• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.348-348
• /
• 2014

차세대 디스플레이 구동 회로 소자를 위한 재료로서, Amorphous Oxide Semiconductor (AOS)가 주목받고 있다. AOS는 기존의 Amorphous Silicon과 비교하여 뛰어난 이동도를 가지고 있으며, 넓은 밴드 갭에 의한 투명한 광학적 특성을 가지고 있다. 이러한 장점을 이용하여, AOS 박막은 thin film transistor (TFT)의 active channel로 이용 되고 있다. 하지만, AOS를 이용한 TFT의 경우, 시간이 경과함에 따라 $O_2$ 및 $H_2O$ 흡착에 의해 전기적 특성이 변하는 현상이 있다. 이러한 현상은 소자의 신뢰성에 있어 중요한 문제가 된다. 이러한 문제를 연구하기 위해 본 논문에서는, AOS 박막을 이용하여 bottom 게이트형 TFT를 제작하였다. 이를 위해 먼저, p-type Si 위에 건식산화방식으로 $SiO_2$(100 nm)를 성장시켜 게이트 산화막으로 이용하였다. 그리고 Zn과 Sn이 1: 2의 조성비를 가진 ZnSnO (ZTO) 용액을 제조한 후, 게이트 산화막 위에 spin coating 하였다. Splin coating된 용액에 남아 있는 솔벤트를 제거하기 위해 10분 동안 $230^{\circ}C$로 열처리를 한 후, 포토리소그래피와 에칭 공정을 이용하여 ZTO active channel을 형성하였다. 그 후, 박막 내에 남아 있는 불순물을 제거하고 ZTO TFT의 전기적인 특성을 향상시키기 위하여, $600^{\circ}C$의 열처리를 30분 동안 진행 하여 junctionless형 TFT 제작을 완료 하였다. 제작된 소자의 시간 경과에 따른 열화를 확인하기 위하여, 대기 중에서 2시간마다 HP-4156B 장비를 이용하여 전기적인 특성을 확인 하였으며, 이러한 열화는 후처리 공정을 통하여 회복시킬 수 있었다. 열화의 회복을 위한 후처리 공정으로, 퍼니스를 이용한 고온에서의 열처리와 microwave를 이용하여 저온 처리를 이용하였다. 결과적으로, TFT는 소자가 제작된 이후, 시간에 경과함에 따라서 on/off ratio가 감소하여 열화되는 경향을 보여 주었다. 이러한 현상은, TFT 소자의 ZTO back-channel에 대기 중에 있는 $O_2$ 및 $H_2O$의 분자의 물리적인 흡착으로 인한 것으로 보인다. 그리고 추가적인 후처리 공정들에 통해서, 다시 on/off ratio가 회복 되는 현상을 확인 하였다. 이러한 추가적인 후처리 공정은, 열화된 소자에 퍼니스에 의한 고온에서의 장시간 열처리, microwave를 이용한 저온에서 장시간 열처리, 그리고 microwave를 이용한 저온에서의 단 시간 처리를 수행 하였으며, 모든 소자에서 성공적으로 열화 되었던 전기적 특성이 회복됨을 확인 할 수 있었다. 이러한 결과는, 저온임에도 불구하고, microwave를 이용함으로 인하여, 물리적으로 흡착된 $O_2$ 및 $H_2O$가 짧은 시간 안에 ZTO TFT의 back-channel로부터 탈착이 가능함과 동시에 소자의 특성을 회복 가능 함 의미한다.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.185-191
• /
• 2014

