• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.193-197
• /
• 2008

애니메이션의 캐릭터 디자인은 인물의 성격, 극중 역할, 성장배경 등 캐릭터의 설정내용에 외관을 일치시킴으로써 시각적 개연성을 확보하기 위한 수단으로 사용된다. 그중 일본 로봇 애니메이션에서 흔히 볼 수 있는 뿔은 로봇물의 전형성인 동시에 서양의 그것과 비교하여 문화적 차이를 확인할 수 있는 사례이기도 하다. 로봇 디자인에 뿔이 적용된 사례는 쉽게 찾아볼 수 있으나 그중에서도 "마징가Z"나 "게타로보", "UFO로보 그랜다이저"와 같은 나가이 고의 작품은 뿔이 애니메이션의 로봇 디자인에 있어 하나의 유형으로 자리 잡는데 결정적인 역할을 하였다. 나가이 고의 작품에 있어서 뿔은 단순한 장식적인 기능을 넘어 그가 말하고자하는 인간성 저변에 깔려 있는 폭력적 본성을 시각화하고자 하는 도구로 사용되었다.

• 복식문화연구
• /
• 제9권4호
• /
• pp.664-676
• /
• 2001

This study highlights the homogeneity in the heritage of the costume cultures between the Gulf of Aden, a part of the Horn region of Africa and the Arab region of West. Asia. Specifically, a cross-cultural perspective is used to examine the similarities between the two regions based on their (1) geographic living cultures and (2) the use of a costume accessory called Burga-a face veil. The current trend in research on the traditional costume culture of Africa mostly ties art with the traditional costume culture and examines its from an aesthetic or animalism perspective rather than from a cross cultural Perspective. Compared to Previous research in this area this study used literature reviews and Pictorial analysis to analyze costume cultures from a cross-cultural perspective. The Burga, which is worn in the low lands of the Horn region, which is located between the West Asia and African continents, as well as the Arab region, shows a reciprocal cultural exchange between the two regions. Similarities can be found in the shape, design, decorative elements, and the way the Bursa was worn in two regions. Although the Burga as a face veil is only a small part of a costume, it reaffirms the similar living cultures and geographic characteristics of the two regions. As the living culture environment becomes similar around the world, this study should help with cross culture negotiations as well as forther the development of traditional costume research.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.53-60
• /
• 2004

In this paper, the radar antenna of navigation radar on helicopter was suggested to Ka-band lens antenna. It is type of the streamlined convex lens to reduce the air resistivity when helicopter was navigated. Although aperture area is smaller than the standard antenna just like horns, the gain is higher and beamwidth is smaller than standard horns. We made the lens by using maximum flare angle of the horn and dielectric constant of the lens. As a result, when aperture diameter was 280mm and focal length was 145mm, the return loss -21.25dB, the gain was 32.2dBi, E and H beamwidth was $1.8^{\circ}$(E-plane), $1.4^{\circ}$(H-plane), nearly $1.5^{\circ}$, and side-lobe level was -18.4 dB(E-plane), -19.5dB(H-plane) lower were presented. So this suggested type can be used for the radar antenna of navigation radar on helicopter, and it will possible just a little some sidelobe suppression by using the choked horn as a feeder horn.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.84-91
• /
• 2013

Ultrasonic flip-chip bonding needs a precise bonding tool which delivers ultrasonic energy into chip bumps effectively to use the selected resonance mode and frequency of the horn structure. The bonding tool is excited at the resonance frequency and the input and output ports should locate at the anti-nodal points of the resonance mode. In this study, we propose new design method with topology optimization for ultrasonic bonding tools. The SIMP(solid isotropic material with penalization) method is used to formulate topology optimization and OC(optimal criteria) algorithm is adopted for the update scheme. MAC(modal assurance criterion) tracking is used for the target frequency and mode. We fabricate two prototypes of ultrasonic tools which are based on 3D optimization models after reviewing 2D and 3D topology optimization results. The prototypes are satisfied with the ultrasonic frequency and vibration amplitude as the ultrasonic bonding tools.

• 한국전자파학회논문지
• /
• 제20권12호
• /
• pp.1308-1315
• /
• 2009

본 논문에서는 X-밴드용 완전 편파 scatterometer 시스템(HPS: Hongik Polarimetric Scatterometer) 설계와 제작된 측정 시스템 성능 검증을 위해 이론적으로 잘 알려진 점 목표물(point-target)의 주파수 응답 특성을 측정하는 연구 결과를 선보인다. X-밴드용 완전 편파 scatterometer 시스템은 크게 OMT(Orthogonal Mode Transducer)+horn 안테나, 이들의 입사각을 조절하는 입사각 제어 부분, 네트워크 분석기와 X-밴드용 주파수 변환 회로로 구성되는 송수신기, 이 장비들을 위한 지지용 이동식 붐대로 구성된다. 측정용 안테나의 수직과 수평 입사각 조절을 위해 각도 센서를 이용하며, 모든 입사각에서 완전 편파의 데이터를 획득할 수 있도록 편파 선택용 스위치 회로를 사용한다. 또한, 설계된 측정 시스템의 성능 검증을 위하여 OMT+horn 안테나를 이용한 수동 반사기(corner reflector)의 주파수 응답 특성 즉, 완전 편파 RCS(Radar Cross Section)를 측정한다.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.620-628
• /
• 2007

