• 한국재료학회지
• /
• 제19권6호
• /
• pp.319-324
• /
• 2009

The deposition behavior and structural and magnetic properties of electroless Co-B and Co-Fe-B deposits, as well as the amorphous ribbon substrates, were investigated. These Co-based alloy deposits exhibited characteristic polycrystalline structures and surface morphology and magnetic properties that were dependent on the type of amorphous substrates. The catalytic activity sequence of the amorphous ribbon electrodes for anodic oxidation of DMAB was estimated from the current density-potential curve in the anodic partial electrolytic bath that did not contain the metal ions. Both the deposition rate and potential in the initial region were obtained in order of the catalytic activity, depending on the alloy compositions of the substrates. The deposition rate linearly varied against the deposition time. The initial deposition potential may have also determined the structural and magnetic properties of the deposit based on the thickness of ${\mu}m$ order. Furthermore, a basic study of the electroless deposition processes on an amorphous ribbon substrate has been carried out in connection with the structural and magnetic properties of the deposits.

• Journal of Information Technology Applications and Management
• /
• 제28권1호
• /
• pp.33-41
• /
• 2021

In this study, we estimated the number of secondary COVID-19 infections caused by students with potential transmission potential home. When the existing Monte Carlo method was applied to Korean data, the average number of household members of the second COVID-19 infected was predicted. The summary of this study is as follows. First, in general, the number of secondary infections by students returning home from school is greatly influenced by the virus infection rate of each student group they contact while returning home from school. Korea-based empirical research on this is needed. Second, the number of secondary infections by Korean students was relatively lower than that of previous studies. This can be interpreted as being due to the domestic furniture structure. Third, unlike previous studies that assumed the distribution of secondary infected individuals as normal distribution, assuming a negative binomial distribution, the number of secondary infected individuals was sensitively changed according to the estimated parameters. Interpretation of this result shows that the number of secondary infections may vary depending on the time of decision making, the target region, and the target student group. Finally, according to the results of this analysis, a proposal was made to support education policy decisions.

• Journal of applied mathematics & informatics
• /
• 제6권1호
• /
• pp.279-289
• /
• 1999

Given n points in the plane the planar convex hull prob-lem in that of finding which of these points belong to the perimeter of the smallest convex region (a polygon) containing all n points. Here we suggest two kinds of methods. First we present a new sequential method for constructing the pla-nar convex hull O(1.5n) time in the quadratic decision tree model. Second using the sequential method we suggest a new parallel algo-rithm which solve the planar convex hull O(1.5n/p) time on a maspar Machine (CREW-PRAM) with O(n) processors. Also when we run on a maspar Machine we achieved a 37. 156-fold speedup with 64 pro-cessor.

• Journal of Information Technology Applications and Management
• /
• 제30권1호
• /
• pp.11-19
• /
• 2023

To remove unnecessary background from tooth X-ray images and enhance the sharpness of tooth and gum images, image processing techniques including contrast adjustment and histogram equalization are used. The introduction of two methods for detecting the boundary of the tooth and gum region and separating the tooth and gum from the background. In both cases, the background of the tooth X-ray images could be removed as a result, improving the quality of the images. The proposed method improves MTF (Modulation Transfer Function), an image performance indicator, as a result of measuring MTF. The original image's spatial frequency ranged from 4.73 to 11.40 lp/mm at the 10% response, whereas the proposed image's spatial frequency ranged from 10.90 to 11.85 lp/mm, giving uniformly enhanced results. In contrast, tooth and gums could not be completely separated from the background using Apple's Lift subject from background function.

• 충청수학회지
• /
• 제33권1호
• /
• pp.157-163
• /
• 2020

Conley introduced attracting sets and repelling sets for a flow on a topological space and showed that if f is a flow on a compact metric space, then 𝓡(f) = ⋂{A_U ∪ A*_U |U is a trapping region for f}. In this paper we introduce chain recurrent set, trapping region, attracting set and repelling set for a flow f on a TVS-cone metric space and prove that if f is a flow on a compact TVS-cone metric space, then 𝓡(f) = ⋂{A_U ∪ A*_U |U is a trapping region for f}.

