• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.203-214
• /
• 2012

The physical environment of urban areas covered mostly by concrete and asphalt is the main cause of the urban heat island effect, primarily becoming apparent through increased land surface temperature. This study examined the effect of different urban land cover types on the land surface temperature using MODIS, Landsat ETM+ and RapidEye satellite data. As a result, the remote sensing based land surface temperature showed a marked difference according to the land use pattern in the case study of Ilsan new city. The high-rise apartment residential districts with less building-to-land ratio and higher green area ratio revealed lower land surface temperature than the low-story single-family housing districts characterized by relatively high building-to-land ratio and low green area ratio. From the view of climate zone and land cover types, there is a strong linear correlation between the impervious land cover ratio and the land surface temperature; the land surface temperature increases as the impervious built-up areas expand. In contrast, vegetation;water and shadow areas affect the decrease of land surface temperature. There is also a negative (-) correlation between NDVI and land surface temperature but the seasonal variation of NDVI can be hardly corrected.

• KIEAE Journal
• /
• v.5 no.3
• /
• pp.41-48
• /
• 2005

Before occupation of an apartment housing, the builders are required to inform the test result of IAQ to the public. However, there is no simplified method to predict IAQ before measurement of pollutant concentration. In this study, a simplified way of predicting IAQ based on the distribution of indoor pollutant concentration is proposed. 7 different cases of air change rate have been simulated through CFD analysis to get the distribution ratio of each pollutant material and then simplified functions were used with CRIAQ1 values derived from CFD simulation to evaluate by comparing the influence of each material in the indoor pollutant concentration. Again, a lot of efforts which can improve the indoor air quality have been performed. Materials used in indoor space are labeled with their pollutant emission level. Installation of ventilation system in residential buildings will be regulated by a building codes sooner or later. But it is important to understand the fact that layout of walls, location or size of openings will influence the indoor air flow and pollutant concentration. And location of emitting material influences to indoor air pollutants distribution. But until now there is few recognition and consideration of these factors. Therefore, in this paper the effects of these factors is proved and some kind of guideline is made for designers after a comparison of typical apartment floor plan and a new type plan with their average pollutant concentration and its distribution of each room. CFD(Computational Fluid Dynamics) program was used to show the indoor air flow and pollutant concentration distribution. For this purpose, a typical $100m^2$ apartment floor plan was chosen as a case study model and several alternatives were reviewed to improve the IAQ performance. The simulation took place in the condition of natural ventilation through windows.

• Journal of the Korean association of regional geographers
• /
• v.14 no.5
• /
• pp.466-479
• /
• 2008

This study focuses on the characteristic of community making in urban areas and the implications in the case of Samduck-Dong, Daegu City. This study observed the geographic feature of Samduck-Dong, the background and process of community making and the citizen's interests and respondence. Samduck-Dong is located near CBD of Daegu and surrounded by useful places and facilities. This area is perceived as an attractive housing environment. As the commercial function is increased and the studio type house for rent, so called one room, is constructed, it is anticipated to get some trouble of building up community. The program of community making in Samduck-Dong, started from wall removal, is attempted diversly now. The places in relation to community making became a representative character of Samduck-Dong. However, there is problems of citizen's participation and the appreciation sharing about the contents and scale of community making.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.88-90
• /
• 1996

The right and left atrial pressures are important parameters in automatic control of a total artificial heart (TAH) within normal physiological ranges. Our TAH is composed of a moving actuator, right and left ventricles and the interventricular space enclosed by a semi-rigid housing. During operation of the TAH, the jnterventpicular space's volume is changed dynamically by the difference between the ejection volume of one ventricle and the inflow volume of the other. Therefore, the changes in pressure of the interventricular space is related to both atrial pressures. We measured the interventricular pressure (IVP) waveform using a pressure sensor and attempted to indirectly estimate the changes of atrial pressures. This method has an advantage that the sensor does not contact the blood directly. Furthermore, the IVP waveforms have its zero baseline in each pump cycle, thus the pressure measurements are free from the transducer drift problems by measuring the peak pressure from these baseline values. From the In vitro experiments, we found that the IVP waveform contained several useful parameters such as negative peak, dP/dT on the initial break, the area enclosed by the profile in each stroke, which are associated with atrial pressures and the filling conditions of the ventricles. The measured atrial pressures were linearly related to the negative peak of the interventricular pressure.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.184-193
• /
• 2009

In recent years, the architectural interest in the apartment design has been getting focused on qualitative improvement and design differentiation. Especially the facade design differentiation is one of the most important elements in this matter. The purpose of this study is to provide the basic informations that can be referenced when architects are dealing with exterior design by analyzed design types and characteristics of apartment entrances. Target apartment of this study was whasung dongtan the 2nd phase new city districts which was planned to solve a housing shortage in the capital region. Having examined eleven pilot districts, four 1st construction areas, and eight 2nd construction areas, - total 23 complexes - 282 apartment entrances in 212 apartment buildings were carefully researched. Apartment entrance design can be divided into 15 different design elements: design types and combination types, direction, shape, height, approach types, exterior wall finishes of entrance, exterior wall finishes of lower parts of apartment, handrail types of slope, floor finishes of slope, distribution ratio of piloti, ceiling height of piloti, floor finishes of piloti, space use of piloti, window establishment between piloti and elevator hall, landscape elements of piloti. Design characteristics of building entrances were also analyzed in 4 groups (I, II, III, IV) divided by construction contractors ranking. In conclusion, first, design types and combination types can be classified into 15 different kinds, and the group I and II tend to show wider variety of entrance combinations. Secondly, the height and volume of extrude entrance type tend to increase in the group I and II. Third, the spatial configuration of pilotis appears to show more of 'pass + store + break' rather than 'access', as we get closer to the group I.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.331-335
• /
• 2020