The width of depletion region in a varactor diode can be modulated by varying a reverse bias voltage. Thus, the preferred characteristics of depletion capacitance can obtained by the change in the width of depletion region so that it can select only the desirable frequencies. In this paper, the TV tuner varactor diode fabricated by hyper-abrupt profile control technique is presented. This diode can be operated within 3.3 V of driving voltage with capability of UHF band tuning. To form the hyperabrupt profile, firstly, p+ high concentration shallow junction with $0.2{\mu}m$ of junction depth and $1E+20ions/cm^3$ of surface concentration was formed using $BF_2$ implantation source. Simulation results optimized important factors such as epitaxial thickness and dose quality, diffusion time of n+ layer. To form steep hyper-abrupt profile, Formed n+ profile implanted the $PH_3$ source at Si(100) n-type epitaxial layer that has resistivity of $1.4{\Omega}cm$ and thickness of $2.4{\mu}m$ using p+ high concentration Shallow junction. Aluminum containing to 1% of Si was used as a electrode metal. Area of electrode was $30,200{\mu}m^2$. The C-V and Q-V electric characteristics were investigated by using impedance Analyzer (HP4291B). By controlling of concentration profile by n+ dosage at p+ high concentration shallow junction, the device with maximum $L_F$ at -1.5 V and 21.5~3.47 pF at 0.3~3.3 V was fabricated. We got the appropriate device in driving voltage 3.3 V having hyper-abrupt junction that profile order (m factor) is about -3/2. The deviation of capacitance by hyper-abrupt junction with C0.3 V of initial capacitance is due to the deviation of thermal process, ion implantation and diffusion. The deviation of initial capacitance at 0.3 V can be reduced by control of thermal process tolerance using RTP on wafer.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1391-1401
• /
• 2019

The KOMPSAT-3A is a high-resolution optical satellite launched in 2015 by Korea Aerospace Research Institute (KARI). KOMPSAT-3A provides Panchromatic (PAN-0.55 m), Multispectral (MS-2.2 m), and Mid-wavelength infrared (MIR_OR-5.5 m) image. However, due to security or military problems, MIR_OR image with 5.5m spatial resolution are provided down sampled at 33 m spatial resolution (MIR_rd). In this study, we propose spatial sharpening method to improve the spatial resolution of MIR_rd image (33 m) using virtual High Frequency (HF) image and optimal fusion factor. Using MS image and MIR_rd image, we generated virtual high resolution (5.5 m) MIR_OR^fus image and then compared them to actual high-resolution MIR_OR image. The test results show that the proposed method merges the spatial resolution of MS image and the spectral information of MIR_rd image efficiently.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.277-285
• /
• 2016

Objectives: This study was performed in order to evaluate whether 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) could be detected among residents living near Camp Caroll in Waegwan and whether serum concentrations of dioxins, including 2,3,7,8-TCDD, and organochlorine pesticides (OCPs) are associated with length of residence. Methods: Study subjects totaled 113 (for dioxins) and 190 (for OCPs) adults who were selected from participants in a medical investigation. Serum concentrations of dioxins and OCPs were measured using HRGC/HRMS. Information on length of residence was obtained through questionnaires. Results: 2,3,7,8-TCDD was not detected in serum among all subjects. When length of residence was classified as a categorical variable, after adjusting for confounding variables, only residents living in Waegwan for 40 years or longer tended to have high total TEQ values and 2,3,4,7,8-PeCDF with marginal significances. There was no dose-response relation between length of residence and serum concentrations of these chemicals. In multiple regression models with continuous values of the length of residence, total TEQ value and 1,2,3,4,6,7,8-HpCDF were positively associated with length of residence. However, they explained about 3-5% of total variations of serum concentrations of these compounds, while age, consumption of fatty fish, body mass index, alcohol drinking, and cigarette smoking were main variables affecting serum concentrations of dioxins or OCPs. Conclusions: In the current study, high concentrations of certain compounds were mainly observed among persons who lived in Waegwan for at least for 40 years without a dose-response relation. Therefore, it seems difficult to conclude that length of residence meaningfully contributed to the current serum concentrations of dioxins or OCPs among residents in Waegwan. However, considering the half-life of 2,3,7,8-TCDD and indirect exposure routes, the limitations of the current study design should be considered in the interpretation of the study findings.

