• Proceedings of the Botanical Society of Korea Conference
• /
• 2002.04a
• /
• pp.104-104
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.40-40
• /
• 2006

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.158-162
• /
• 2001

SrS:Ce thin films for blue EL devices are prepared by Hot Wall Method and their crystallographic and optical characteristics are investigated by various methods. Deposition rates are decreased with substrate temperature, but increased with SrS cell temperature. The crystallographic characteristics are strongly affected by deposition rates. The peak of photoluminescence are found ar 470 and 540nm.

• The Plant Pathology Journal
• /
• v.18 no.3
• /
• pp.115-120
• /
• 2002

Xanthomonas axonopodis pv. glycines, the causal agent of bacterial pustule of soybean, induces hypersensitive response (HR) in a non-host plant, hot pepper (Capsicum annuum). A wild-type strain (8ra) and its non-patho-genic mutant (8-13) of X. axonopodis pv. glycines were inoculated into the pepper leaf tissues and their subcellular responses to the bacterial infections were examined by electron microscopy. Intrastructural changes related to HR were found in the leaf tissues infected with 8ra from 8 h after inoculation, characterized by separation of plasmalemma from the cell wall, formation of small vacuoles and vesicles, formation of cell wall apposition, and cellular necrosis. No such responses were observed in the tissues infected with the mutant. In 8ra, the bacterial cells were attached to the cell walls, with the cell wall material dissolved into and appearing to encapsulate the bacterial cells. The bacterial cells later became entirely embedded in the cell wall material. On the other hand, in 8-13, the bacterial cells were usually not attached tightly to the plant cell wall, and no or poor encapsulation of the bacteria by the wall material occurred, although these were encircled by rather loose wall materials at the later stages.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.146-147
• /
• 2009

$CuGaSe_2$ (CGS) layers were grown by the hot wall epitaxy method. The optimum temperatures of the substrate and source for growth turned out to be 450 and $610^{\circ}C$, respectively. Based on the absorption measurement, the band-gap variation of CGS was well interpreted by the Varshni's equation. By analyzing these emissions, a band diagram of the observed optical transitions was obtained. From the solar cell measurement, an 11.17 % efficiency on the n-CdS/p-CGS junction was achieved.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.344-344
• /
• 2004

한국원자력연구소에서는 사용후핵연료의 체적을 감소시켜 저장 안전성 및 경제성을 확보키 위한 사용후핵연료 차세대관리 공정(ACP)을 개발하고 있다. 이 기술의 개발을 위해서는 사용후핵연료를 사용한 실증시험이 필수적이며, 이를 위한 ${\alpha}-{\gamma}$ type의 hot cell 시설 및 부속시설이 필요하다. 연구소는 별도의 실증시설에 요구되는 고 비용을 줄이기 위해 현재 연구소가 보유하고 있는 조사재시험시설(IMEF)의 지하에 위치한 예비 hot cell을 활용키로 하고 차세대관리 종합공정의 특성 및 용도에 맞는 시설의 수정/보완 업무를 수행해오고 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1021-1024
• /
• 2004

During demonstrations of a process conditioning spent nuclear fuels, it may be necessary to transport modularized parts of process equipment out of a hot cell because of modules' failure or completion of demonstrations. It may be not easy to transport modules because modules will be contaminated. For this purpose, we have developed a prototype of a device transporting radioactive contaminated materials. We have analyzed conditions of a hot cell and requirements of the device, designed and manufactured a scaled-down prototype of the device, and done some performance tests such as running on the rail, running on the flat floor, and carrying capability of a sliding upper part. From the tests, it has been shown that running on the rail and floor was smooth but the sliding part was deflected if the sliding distance was long. These result will be reflected to a design of the improved transporting device which will be used during demonstrations.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.353-358
• /
• 1996

Hot cell에서의 활용을 전제로 한 용접기술 개발을 목적으로 가용한 용접방식의 적용 타당성 및 용접부 특성에 대해 조사, 분석하였다. 적용한 용접방식은 Upset butt저항용접, GTAW, LBW이었다. 각 용접방식에 따른 기계적 시험에 있어서 공히 용접부가 아닌 피복관 파괴로 연료봉 봉단용 접부의 품질요건을 만족하였으며, 용접부 형상 및 미세경도 분석에 있어서는 열영향부가 GTAW, Upset butt저항용접, LBW의 순으로 작게 나타났다. 또, 미세조직상으로는 거의 유사한 조직의 martensitic $\alpha$'와 Widmanstatten조직이 혼합되어 있었다. 따라서 Upset butt 저항용접, GTAW, LBW 방식을 적용한 Zr-4 핵연료 피복관의 봉단용접은 가능했으며, Hot cell 적용을 고려시 LBW 용접방식이 적절하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.157-163
• /
• 2002

A new flash EEPROM device with p^＋ poly-Si control gate and n^＋ poly-Si floating side gate was fabricated and characterized. The n^＋ poly-Si gate is formed on both sides of the p^＋ poly-Si gate, and controls the underneath channel conductivity depending on the number of electron in it. The cell was programmed by hot-carrier-injection at the drain extension, and erased by direct tunneling. The proposed EEPROM cell can be scaled down to 50 nm or less. Shown were measured programming and erasing characteristics. The channel resistance with the write operation was increased by at least 3 times.