• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• 해양환경안전학회지
• /
• 제24권5호
• /
• pp.619-627
• /
• 2018

선박의 고속, 대형화 및 규제강화의 추세에 따라 유동소음의 중요성이 강조되고 있다. 그러나 항공, 철도 등의 공력소음 분야에서 유동소음을 설계에 반영하고 있는 것에 반해 조선해양분야에서는 고려되지 않고 있다. 본 연구에서는, 선체유기 유동소음의 해석절차를 정립하고 쇄파의 영향이 작고 선체선형에 의한 유기소음의 특성이 뚜렷한 파랑관통형 선형에 대해 소음특성을 분석하였다. 선체유기 유동소음의 주요 메커니즘인 난류경계층 내부의 복잡한 난류유동과 구조물의 유체-구조 연성적 소음원은 벽면변동압력을 이용하여 가진력을 모델링하고 파워흐름해석법을 이용하여 진동음향 응답해석을 수행하였다. 주파수 영역 및 선체부위에 따라 상의한 소음특성을 가지며 저주파수 영역에서 선형의 영향이 상대적으로 크고 유속에 비례하는 경향을 확인할 수 있었다.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.29-40
• /
• 2006

The paper presents an optimization system which integrates a parametric design tool, 3D diffraction-radiation analysis and hydrodynamic performance assessment based on short and long term wave statistics. Controlled by formal optimization strategies the system is able to design offshore structure hulls with superior seakeeping qualities. The parametric modeling tool enables the designer to specify the geometric characteristics of the design from displacement over principal dimensions down to local shape properties. The computer generates the hull form and passes it on to the hydrodynamic analysis, which computes response amplitude operators (RAOs) for forces and motions. Combining the RAOs with short and long-term wave statistics provides a realistic assessment of the quality of the design. The optimization algorithm changes selected shape parameters in order to minimize forces and motions, thus increasing availability and safety of the system. Constraints ensure that only feasible designs with sufficient stability in operation and survival condition are generated. As an example the optimization study of a semisubmersible is discussed. It illustrates how offshore structures can be optimized for a specific target area of operation.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.9-17
• /
• 2006

Performing inspections for Hull Condition Monitoring and Assessment as stipulated in IACS unified requirements and IMO's Condition Assessment Scheme (CAS) IMO Resolution MEPC.94(46), 2001, Condition Assessment Scheme, IMO Resolution MEPC.111(50), 2003, Amendments to regulation 13G, addition of new regulation 13H involves a huge amount of measurement data to be collected, processed, analysed and maintained. Information to be recorded consists of thickness measurements and visual assessment of coating and cracks. The amount of data and increasing requirements with respect to condition assessment demand efficient computer support. Currently, due to the lack of standardization for this kind of data, the thickness measurements are recorded manually on ship drawings or tables. In this form, handling of the measurements is tedious and error-prone and assessment is difficult. Data reporting and analysis takes a long time, leading to some repairs being performed only at the next docking of the ship or making an additional docking necessary. The recently started ED funded project CAS addresses this topic and develops-as a first step-a data model for Hull Condition Monitoring and Assessment (HCMA) based on XML-technology. The model includes simple geometry representation to facilitate a graphically supported data collection as well as an easy visualisation of the measurement results. In order to ensure compatibility with the current way of working, the content of the data model is strictly confined to the requirements of the measurement process. Appropriate data interfaces to classification software will enable rapid assessment by the classification societies, thus improving the process in terms of time and cost savings. In particular, decision-making can be done while the ship is still in the dock for maintenance.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2005

연구는 선박 설계 초기단계에서 선형 변화에 따른 선박 조종성능 추정에 관한 내용을 다루었다. 선박제원을 대표하는 파라메터 그리고 선미형상의 변화를 민감하게 반영할 수 있는 새로운 파라메터를 선정하는 작업을 수행하였다. 이렇게 선정된 파라메터와 유체력 미계수와 상관관계를 알아보기 위하여 구속모형 실험을 수행하였다. 그 결과 기존의 기본적인 선박제원 중 상관도가 높은 파라메터를 가려낼 수 있었다. 또한 선미형상의 새로운 파라메터와 조종성능과의 상관도를 추정할 수 있었다. 이를 활용하면,초기 선형 설계시 선형변화 및 수정에 따른 조종성능 추정에 활용할 수 있을 것으로 판단된다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.90-94
• /
• 2011

