• 제목/요약/키워드: Hot Cell

검색결과 914건 처리시간 0.025초

선진 핵연료주기 시설(AFC)의 부식건전성 조사, 분석 (Corrosion Evaluation for Advanced Fuel Cycle Facilities)

  • 황성식
    • Corrosion Science and Technology
    • /
    • 제11권6호
    • /
    • pp.213-217
    • /
    • 2012
  • 1) 선진 핵연료주기시설 관련 규제기술과 관련하여 인허가 안전심사의 경험이 없으며, 선진 핵연료주기시설 인허가를 위한 규제체계 및 안전성 평가방법 등의 개발이 필요한 단계이며 관련기기와 제반 공정에서 재료의 내식성을 평가하는 기준마련이 시급하다. 2) 선진 핵주기시설 관련 국내 기술수준을 분석하였고 그 핵심 공정인 전해환원, 전해정련, 전해제련공정의 실험변수를 조사하고 평가 필요항목을 정리하였다. 3) 전해환원과 전해정련공정의 경우 Hot-cell 내에 수분 및 산소가 일정 수준 이하로 유지되는 경우, 재료의 부식은 고려하지 않아도 되나 우라늄 잉곳 제조 공정에서 수냉 코일을 사용하게 되는 경우 물에 의한 부식을 고려해야 한다. 4) 전해 제련공정의 경우 LCC, RAR, Cd 증류공정에서 플랜지의 O-ring을 보호하기 위해 수냉 코일을 사용하게 되는 경우 물에 의한 부식을 고려해야 한다.

유산균 발효 배초향 추출물의 항산화 활성과 주름개선 효능 (Effect of Anti-Skin Wrinkle and Antioxidant of Agastache rugosa Kentz through Fermentation Process of the lactic acid)

  • 김남영;박대수;이현용
    • 한국약용작물학회지
    • /
    • 제23권1호
    • /
    • pp.37-42
    • /
    • 2015
  • This study was to investigate anti-skin wrinkle effect of Agastache rugosa Kentz extracts by extraction processes. In the comparison of the effect of the solvent extraction, the extracts by 70% ethanol (EE) showed better biological activities that those by hot water. Therefore, further fermented Agastache rugosa was applied to 70% ethanol extraction process (FEE). FEE showed higher DPPH scavenging activity of 62.98% than EE's 62.71% at $1.0mg/m{\ell}$, but there was no significant. Elastase inhibition was measured 23.0% from FEE at $1.0mg/m{\ell}$. Cytotoxicity showed the highest 16.26% from FEE, this value is safe in the cell experiment. Collagen production showed $113.1ng/m{\ell}$ from FEE, on the other hand EE was measured $77.4ng/m{\ell}$ in adding $1.0mg/m{\ell}$. MMP-1 production was observed $1398pg/m{\ell}$ from FEE and EE was measured $1632pg/m{\ell}$. These results were found the highest antioxidant and anti-wrinkle effect. As a result, it was also confirmed that anti-skin wrinkle activities of the Agastache rugosa Kentz extract was correlated with anti-oxidant activities.

맥문동탕 용매 분획물의 UV에 의한 피부손상 개선 효능평가 (UV-induced skin damage improvement effects of solvent fraction from Maekmoondong-tang)

  • 유재묘;강윤환;김보미;김동희;박태순
    • Journal of Applied Biological Chemistry
    • /
    • 제61권3호
    • /
    • pp.283-290
    • /
    • 2018
  • 맥문동탕 열수추출물의 용매분획물을 이용하여 1-1-diphenyl-2-picryl-hydrazyl radical scavenge, 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenge, elastase, tyrosinase 억제 효과를 검증하였고 그 결과 에틸아세테이트 분획물(MW-EA)에서 가장 우수한 저해활성을 보여주었다. 세포를 이용한 활성 검증에서는 MW-EA를 처리하였을 때 ROS 저해활성에서 34% ($100{\mu}g/mL$), MMPs 저해 50% ($100{\mu}g/mL$) 이상, 미백 활성에서는 tyrosinase를 25% ($50{\mu}g/mL$) 억제하는 것을 확인 하였다. 따라서 맥문동탕은 피부개선 소재로서 개발 가능성이 높다고 사료된다.