• 상하수도학회지
• /
• 제33권2호
• /
• pp.95-101
• /
• 2019

High voltage impulse(HVI) has been gained attention as an alternate technique controlling $CaCO_3$ scale formation. Investigation of key operational parameters for HVI is important, however, those had not been reported yet. In this study, the effect of temperature and applied voltage of HVI on $Ca^{2+}$ concentration was studied. As the applied voltage from 0 to 15kV and the temperature increased from 20 to $60^{\circ}C$, the $Ca^{2+}$ concentration decreased, indicating that the aqueous $Ca^{2+}$ precipitated to $CaCO_3$. The $Ca^{2+}$ concentration decreased up to 81% under the condition of 15kV and $60^{\circ}C$. Rate constant for the precipitation reaction, k was determined under different temper1ature and voltage. The reaction rate constant under the 15kV and $60^{\circ}C$ condition was evaluated to $66{\times}10^{-3}L/(mmol{\cdot}hr)$, which was 5 times greater than the k of the reaction without HVI at same temperature. The increases in k by HVI at higher temperature region(40 to $60^{\circ}C$) was much greater than at lower temperature region(20 to $40^{\circ}C$), which implies temperature is more important parameter than voltage for reducing $Ca^{2+}$ concentration at high temperature region. These results show that the HVI induction accelerates the precipitation to $CaCO_3$, particularly much faster at higher temperature.

• 대한의생명과학회지
• /
• 제27권3호
• /
• pp.177-181
• /
• 2021

Allergy is an immune response that appears in certain people, and reactions such as coughing, shortness of breath, and hives occur. The immune system plays an important role in homeostasis and host defense, and allergies cause hypersensitivity reactions when an imbalance of immunity occurs. Mutations in the TLR genes are associated with autoimmune conditions such as allergies and asthma. It has been reported that a locus in the TLR1-TLR6-TLR10 region may be associated with atopic sensitization or allergy. Therefore, the purpose of this study was to select an allergy patient group and a healthy control group to determine how the genetic mutation of TLR1 affects the onset of disease. This study was conducted in 709 patients and 5,025 control groups out of 10,956 patients with data from KARE and HEXA cohorts. As a result of logistic regression analysis of 6 SNPs selected from the TLR1 gene, only rs117033348 showed a statistically significant correlation (P = 0.002356). The influence of rs117033348 was examined using PolyPhen-2, and a significant result was shown. Therefore, it can be predicted that the G base in rs117033348 will have an influence on the human body. In addition, Geography of Genetic Variants browser was used to confirm the geographical distribution of allele frequencies for the TLR1 gene. Although it was found that there was a large racial difference in the prevalence of TLR1 SNP, it could be confirmed that the polymorphism of rs117033348 conducted in this study was only specific in East Asia when compared with each race.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.330-340
• /
• 2024

Al-Mg-Si alloys are light weight and have excellent corrosion resistance, and are attracting attention as a liner material for high-pressure hydrogen containers in hydrogen fuel cell vehicles. Because it has excellent plastic hardening properties, it is also applied to car body panel materials, but it is moderate in strength, so research to improve the strength by adding Si-rich or Cu is in progress. So far, the authors have conducted research on the intergranular fracture of alloys with excessive Si addition from the macroscopic mechanical point of view, such as specimen shape. To evaluate their impact tensile properties, the split-Hopkinson bar impact test was performed using thin plate specimens of coarse and fine grain alloys of Al-Mg-X (X = Cr,Si) alloy. The effect of the shape of the specimen on the characteristics was studied through finite element method (FEM) analysis. As a result, it was found that the intergranular fracture of the alloy with excessive Si depended on the specimen width (W)/grain size (d), which can be expressed by the specimen size and grain size. As W/d decreases, the intergranular fracture transforms into a transgranular fracture. As the strain rate increases, the fracture elongation decreases, and the fracture surface of the intergranular fracture becomes more brittle. It was confirmed that intergranular fracture occurred in the high strain rate region even in materials with small grain sizes.

