• Journal of Animal Environmental Science
• /
• v.20 no.4
• /
• pp.155-160
• /
• 2014

This study was researched for use by data for the improvement of ventilation system of optimum environmental control systems. The ventilation system for windowless swine housing was installed negative pressure system that circular pipe duct for inlet was installed on the ceiling and axial flow fan for exhaust was installed on the sidewall. The temperatures in the pen was measured using infrared thermography camera and thermocouple with data-logger. The temperature measurement points was selected by infrared thermography camera is alley (G), inlet (A), front-upper (B), front-lower (C), rear-upper (D), rear-lower (E), forward fan (F). The temperature measured at those selected points for temperature distribution was $28^{\circ}C$ that was maintained setting temperature in suitably. The temperature deviations of F point and A~E points in windowless swine housing was less then average $0.5^{\circ}C$. The result of air velocity of measured points was suitable to the breeding of pigs.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.393-398
• /
• 2008

The environment is the important resource to use as well as to conserve for the development. Since 1990s, it has accentuated the importance of the environment and tried to conserve the environment in many areas. Among many area, the building industry has played a role to destruct the environment for providing the living decent space and brought the environmental affect. Therefore, the building industry should endeavor to mitigate the environmental affect. In building life cycle, it consumes the energy and natural resources. But it is difficult to evaluate the environmental affect during the whole building life. It is impossible to calculate the environmental affect without the much time and effort. Therefore. it requires the easy and handing program to calculate the affect to environment in each building life cycle. Until now, many program for assessing the affect to the environment have been developed and limitedly used because of the assessment scope and contents. In this paper, it aimed at developing the assessment program of LCA, focused on the energy consumption and carbon-dioxide emission compared with the domestic and foreign concerned programs. The developed program is divided into 3 areas; construction, maintenance, demolition.

• Journal of the Korean housing association
• /
• v.5 no.2
• /
• pp.119-127
• /
• 1994

This study has tried to grasp the awareness of employees in current apparel industry and common consumers about the show window in apparel shops. Interestingly, the employees were more concerned about the necessity of display and lighting than the consumers. However, the current display and lighting systems did not satisfy the consumers' requirements. Although they did not recognize that lighting display was closely related with display, color, and so on, they thought lighting indispensable. In consequnce, they light source and lighting method have to be carefully chosen, and the relationship between color and lighting should be fully considered as well.

• Journal of the Korean housing association
• /
• v.21 no.6
• /
• pp.53-60
• /
• 2010

Built-in wardrobe is constructing after ordering and making, because built-in wardrobe's size is fixed as housing measurement. It is hard to speak built-in wardrobe components of construction in these ways, and application of an MC (Modular Coordination) design system is meaningless too. And above all, measurement before construction isn't to expect standardization, and to increase custom-made furniture. So I suggest the standardization of built-in wardrobe utilizing standard last finish and reference plane in order to prevent an evil influence of built-in wardrobe's construction. And we utilized a reference plane, and we present construction document and design plan in order to solve these problems. The first stage, we investigate manufacture of a preferential domestic system kitchen and construction state, and we derive from a problem in viewpoints of standardization for this. And we analyze an effect got by application of the assembly basis aspect that we presented, and we can raise efficiency of standardization of housing and construction industry, and we light ultimately up. I will apply a standardization plan as above, and define that this assures a standardization of components and an economic effect.

• KIEAE Journal
• /
• v.16 no.6
• /
• pp.115-122
• /
• 2016

Purpose: The study is to measure indoor air pollutants concentration of existing housing and to analyze the causes and assess in accordance with the government's criteria. The research result could be used as data for public health through indoor air quality management of existing housing and more as a reference for new housing. Method: It was investigated 24 middle class housings of metropolitan area in summer which have been built for the past 30 years. Concentration of HCHO, TVOC was investigated in living room at morning and night and concentration of $CO_2$ was investigated in living room and master bedroom at morning and night. SKT100-X5 was used for concentration of HCHO, TVOC and ZGm053UK for concentration of $CO_2$. Result: Average concentration of TVOC was 1.31 times more than that of HCHO and standard deviation of that was 1.73 times higher. Average concentration of $CO_2$ was almost nearly close to 1,000ppm being criteria of the Ministry of Environment.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.4
• /
• pp.26-34
• /
• 2013