Effect of quercetin on the production of nitric oxide in murine macrophages stimulated with lipopolysaccharide from Prevotella intermedia

  • Cho, Yun-Jung;Kim, Sung-Jo
    • Journal of Periodontal and Implant Science
    • /
    • 제43권4호
    • /
    • pp.191-197
    • /
    • 2013
  • Purpose: Nitric oxide (NO) is a short-lived bioactive molecule that is known to play an important role in the pathogenesis of periodontal disease. In the current study, we investigated the effect of the flavonoid quercetin on the production of NO in murine macrophages activated with lipopolysaccharide (LPS) from Prevotella intermedia, a pathogen related to inflammatory periodontal disease, and tried to elucidate the underlying mechanisms of action. Methods: LPS was isolated from P. intermedia ATCC 25611 cells by the standard hot phenol-water method. The concentration of NO in cell culture supernatants was determined by measuring the accumulation of nitrite. Inducible NO synthase (iNOS) and heme oxygenase-1 (HO-1) protein expression, phosphorylation of c-Jun N-terminal kinase (JNK) and p38, inhibitory ${\kappa}B$ $(I{\kappa}B)-{\alpha}$ degradation, and signal transducer and activator of transcription 1 (STAT1) phosphorylation were analyzed via immunoblotting. Results: Quercetin significantly attenuated iNOS-derived NO production in RAW246.7 cells activated by P. intermedia LPS. In addition, quercetin induced HO-1 protein expression in cells activated with P. intermedia LPS. Tin protoporphyrin IX (SnPP), a competitive inhibitor of HO-1, abolished the inhibitory effect of quercetin on LPS-induced NO production. Quercetin did not affect the phosphorylation of JNK and p38 induced by P. intermedia LPS. The degradation of $I{\kappa}B-{\alpha}$ induced by P. intermedia LPS was inhibited when the cells were treated with quercetin. Quercetin also inhibited LPS-induced STAT1 signaling. Conclusions: Quercetin significantly inhibits iNOS-derived NO production in murine macrophages activated by P. intermedia LPS via anti-inflammatory HO-1 induction and inhibition of the nuclear factor-${\kappa}B$ and STAT1 signaling pathways. Our study suggests that quercetin may contribute to the modulation of host-destructive responses mediated by NO and appears to have potential as a novel therapeutic agent for treating inflammatory periodontal disease.

Evaluation of Antioxidant Activities and Active Compounds Separated from Water Soluble Extracts of Korean Black Pine Barks

  • Shen, Chang-Zhe;Jun, Hong-Young;Choi, Sung-Ho;Kim, Young-Man;Jung, Eun-Joo;Oh, Gi-Su;Joo, Sung-Jin;Kim, Sung-Hyun;Kim, Il-Kwang
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권12호
    • /
    • pp.3567-3572
    • /
    • 2010
  • Black pine barks from the southern region of Korea were extracted using pressurized hot water and the water soluble extracts were then separated in a stepwise fashion using a variety of solvents, column chromatography (CC), thin layer chromatography (TLC), and high pressure liquid chromatography (HPLC). The antioxidant activities of each fraction and the active compounds were determined based on the radical scavenging activities of 2,2-diphenyl-1-picrylhydrazyl (DPPH), reductive potential of ferric ion, and total phenol contents. A DPPH test showed that the half maximal effective concentration ($EC_{50}$ value : $6.59{\pm}0.31\;{\mu}g/mL$) of the ethyl acetate fraction (ca. 0.67%) was almost the same as that of the control compounds and inversely proportional to the value of the total phenol contents. The cell viability of the water extracts was confirmed by methyl thiazol-2-yl-2,5-diphenyl tetrazolium bromide (MTT) with enzyme linked immune sorbent assay (ELISA). Catechin, epicatechin, quercetin and ferulic acid were isolated from the ethyl acetate fraction as active compounds and identified by nuclear magnetic resonance. The antioxidant activity as value of DPPH of each of the separated compounds was lower than the ethyl acetate fraction, and ferulic acid was the lowest among these compounds.

추출 방법에 따른 비파엽 추출물의 미백 및 항염활성에 관한 연구 (A Study on Whitening and Anti-inflammatory Effects of Eriobotrya Japonica Leaf Extracts with Different Extraction Methods)

  • 박정옥;박진오;주철규
    • 대한화장품학회지
    • /
    • 제41권2호
    • /
    • pp.151-157
    • /
    • 2015
  • 본 연구에서는 기능성 화장품 소재 개발을 위하여 비파엽 추출물을 제조하고 효소 및 세포 활성평가를 진행하였다. 활성평가는 tyrosinase 측정법을 이용한 미백 효능, NO 측정법을 이용한 항염 효능에 대한 활성등을 분석하였다. 미백 효능 관련 tyrosinase 활성 저해는 10% 농도의 비파엽 초임계 추출물에서 미약한 활성을 나타내었다. 항염 효능 관련 NO 활성 저해 분석 결과, 초임계 추출물, 에탄올 환류 추출물, 열수 추출물의 순서로 NO 억제 활성을 나타내었다. MTT assay를 실시한 결과, 70% 에탄올 환류 추출물 5% 처리를 제외하고는 모든 농도에서 세포독성이 관찰되지 않았다. 미백 효능 관련 멜라닌 생성 저해는 5% 처리 농도에서 30%, 70% 에탄올 환류 추출물이 강하게 멜라닌 생성을 억제하는 결과를 보였다. 이상의 연구결과들로부터 비파엽 추출물 제조를 통한 우수한 항염 효능 및 미백 효능 관련 활성을 나타내는 추출조건을 도출하였으며, 향후 기능성 화장품 소재 개발을 위한 기초 연구용 자료로서의 역할을 제시할 수 있을 것이다.