H 섹터 혼 안테나는 일정한 빔 커버리지를 가지면서 빔 조향을 하는 광대역 위상 배열 송신기의 복사 소자로 유용하다. 본 논문에서는 상호 결합을 이용하여 3:1 주파수 대역과 ${\pm}60^{\circ}$의 빔 조향 범위를 갖는 광대역 E-면 H 섹터 혼 위상 배열 안테나를 설계하였다. 주자계면에서 반전력 빔 폭이 $30{\sim}50^{\circ}$을 갖는 H 섹터 혼 안테나를 설계하였다. 도파관 시뮬레이터를 이용하여 상호 결합을 포함하는 능동 반사 계수를 계산하였고, 광대역 주파수 범위에서 상호 결합에 의하여 능동 반사 특성이 개선되었다. 이러한 결과를 이용하여 $8{\times}1$ H 섹터 혼 위상 배열안테나를 제작하였다. 주자계면에서의 반전력 빔 폭과 능동 반사 계수의 측정 결과는 시뮬레이션 결과와 잘 일치하였다. 빔 조향된 복사 빔들의 첨두치 패턴은 능동 소자 패턴과 잘 일치하였다. 3:1 주파수 대역과 빔 조향 범위에서 능동 반사 계수는 대부분 0.3 이하로 측정되었다.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.25-30
• /
• 2018

Recently The automotive industry is trying to increase the energy efficiency by reducing the weight of the car body and engine components as a way to achieve high energy efficiency. In particular, the reduction of the weight of the vehicle through the weight reduction of the vehicle body has the advantage that the fuel consumption and the output can be improved. But at the same time, there is the disadvantage that the strength becomes weak due to the reduction of the material thickness. Therefore, in order to overcome these disadvantages, materials with high strength according to the unit thickness have been actively developed, and researches for applying them have also been increasing. In this study, we will investigate the application of cold rolled steel sheet, which is a lightweight material, to a horn bracket that secures a installed in an automobile engine room. The horn bracket secures the horn on the car engine and is bolted to the outer wall of the engine. The momentum is acted on the bracket due to the distance between the bolt fastening part and the car horn installed on the bracket end side. Therefore, the body part of the bracket is more likely to be destroyed by the influence of the continuous stress. In this paper, design optimization for weight reduction and strength enhancement was performed to solve this problem, and possibility of applying the rolled steel sheet material as lightweight material by tensile test and fabrication was confirmed.

• 한국전자파학회논문지
• /
• 제18권4호
• /
• pp.430-439
• /
• 2007

본 논문에서는 유전자 알고리즘을 이용하여 시간 영역 측정에 사용할 광대역 TEM 혼 안테나를 개발하였다. 안테나 개발에 고려된 설계 목표로는 $2{\sim}10\;GHz$의 주파수 영역에서 -10 dB 이하(VSWR<2)의 입력단 반사 손실과, 대역폭 내에서 높은 복사 이득 그리고 낮은 이득 편차이다. 또한 TEM 혼 안테나의 전체 크기를 줄이며 휴대가 용이하도록 하기 위해 안테나 본체와 급전부를 연결할 광대역의 balun을 설계하였다. 제작된 TEM 혼 안테나의 주파수 영역 측정 결과 $2{\sim}10\;GHz$에서 -10 dB 반사 손실을 만족하며, 기존의 삼각 플레이트 형태의 TEM 혼 안테나와 비교하였을 때 그 부피가 80 % 감소하였다. 안테나의 broadside 이득 값은 $2{\sim}10\;GHz$ 대역에서 12 dBi 기준으로 이득 편차가 6 dB 이하를 만족한다. 안테나의 시간 영역 측정 결과 group delay의 변화폭은 0.4 ns 이하를 만족하며, 펄스 측정시 송신과 수신 신호의 상승 시간은 각각 58.5 ps와 66.5 ps로 대략 10 % 이내의 변화를 보였다.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.116-121
• /
• 2009

Thermosonic flip chip bonding is an important technology for the electronic packaging due to its simplicity, cost effectiveness and clean and dry process. Mechanical properties of the horn and the shank, such as the natural frequency and the amplitude, have a great effect on the bonding capability of the transverse flip chip bonding system. In this research, two kinds of study are performed. The first is the new design of the clamp and the second is the effect of tolerance parameters to the performance of the system. The clamp with a bent shape is newly designed to hold the nodal point of the flip chip. The second is the effect of the design parameters on the vibration amplitude and planarity at the end of the shank. The variation of the tolerance parameters changes the amplitude and the frequency of the vibration of the shank. They, in turn, have an effect on the quantity of the plastic deformation of the gold ball bump, which determined the quality of the flip chip bonding. The tolerance parameters that give the great effect on the amplitude of the shank are determined using Taguchi's method. Error of set-up angle, the length and diameter of horn and error of the length of the shank are determined to be the parameters that have peat effect on the amplitude of the system.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권3호
• /
• pp.133-138
• /
• 2005

This paper presents a characteristics of horizontal swing angle in V type suspension string sets for 765kV T/L. The design of V type suspension string set does not differ from that of general string set for general towers, but it prevents instabilities from swing motion by the horizontal angle and by the wind pressure. We were designed specially 6 conductor yoke, arcing horn and earth horn. And we were decided to 550mm for a distance of strings. We were carried out characteristics of horizontal swing test and movement of mass center test for V-string sets of 400kN single, 300kN double and 400kN double. This products will be used for 765kV T/L of 1 circuit in suspension towers.