In this study, through the accumulated technologies such as real-time monitoring of power consumption using power line communication (PLC) method, power control, and automatic blocking of standby power, to commercialize them, we developed the hardware design, algorithm, protocol and module along with data transmission using PLC. We conducted the study to develop advanced products. We also proposed cloud-based smart outlet products with a novel type of outlet. These products can measure the internal power consumption through the H/W modules and the modules that control the power of household appliances connected to the smart outlets and smart plugs. Subsequently, they transmit the measurements to the energy saving system server via a communication module. This system can control the terminal device connected to the Gateway (G/W) server through a mobile phone. This will allow the customer to check the power consumption of the building at any given time, to turn the terminal on/off, and to maximize the energy efficiency during the construction of new apartments or multi-family housing in an area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.5
• /
• pp.355-363
• /
• 2007

The Korean traditional 'Ondol' system has been a target for innovation to meet the requirements of sustainable domestic building and low carbon emission energy utilization. Simulation techniques provide designers and researchers with powerful tools to predict heating load and thermal behaviour of Ondol systems installed in various contexts. However, there are few studies on Ondol models, especially associated with multi-stories buildings of which type covers about 50% of Korean housing stock. In this study, we analyzed the double floor Ondol system on the multi-stories buildings using the ESP-r program. On the basis of the double floor Ondol system, we suggested the new modelling method that is composed of the Vent zone and Ondol zone. Using the this model, sensitivity analysis was carried out to refine the applicability of the model taking account of control conditions, constructions, air change and air flow network method and CFD analysis using the FLUENT. The air layer has enough temperature to use in heating zone. It is suggested that the simplicity of the model will allow building designers and mechanical engineers easily to implement scenario-based assessments of design options as well as control strategies. Later, we will simulate the real buildings and analyze the air distributions using the Fluent according to the various conditions.

• The Journal of Korean Society for School & Community Health Education
• /
• v.21 no.1
• /
• pp.15-31
• /
• 2020

Background and objectives: One-person households are the fastest growing family type in Korea. They bring social concerns such as weakened social integration, increasing poverty and social isolation. They are not homogeneous but heterogeneous groups depending on their socio-demographic characteristics including generation. This study compared the life satisfaction level as well as factors affecting it among the three one-person household generations Methods: The 13th wave of the Korea Welfare Panel dataset with 1,187 respondents was utilized. For data analysis Chi-square test, analysis of variance and hierarchical regression analysis were employed. Generations are divided into three, namely young adult (20-39), the middle-aged (40-64) and the elderly (65 and over). Result: The life satisfaction level was highest among the young adult one-person household generation, followed by the middle-aged and the elderly generation. The common factors affecting life satisfaction of the three generations were physical as well as mental health, including self-esteem and depression. However, there were more factors different from generation to generation. As for the young adult, age, religion, and smoking were significant. As for the middle aged and the elderly, gender (male) and income were significant. Additionally, age, home-ownership and drinking were significant to the elderly generation. Conclusions: As there are differences as well as similarities among the three generations, policies for one-person households need to be devised considering these findings. For all generations, both physical and mental health policies are needed. For young adult strengthening social relations, providing decent jobs, and promoting anti-smoking policy are major agenda, and for the middle-aged and the elderly, assisting in social capital accumulation (for male), providing stable jobs and diverse leisure activities, and securing income. Additionally, for the elderly, expanding the social security system and housing support are needed.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.326-335
• /
• 2019

This study categorized 100 female subjects over 65 years of age into two groups. The first group is called 'early stage of varus', which is when the gap between the knees is less than 5 cm. The second group is called 'progressive varus', which is when the gap between knees is 5 cm (or more). We then analyzed their lower body shapes and life status. The results were as follows. The average gap between knees in the early stage group and the progressive group was 3.3 cm and 6.2 cm. Direct and indirect measurements of their lower bodies showed that subjects in the progressive group had longer legs than the other group because their legs were bent outwards. Most of the subjects were found to live in western housing conditions, but maintained sedentary lifestyles. A total of 60% of the subjects thought that they were in bad health conditions and said that they found it difficult to move their knees dynamically; in addition, 63.6% of the subjects in the early stage group and 73.5% of the subjects in the progressive group suffered from arthritis. Subjects in the progressive group were more aware than the other group that their legs were bent outwards. They also responded that bent legs do harm to their appearance and make their lives uncomfortable. Most senior females with varus did not seek medical treatment and did not buy clothes that can help change their varus. However, 95% of the subjects responded they were in need for clothes that could straighten the varus-type.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.193-201
• /
• 2019

The public's interest regarding multi-household houses, one of the small-scale housings used as profit earning property, has been increasing. Previous studies regarding price, such as the rent and sales price of multi-household houses', however, were difficult to find. Thus, this study set forth to find out what characteristics influence the sales price of multi-household houses so as to provide further suggestions to investors' decision makings and developers' strategy establishments. The data was retrieved from multi-household sales transacted in Changwon City. Through empirical analysis, this paper found that prices were high in Euichang-gu and Seongsan-gu, and meaningful variables in terms of locations were distance from major trade areas(-), distance from main streets(-), and Corner site(+). Meaningful variables related to household characteristics were total floor area(+), Studio type(+), Southern exposure(+), Building age(-), and Full-furnished(+).