• 대한환경공학회지
• /
• 제31권10호
• /
• pp.933-940
• /
• 2009

본 연구에서는 분무화염의 기초적인 물리현상을 해명하기 위하여 층류 대향류장에 형성된 분무 화염에 2차원 직접 수치계산(Direct numerical simulation, DNS)을 적용하여, 당량비 및 연료종이 분무화염 구조에 미치는 영향에 대하여 관찰하였다. 기상에 대해서는 질량 보존식, 운동량 보존식, 에너지 보존식을 오일리안(Eulerian) 법으로 계산하였으며, 액적에 대해서는 화염중의 모든 개개의 유적을 라그란지안(Lagrangian) 법으로 추적하였다. 액체 연료로는 n-데칸 ($C_{10}H_{22}$)과 n-헵탄($C_7H_{16}$)을 이용하였으며, 연소반응 모델에는 총괄반응식을 이용하였다. 당량비가 증가함에 따라 착화가 빠르며, 고온영역도 넓게 분포하고 있다. 그러나, 최대 온도치는 당량비가 증가함에 따라 한번 증가한 후 감소하는 경향을 나타내고 있다. 당량비가 클수록 최대 온도가 감소하는 것은 분무화염 내부의 군연소 거동에 의한 냉각효과 때문이라고 생각된다. 또한, n-헵탄은 n-데칸과 비교하여 증발속도가 빠르기 때문에 넓은 고온 영역을 형성하지만 최대 온도는 거의 같은 값을 나타내었다.

• 한국항행학회논문지
• /
• 제14권3호
• /
• pp.452-458
• /
• 2010

전원이나 CPU 같은 컴퓨팅 자원의 제약을 받는 임베디드 시스템의 경우, 데이터의 컴퓨터 화면 디스플레이로 인한 오버헤드는 시스템의 성능에 지대한 영향을 줄 수 있다. 본 논문은 ARM9 방식의 S3C2440A 마이크로프로세서가 내장된 LN2440SBC 시스템에서, LCD(liquid crystal display)의 구동을 위해 필요한 ARM 코어, LCD 컨트롤러, SPI(serial peripheral interface) 같은 LCD-구동 요소들의 초기화 방법을 설명한다. 또한 픽셀 디스플레이 함수와 디스플레이로 인한 오버헤드를 줄이기 위한 가상스크린을 이용한 디스플레이 방법을 소개한다. 가상스크린은 한 LCD 화면 디스플레이에 필요한 메모리 용량보다 매우 큰 용량의 메모리 공간으로서, 가상스크린 내의 특정 영역 디스플레이는 그 영역을 뷰포트(view port) 영역으로 지정함으로서 행해진다. 이 같은 가상스크린을 이용한 디스플레이는 임베디드 시스템에서 동시에 수행되는 여러 태스크들이 자신의 수행 결과를 생성하고 그 결과를 각기 화면에 출력하는 경우에 유용하며, 특히 각 태스크의 수행 결과 데이터가 모두 변경되지 않고 일부분만 변경되어 디스플레이 되는 경우에 더욱 그러하다. 이런 임베디드 시스템의 경우, 각 태스크들이 가상스크린의 메모리 영역을 효율적으로 나누어 사용할 경우 디스플레이 오버헤드를 최소화 할 수 있다. 가상스크린을 사용하는 경우와 아닌 경우의 성능 비교를 위해 두 개의 다른 이미지를 번갈아 가며 디스플레이하고 소요 시간을 측정했다. 그 결과 가상 스크린을 사용할 경우가 그렇지 않은 경우에 비해 약 5배의 빠른 출력 속도를 보인다.