양방향 스털링엔진/발전기의 효율 특성 연구 (A Study on Generating efficiency of the Double Acting Stirling Engine/Generator)

  • 박성제;고준석;홍용주;김효봉;염한길;인세환
    • 한국수소및신에너지학회논문집
    • /
    • 제27권1호
    • /
    • pp.114-120
    • /
    • 2016
  • This paper describes generating efficiency characteristics of the double acting Stirling engine/generator for domestic small-scale CHP (Combined Heat and Power) system. In small distributed generation applications, Stirling engine has competition from fuel cell, microturbine and etc. In order to be economical in the applications, a long life with minimum maintenance is generally required. Free piston Stirling engine (FPSE) has no crank and rotating parts to generate lateral forces and require lubrication. Double acting Stirling engine/generator has one displacer and two power piston which are supported by flexure springs. Two power pistons oscillate with symmetric displacement and are connected with moving magnet type linear generators for power generation from PV work. In experiments, 1 kW class double acting free piston Stirling engine/generator is fabricated and tested. Heat is supplied to hot end of engine by the combustion of natural gas and converted to electric power by linear generators which are assembled with power pistons. The electric parameters such as voltage, current and phase are measured with for variable flow rate of fuel gas. Especially, generating efficiency of FPSE is measured with three different measurement methods. Generating efficiency of the double acting Stirling engine/alternator is about 24%.

전산유체해석을 이용한 열교환형 수증기 개질기의 디자인 파라미터 연구 (Study on the Design Parameters of a Heat Exchange Steam Reformer (HESR) using CFD)

  • 양찬욱;이율호;박상현;양충모;박성진
    • 한국수소및신에너지학회논문집
    • /
    • 제27권1호
    • /
    • pp.1-12
    • /
    • 2016
  • In this study, CFD model for a Heat Exchange Steam Reformer (HESR) used for a 10kW SOFC system is developed for the design optimization of the HESR. The model is used to explore the effect of design parameters on the performance of the HESR. In the HESR, heat is delivered from the hot gas channel to the fuel channel to supply the heat required for the fuel reforming. In the fuel channel where the fuel is reformed, thermo-fluid dynamics, heat transfer, and chemical reaction are considered to predict the performance of the reformer. The model is validated with experimental data within 2~3% error. The validated model is used for the parametric study of the HESR design. Channel length, channel diameter, and flow direction are selected as the design parameters. The effects of the HESR design parameters on the outlet temperature, outlet H2 mole fraction, and pressure drop across the reformer are presented using the model.

ITO/p-InP 태양전지 제작 (The fabrication of ITO/p-InP solar cells)

  • 맹경호;김선태;송복신;문동찬
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제7권3호
    • /
    • pp.243-251
    • /
    • 1994
  • ITO(Indium Tin Oxide) film with thickness of 1500.angs. was prepared by an e-beam evaporator onto a glass and a p-type InP wafer (100) LEC grown Zn-doped p=2.3*10$\^$16/cm$\^$-3/), in which the components of ITO used for evaporation source were hot pressed pellets 1 mole% ln$\_$2/O$\_$3/+9 mole% SnO$\_$2/, and evaporated in O$\_$2/ ambient. The optimum conditions to preparation of ITO thin film were the substrate temperature of 350.deg. C, the injected oxygen pressure of 2*10$\^$-4/ torr, and the evaporation speed of 0.2-0.3.angs./sec, respectively. In these optimum conditions, the resistivity and the carrier concentration were 5.3*10$\^$-3/ .ohm.-cm, 6.5*10$\^$20/cm$\^$-3/, and the transmittance was over 80%. From the results of J-V measurements in ITO/p-InP structure solar cells, the higher pressure of injected oxygen, the more open circuit voltage. The efficiency of ITO/p-InP solar cell without the grid line contact, prepared by the optimum evaporation conditions, was 7.19%. By using the grid line contact, the efficiency, the open circuit voltage, the short circuit current density, the fill factor, the series resistance, and the shunt resistance were 8.5%, 0.47V, 29.48 mAcm$\^$-2/ , 61.35%, 3.ohm., and 26.6k.ohm., respectively.

  • PDF

삼섬유를 이용한 특수기능지 개발 (제 1보) - 소다펄프화 삼 섬유의 수초지 특성 - (Manufacture of Specialty Paper with Hemp Bast Fiber Cultivated in Korea (Part 1) - Characteristics of Hemp-Wood Paper by Soda Pulping -)

  • 이다희;이명구
    • 펄프종이기술
    • /
    • 제45권6호
    • /
    • pp.30-35
    • /
    • 2013
  • To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.