• Journal of Applied Biological Chemistry
• /
• v.62 no.4
• /
• pp.375-384
• /
• 2019

The root of Panax ginseng C.A. Meyer were extracted with 70% aqueous EtOH and the concentrates were partitioned into MeOH and H₂O fractions using Diaion HP-20. The repeated SiO₂ or octadecyl SiO₂ column, and MPLC for the MeOH fraction led to isolation of four malonyl ginsenosides. The chemical structures of these compounds were determined as malonyl ginsenoside Rd (1) malonyl ginsenoside Rc (2) malonyl ginsenoside Rb2 (3) malonyl ginsenoside Rb1 (4) based on spectroscopic analyses including Nuclear magnetic resonance and HR-TOF/MS. The contents of malonyl ginsenoside Rb1 was highist as 5.44 mg/g of five years of ginseng. And malonyl ginsenoside Rd was lowest as 0.11 mg/g of six years of ginseng. Additionally, the malonyl ginsenoside Rd exhibited hepatoprotective effect against ethanol-induced hepatotoxicity in HepG2 cell line.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.268-273
• /
• 2016

Background: This study was a long-term evaluation of $^{137}Cs$ and $^{90}Sr$ activity concentrations in seawater samples from the East Sea, Korea, in order to establish current activity levels. Results and long-term monitoring trends will be useful in the future monitoring of environmental radioactivity. Materials and Methods: Surface seawater samples were collected quarterly from Guryongpo and Jangho in the East Coast between 1998 and 2010 and the quarterly deep seawater samples were collected from three sites in the sea adjacent to Ulleung-do between 2012 and 2015. The activity concentrations of $^{137}Cs$ were measured using a gamma-spectrometer. The activity concentrations of $^{90}Sr$ and $^{90}Y$ in a radioactive equilibrium state were measured using a gas flow proportional counter. Results and Discussion: We found the annual average activity concentrations of $^{137}Cs$ in the surface seawater was $1.66-2.89mBq{\cdot}kg^{-1}$ in Guryongpo and $1.68-2.43mBq{\cdot}kg^{-1}$ in Jangho. The annual average activity concentrations of $^{90}Sr$ in the surface seawater was $0.83-1.98mBq{\cdot}kg^{-1}$ in Guryongpo and $0.82-1.57mBq{\cdot}kg^{-1}$ in Jangho. The annual average activity concentrations of $^{137}Cs$ in the deep seawater sites were $1.51-1.73mBq{\cdot}kg^{-1}$, $1.19-1.60mBq{\cdot}kg^{-1}$ and $0.87-1.15mBq{\cdot}kg^{-1}$ in TH, JD, and HP. The annual average activity concentrations of $^{90}Sr$ in the same deep seawater sites were $1.00-1.94mBq{\cdot}kg^{-1}$, $0.82-1.26mBq{\cdot}kg^{-1}$, and $0.79-1.32mBq{\cdot}kg^{-1}$. The effective half-life was calculated by analyzing change over time in the activity concentration in the surface seawater. The effective half-life of $^{137}Cs$ was $15.3{\pm}0.1years$ in Guryongpo and $102{\pm}3years$ in Jangho. The effective half-life of $^{90}Sr$ was $28.3{\pm}4.3years$ in Guryongpo and $16.6{\pm}0.1years$ in Jangho. The ratio of the average activity concentration ($^{137}Cs/^{90}Sr$) was 1.72 in the surface seawater, which is similar to the reported ratio of the global radioactive fallout. The ratio in the deep seawater was 1.24, which is somewhat low compared to the global ratio (1.6, 1.8). Conclusion: Activity concentrations of $^{137}Cs$ and $^{90}Sr$ in the seawaters of the East Sea were similar to the previously reported activity levels in the East Sea and northwestern Pacific as a result of global radioactive fallout following atmospheric nuclear weapon tests.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Communications of Mathematical Education
• /
• v.22 no.4
• /
• pp.533-543
• /
• 2008

