• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1317-1325
• /
• 2013

Paulownia coreana is a medicinal, edible and industrial plant with the largest leaf, and is native to Korea. We evaluated the reducing power activities, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activities (RSAs), nitrite scavenging activities (NSAs) and 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) cation RSAs by solvent extraction of P. coreana bark by using $50^{\circ}C$ hot water and $25^{\circ}C$ methanol. The antioxidative effect of P. coreana bark extract on corn seed oil was evaluated using the Rancimat test. The extraction yields on dry weight basis with 15 folds of hot water and methanol were 23.88% and 5.30%, respectively; further the flavonoid content in the hot water extract was over 2.5 times more than that in the methanol extract. The DPPH RSA of the methanol extract was substantially higher than that of the water extract, whereas the NSA of the water extract was higher than that of the methanol extract at pH 1.2. The ABTS RSAs of the two extracts were almost the same as that of ascorbic acid and 2,6-ditertiarybutyl hydroxytoluene. The two extracts of P. coreana bark in this study were found to slightly improve the oxidation stability of corn seed oil.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.299-303
• /
• 2014

This study was to comparative analysis that different methods of extraction about total sugar content which the major functional components of edible and medicinal mushrooms. Through the phenol-sulfuric acid method was measured that Hot water extraction, acid extraction, and alkaline extraction. Drawing the standard curve to obtain the concentration of the glucose solution and the sample by applying the measured absorbance on the standard curve. Total sugar contents was measured after extraction with different solvents.(Hot water, 70% EtOH, 80% MeOH). The level of total sugar in Cordyceps militaris is highest in the hot water extraction with 658.4(${\mu}g/g$) and Coriolus versicolor in 649.7(${\mu}g/g$) and 679.0(${\mu}g/g$) was found as the highest in the acid extraction and the alkaline extraction. C. militaris and ASI 7025 showed the highest level in the hot water extraction. Finally, C. versicolor, Sparassis crispa showed that higher than the other mushrooms at the 1hr, 2hr microwave extraction. It was varied total sugar content according to the different extraction solvent and the extraction method.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.3
• /
• pp.149-154
• /
• 2007

This study was conducted to investigate the effect of ozone treatment on removal of brown color and ammonia-like odor produced from shark cartilage (SC) and to establish the optimal extraction conditions of chondroitin sulfate (CS) by NaOH and hot water. Treatment of SC with 0.3 ppm ozone water resulted in higher color $L^*$ value but lower $a^*$ and $b^*$ values compared with those of non-treated SC, without affecting its proximate compositions (moisture, protein, lipid, carbohydrate, and ash). Ozone treatment also increased the overall acceptability of SC by reducing ammonia-like odor. The optimum concentration and time for extraction of CS from SC using NaOH at $100^{\circ}C$ were 1 N and 120 min, respectively, with 10.02% of extraction yield. The total yield (10.01%) of CS obtained by 7 times repeated extraction with hot water at $100^{\circ}C$ was comparable to that of the 1 N NaOH extraction for 120 min at $100^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1363-1372
• /
• 2023

This study is concerned with the optimization of the manufacturing process of a hot water extract containing antioxidant activity from Lycium barbarum, traditionally known to have various physiological activities. For the establishment of the optimization process, the central composite design of response surface methodology(RSM) was used. Thirteen extraction processes were performed by encoding the independent variables, extraction temperature (65.9℃-94.1℃) and extraction time (2.59 hr-5.41 hr). As a result of the experiment, the optimal manufacturing conditions for the extract were 340.0 mg/100 g of GAE at an extraction temperature of 94.1℃ and an extraction time of 5 hr. The maximum yield of flavonoids was 22.44 mg/100 g of HES at an extraction temperature of 94.1℃ and an extraction time of 4 hr. The conditions for producing the extract with the maximum antioxidant capacity (DPPH 92.12%) were 90℃ and 4.5 hr extraction time. Therefore, the optimal manufacturing process conditions for extracts containing total phenol content, flavonoid content, and DPPH radical scavenging activity, which are dependent variables, were extraction temperature of 90-95℃ and extraction time of 4 hr, which were not significantly different from the actual values. Therefore, Lycium barbarum extract rich in total phenol and flavonoid content related to antioxidant function is expected to be used as a functional food and cosmetic material.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.408-414
• /
• 2019