Longitudinal shell member that arranged block unit on 3D-curved surface is performed manual working by designer considering spacing of division characteristic, location and twisting at geometrical 3-dimensional form. Shell expansion drawing that drawn by initial design and shell landing work performed by hull production design have overlap of design work in terms of arrangement of shell longitudinal member. In this study, eliminate design overlap on shell member arrangement that is one of ship longitudinal member. Develop shell member optimization and auto arrangement system.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.531-539
• /
• 2017

전통적인 FRP 선체 제작에는 mould가 요구되며, mould의 높은 제작비용은 FRP 선박 제작자에게 비용부담을 주고 있다. 이를 극복하기 위한 방안으로 강선 건조에서 사용되는 블록 혹은 모듈 방식의 제작기법에 착안한 modular construction 방안이 제시되었다. 이 제작방안을 FRP 선체에 효율적으로 적용하기 위해서는 설계 및 제작 측면에서 간략하면서도 구조적 안정성을 갖는 접합 이음부 개발이 이루어져야 한다. 따라서, 본 논문에서는 모듈방식의 FRP 선체 제작을 위해 moulding-in 개념을 기반으로 한 경제적인 접합 이음부 개발에 관한 연구를 수행하였다. FRP 샌드위치 판을 대상으로 step, scarf-step 그리고 scarf 이음부 형상을 갖는 moulded-in을 수지주입식진공성형 공정에 도입하여 성공적으로 접합된 FRP 샌드위치 판을 제작하였다. 이에 대해 구조적 안정성 평가를 목적으로 인장 및 4점 굽힘 시험 그리고 유한요소해석을 수행하였다. 시험과 해석결과에 대한 비교 연구를 통해 본 연구에서 개발된 접합 이음 내용이 모듈방식의 FRP 선체 제작에 적용 가능함을 확인할 수 있었다.

• 수산해양기술연구
• /
• 제51권1호
• /
• pp.9-15
• /
• 2015

A Korean-designed cruiser class sailing yacht, based on the form of traditional yachts, has been developed. In this paper, structural design procedures for the yacht are studied. The scantling of structural members and loads is carried out based on the guidelines suggested by Australian Standard 4132-1993, the American Bureau of Shipping (ABS) and the International Organization for Standardization (ISO). Patran/Nastran finite element analysis is performed on models of the trial sailing boat, and from these results, the structural strength of the ship's hull is verified.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.495-501
• /
• 2008

Samsung Heavy Industries (SHI) and NRC's Institute for Ocean Technology (IOT) collaborated on a project to predict the performance of a new design for a Suezmax size tanker that had acceptable open water performance but was also capable of operating in ice. The resulting hull form was a single screw, single rudder design with a bulbous bow, modified for operation in ice. An important design consideration is the ability of the ship to maneuver in different ice conditions. This paper presents the results of maneuvering experiments in pack ice and level ice, using a free running model.

• 대한조선학회논문집
• /
• 제41권3호
• /
• pp.13-21
• /
• 2004

This paper deals with a theoretical and experimental method for the design of a biased asymmetric pre-swirl stator propulsion system which is an energy saving device by recovering a propeller rotational energy. In the case of slow-speed ships, the upward flow is generated along the afterbody hull form at the propeller plane. The generated upward flow cancels the rotating flow of the propeller at the starboard part while it increases at port part. The present biased asymmetric pre-swirl stator propulsion system consists of three blades at the port and one blade at the starboard which can recover the biased rotating flow effectively. This paper provides the design concept which gives more simple and a high degree of efficiency and the experimental results for the compound propulsion system.