Recently, many advanced countries have used original ICT tools in their educational courses. But Korea didn't have any effective origin ICT tools in our mathematical education, compared with other countries which have developed various tools, for examples, Web-Mathematica and HP Calculator. Although we have the advanced IT environment, the educational environments in mathematics using ICT seems to be not promising. In this paper, we suggest a new mathematics education tools in ICT and the internet environments in Korea, and a teaching and studyingmodel for the teachers, students and classrooms. It is based on the Sage-Math and RPG. Sage-Math which is the software based on the web and RPG(Random Problem Generator) will give a good answer for the future of Korean mathematics ICT education.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.301-322
• /
• 2013

Recent major post-hurricane damage assessments in the United States have reported that the most common damages result from the loss of building roof coverings and subsequent wind driven rain intrusion. In an effort to look further into this problem, this paper presents a full-scale (Wall of Wind --WoW--) investigation of external and underneath wind pressures on roof tiles installed on a low-rise building model with various gable roofs. The optimal dimensions for the low-rise building that was tested with the WOW are 2.74 m (9 ft) long, 2.13 m (7 ft) wide, and 2.13 m (7 ft) high. The building is tested with interchangeable gable roofs at three different slopes (2:12; 5:12 and 7:12). The field tiles of these gable roofs are considered with three different tile profiles namely high (HP), medium (MP), and low profiles (LP) in accordance with Florida practice. For the ridge, two different types namely rounded and three-sided tiles were considered. The effect of weather block on the "underneath" pressure that develops between the tiles and the roof deck was also examined. These tests revealed the following: high pressure coefficients for the ridge tile compared to the field tiles, including those located at the corners; considerably higher pressure on the gable end ridge tiles compared to ridge tiles at the middle of the ridge line; and marginally higher pressure on barrel type tiles compared to the three-sided ridge tiles. The weather blocking of clay tiles, while useful in preventing water intrusion, it doesn't have significant effect on the wind loads of the field tiles. The case with weather blocking produces positive mean underneath pressure on the field tiles on the windward side thus reducing the net pressures on the windward surface of the roof. On the leeward side, reductions in net pressure to a non-significant level were observed due to the opposite direction of the internal and external pressures. The effect of the weather blocking on the external pressure on the ridge tile was negligible.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.373-381
• /
• 2017

The main objective of this study was to increase the germination percentage of kenaf seeds with less number of times under non-saline and saline conditions. Therefore, the first goal was to assess the response of kenaf seeds to NaCl. The second goal was to evaluate the effects of $KNO_3$ on kenaf seed germination. The germination percentage exhibited a decreasing tendency in germination rate. Plant dry weight was approximately 0.2 g in all treatments at 5 days after germination. As time passed, the electrical conductivity (EC) value of hydro-priming (HP) consistently increased by 8.7 mS/cm at 24 hours of immersion. However, seeds primed with $KNO_3$ showed no difference in EC values even as times passed. Regarding the priming effect, priming in 100 mM $KNO_3$ concentration for 12 hours increased germination up to 85% in $H_20$ solution and in 0 mM $KNO_3$ concentration upto 73.8% under 0.3% NaCl solution, compared to that of Control. Germination synchronization, shoot length, and leaf unfolding of primed seeds were greater than those of the Control. In addition, main root and hair roots appeared more rapidly in the treated seeds and were more abundant compared to that of the Control. The T50 (times to reach 50% of the final germination percentage) of the Control in both $H_20$ and 0.3% NaCl solutions was 18 and 22 hours, respectively. However, when treated $KNO_3$ priming (0 to 100 mM) in $H_20$ and 0.3% NaCl solution, 9 hours was sufficient to reach T50. Primed (hydro-priming and $KNO_3$) seeds had a lower MDG (mean days untill germination; 0.6-0.62) compared to that of the Control (1.13-1.31) in $H_20$ and 0.3% NaCl solutions. Regarding dry weight of plants after priming, an increasing tendency after the priming treatment in the H20 solution was observed. Furthermore, no significant difference in plant dry weight under 0.3% NaCl stress was observed between the Control and primed seeds. Taken together, the results suggest that 50-100 mM $KNO_3$ priming for 24 hours optimize seed germination rate in less number of times of exposure with great vigor. Therefore, it is recommended for kenaf seed invigoration before planting.