In this study, an antioxidant was extracted from dandelion leaves using traditional hot water and ultrasonic extraction methods. In order to optimize the extraction yield and total flavonoid, an antioxidant, Box-Behnken design (BBD) model among response surface analysis methods was used. In the case of hot water extraction, the extraction temperature and time as well as the ratio of alcohol/ultrapure water were set as variables, and for the ultrasonic extraction, the ultrasonic survey century and irradiation time and the ratio of alcohol/ultrapure water were variables. Optimum extraction conditions in the hot water extraction method were the extraction temperature and time of $45.76^{\circ}C$ and 1.75 h and the ratio of alcohol/ultrapure water of 41.92 vol.%. While for the ultrasonic extraction method the survey century of 512.63 W, the ratio of alcohol/ultrapure water of 56.97 vol.% and the extraction time of 20.79 min were optimum conditions. Expected reaction yield and flavonoid content values under the optimized condition were calculated as 22.09 wt.% and 28.98 mg QE/mL dw, respectively. In addition, the error value of less than 3% was obtained validating our optimization process.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.184-188
• /
• 2002

This study was conducted to optimize hot water extraction process of cordyceps militaris for development beverage. Optimal condition for hot water extraction was investigated with changes in extraction concentration and temperature by response surface methodology. The content of soluble solid was effected with concentration. The efficiency of extraction for turbidity, total sugar, reducing sugar and protein increased with low concentration. The response variables had significant with concentration and the established polynomial model was suitable (p>0.05) model by lack-of-fit analysis. Optimal extraction conditions as the limited renditions of 2.0∼2.4% extractable solids, 1.5∼2.0% brix, l14∼120 $\mu\textrm{g}$/g total sugar, 10.5∼11.0 $\mu\textrm{g}$/ｇ reducing sugar and 110∼l15 $\mu\textrm{g}$/g protein were 95∼100$\^{C}$ and 4.0∼4.1% of concentration.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.293-298
• /
• 2000

${\beta}$-Glucan a kind of polysaccharide which is particularly abundant in Agaricus blazei is known as the bioactive materials especially anticancer agents. The process development of the isolation and the purification process of water soluble ${\beta}$-glucans from A. blazei was achieved. and the process operation variables were optimized. Crude polysaccharides (CR.PS) were obtained from A. blazei by hot water extraction filtration solvent precipitation dialysis and freeze drying. Neutral and acidic fraction of polysaccharides were separated from crude polysaccharides by ion chromatography and then high molecular weight and low molecular weight fraction were separated from neutral fraction by gel chromatography. Quantitative and qualitative analysis of each compounds were performed with FT-IR NMR spectroscopy. Based on these analysis the optimal conditions of temperatures operating time organic solvent volume for precipitation and dialysis time were determined.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• Food Engineering Progress
• /
• v.15 no.3
• /
• pp.221-229
• /
• 2011

Optimization study of the hot water extraction for enhancing antioxidative activity from Auricularia auricula was performed by Taguchi approach using orthogonal matrix $L_9(3^4)$ method. The correlation between DPPH radical scavenging activity and the components of samples extracted from different extraction conditions were also analyzed. The correlation coefficient between DPPH radical scavenging activity and melanin content of A. auricula were 0.93, indicating 'good correlation'. The optimum extraction conditions was obtained at the extraction time of 1 hr. temperature of $85^{\circ}C$, solid: water ratio of 1: 40(w/v) and frequency of 2 times. Under these conditions, values of maximum DPPH free radical scavenging activity and melanin contents of A. auricula were $67.21{\pm}2.17$ and $52.94{\pm}2.10 mg/g$, respectively. Melanin content of 1.6 times and DPPH free radical scavenging effect of 130% were enhanced by optimization.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.428-436
• /
• 2015

Five extraction conditions (AE, autoclave extraction; OE, oven extraction; HWSE, hot water and sonication extraction; HWASE, hot water acidified with 0.5% (v/v) acetic acid and sonication extraction; and BE, boiling extraction) were examined to compare the effects of different hot water extraction methods on the antioxidant properties of blueberries. The extraction yields of the AE, OE, HWSE, HWASE, and BE were 7.94%, 8.35%, 8.55% 9.15%, and 8.50%, respectively. The polyphenol and flavonoid contents of AE were 3.47 mg GAE/g and 1.59 mg RE/g, respectively, which were highest centents among others. Those of OE were ranked second to the highest. The total anthocyanin content of HWSE (5.29 mg/g) was significantly higher than that of others whereas that of AE showed the lowest content (0.96 mg/g). The order of ABTS radical and alkyl radical scavenging activities was as follows: AE > BE > OE > HWSE > HWASE. The antioxidant properties were considerably correspondent with the total polyphenol and flavonoid content. DPPH radical scavenging activity was quite high in HWSE, AE, and BE extraction, however, there were no significant differences among the five extraction methods in the aspect of $Fe^{2+}$ ion chelating activities. Moreover, AE showed the highest SOD activity, and protected the dermal fibroblast the best against $H_2O_2$-induced cytotoxicity. In conclusion, it was suggested that the autoclave extraction (AE) would be the most effective method for preparing blueberry hot water extracts with relatively high antioxidant activities.