on the road.