Customer satisfaction and customer relationship are crucial aspect in any enterprises including housing construction projects. In general, the housing developers are facing a number of new challenges in different countries including Libya. The construction industries/housing developers need to continuously improve their products and services to meet customers' satisfaction desires and to remain in the current competitive market. This paper focuses on analysing the satisfaction factors of customers including qualityaspects of products and services in the construction projects. A framework was developed to evaluate the dynamics relationship between customer satisfaction and quality products or services, aiming to help companies' managers and policy makers to understand the needs and points of view of their customers. Apragmatic analysis was conducted to explore and analyse the customer satisfaction factors in construction industry considering different aspect of customer groups in Libya. Results indicate that there is a high demand of improvements in the contractor's performance in terms of cost, time and quality of products. It was also found that Libyan construction companies have been forced to transform their policies after on Libyan war 2011 to focus on client and customer satisfactory policies, or say centric for the purpose of improving client requirements and turn the business into more advantageous for any company.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.943-946
• /
• 2007

Recently, lots of research are going on relation to Improving the Flexibility through all of construction I industry in that space, materials, structure, construction method, etc. The style , space and pattern of housing have been changing by reason that satisfying change of residential environment at the needs of the times, transformation of future-oriented construction trend and recognition of demand-oriented. Therefore, this study should suggest alternations through comparing and analyzing to construction factor of improving the Flexibility, and then should show direction and guideline for realizing actual a long life housing at the next generation through applicable and various classification examples in apartment housing.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2018

The purpose of this study is to develop a high-strength, high-toughness, thin-walled aluminum shock absorber housing product by applying a high vacuum die casting method to improve internal gas defect and formability. The analysis program dedicated for the casting was used because it was too costly and time-consuming to adopt the gating system design. The final casting plan was designed based on the flow pattern of the material filled into the mold and the result of air pressure and air pocket after the material was completely filled in the mold. Gaty shape was designed as a split type. The runner was designed to have the same shape as the initial inlet curve of the cavity, and the flow of the molten metal was prevented from turbulent flow. The most favorable results were obtained when the injection speed was $V_2=4.0m/s$. Defects on pores were reduced by applying high vacuum level inside the mold.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.27-46
• /
• 2007

Korean homenetwork industry is now faced with problems like low profitability and unclear commercialilzation. In particular, low awareness of homenetwork usefulness is one of the main reasons why homenetwork industry is not developed. Therefore, this study tried to find what kinds of characteristics of homenetwork affected the value of apartment and how. we conducted a survey of residents of apartment with homenetwork installed in it. Surveyed data was analyzed based on the model of extended Technology Acceptance Model(TAM) including perceived enjoyment and perceived trust as new factors. The research result showed that all factors involved in suggested model had positive effects on the behavioral intention of using homenetwork and the value of apartment. Most importantly, homenetwork user's behavioral intention increased perceived housing value of the apartment. The research result can be used in explaining the advantage of homenetwork to the residence of apartment as well as in designing the homenwtwork install of apartment.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.403-414
• /
• 2024

The aim of this study is to evaluate the productivity of multilayered modular housing units during the prefabrication phase. Additionally, it shows the results of productivity analysis conducted using the Web Cyclone technique. Initially, an review of literature and prior studies helped outline the comprehensive manufacturing process of laminated modular apartments, examining the range of minimum, average, and maximum work durations along with workforce size. Subsequently, the productivity of the multilayered apartments' prefabrication was assessed using the Web Cyclone technique, focusing on the workflow, duration, and personnel involved. This analysis also included a comparison of productivity against the initial plan based on the outcomes of a sensitivity analysis.