• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.149-154
• /
• 2015

A new Phalaenopsis cultivar 'SM 333' was bred by Sangmiwon Orchid, Korea, which produces young plants through tissue culture techniques. The new cultivar 'SM 333', showing the phenotype of multiflora with pink color and small, multibranching-type characteristics, was derived from crossing between Phalaenopsis 'Odoriko' and 'Be Tris'. An elite individual number '02-03-33' later termed 'SM 333' was selected among about 300 individual progenies, based on an intensive selection process covering vegetative and flowering distinctiveness over more than 2 years. In year 2004-2005, the 1st and 2nd characteristic analyses were carried out through performance and uniformity tests. 'SM 333' shows flower color that is bright clean pink (RHS # RP69D) and flower shape that is formal type with 5.0 and 5.8 cm in flower height and width, respectively. 'SM 333' is regarded as raceme flower type suitable for the small casual flower market. The leaves of 'SM 333' grow horizontally and about 20.8 cm in length and 6.5 cm in width. This cultivar also possesses no genetic variation, and is amenable to fast in vitro propagation and easy growth due to its vigorous growth habit. This 'SM333' was registered (Reg. # 2916) with Korea Seed & Variety Service (KSVS) on 1st December, 2009, and the plant breeder's right is currently controlled by Sangmiwon Orchid Company, Korea.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.213-219
• /
• 1995

The author carried out an experiment to find out the response of Black porgy, Acanthopagrus schlegelii [Bleeker] to the color lights. The experimental tank ($360L{\times}50W{\times}55H$cm) was set up in a dark room. Six longitudinal sections with 60cm intervals are marked in the tank to observe the location of the fish. Water depth in the tank was kept 50cm level. Light bulbs of 20 W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and they were placed in front of the light bulbs to make different colors of light. Light intensity was controlled by use of auxiliary filters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 50 minutes before they were employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in order of blue, yellow, white and red in the day-time and blue, red, yellow and white at night. The difference of the average distribution on two different colors of light was 7.18%(0.35-19.55%), and the difference in the daytime(8.20%) was larger than at night (6.15%). The gathering rate of fish on illumination period didn't show the regular trend of increase and decrease, and was fluctuated with instability. The difference of the gathering rate on two different colors of light wasn't distinct, and the difference in the daytime was larger than at night.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.7-15
• /
• 2005

The purpose of this study was to compare the sealing ability of root canal obturation with or without the use of dentin adhesive system. Forty extracted human teeth with one canal were selected and decoronated. The teeth were divided into two Groups. The obturation procedure of Group 1 was the same as that of Group 2 with the exception of dentin adhesive system. Group 2 were obturated with dentin adhesive system, AH-26, and gutta-percha. After obturation, the teeth were immersed in methylene blue solution for 84 hours. The teeth were sectioned horizontally at 1.5 mm (Level 1), 2.0 mm (Level 2) 2.5 mm (Level 3) from the root apex using a low speed microtome. Distance of dye-penetrated surface and total dentinal surface were measured using SigmaScan Pro 5.0, and the ratio of dye-penetrated distance to the total dentinal distance was analyzed statistically by Mann-Whitney U-test. 1. In both groups, the mean leakage ratio was decreased cervically. 2. At level 1, there was no significant difference between group 1 and group 2 (p > 0.05). 3. At level 2 and 3, group 1 showed significantly higher mean leakage ratio than group 2 (p < 0.05). The results suggest that using dentin adhesive system in root canal obturation procedure reduces the apical microleakage.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2005

The aim of this study was to evaluate the effectiveness of sealer placement in simulated root canal extensions. Forty resin blocks were attained from the Endo-training Bloc. In each block. The simulated root canal was made with $\#20$, 80taper GT file. After each block was longitudinally split into two halves, a standardized groove was prepared on one canal wall of two halves to simulate the canal extensions with various irregularities. The two halves of each block were assembled and all simulated root canals were obturated by single cone method with AH26 sealer. Four different methods of sealer placement were used: group A, $\#20$ K-file; group B, ultrasonic file; group C, lentulo spiral; group D, EZ-Fill bi-directional spiral. All obturated blocks were stored in $100\%$ humidity at $37^{\circ}C$ for 1 week, Using a low speed saw, each block was sectioned horizontally. Images of the sections were taken using a stereomicroscope at $\times$ 30 magnification and a digital camera. The amount of the sealer in the groove was evaluated using a scoring system, a higher score indicated better sealing effectiveness. The data was statistically analysed by Fisher's Exact Test. The sealing score was the lowest, specially at the middle area of canal extensions in group A, and that was statistically significant difference from other groups. In conclusion, the ultrasonic file, lentulo spiral and EZ-Fill bi-directional spiral were effective methods of sealer placement in simulated canal extensions. The K file was the least effective method, specially at the middle area of canal extensions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.29-42
• /
• 2017

Jeongeuihyanggyo(旌義鄕校) is a kind of traditional, Confucian cultural landscapes that is located in Jeju special self-governing province. Its historical background illustrates that the first erection was started at Goseong-li of Seongsan-eup(城山邑 古城里) at Taejong(太宗) of 16 years(1417) and it moved to the west gate of Hyunseong(縣城) at Heojong(憲宗) of 15 years,(1849) Joseon. The aim at this study is to reveal characters of these Confucian Spatial Composition and Order, which are valuable resources that can be created into the cultural contents. The results demonstrate the characters of the Confucian cultural landscape as followings; the changing process of new building and its relocation, the utilization of antique maps in location interpretation of Jeongeuihyanggyo, Confucian symbolic elements of it, the spatial compositions and layouts of its buildings, physical structures, main buildings and their characters, locational points of topographic profile, changes of axial line at Daeseongjeon(大成殿), the D/H ratio of its courts. This study can show that Jeongeuihyanggyo is a case for realizing the Confucian reformation to enhance Seongeup Hyun's education standard considering the locality of the site which is an isolated island like Jejudo(濟州島). The author can see that the example of Confucian space is applied to various layout techniques, both horizontally and vertically, in a limited space condition of being in the castle. Therefore, it is necessary to revive this point so that it can utilize unique Confucian cultural landscape possessed only by Jeongeuihyanggyo.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.5
• /
• pp.5-13
• /
• 2017

The sand layer deposited in clay is called a sand seam, which is formed by inflow of sands due to river flooding or slope failure in the middle of sinking and sediment of clay. When the sand seam exists in clay layer, the drainage direction changes from one way to both ways, and the time of consolidation may be reduced. However, it is not clearly proved due to lack of studies of sand seam and currently is not reflected in the design of soft soil improvement. As a fundamental study about sand seam, the oedometer tests and constant rate of strain tests with Rowe cell were conducted on clay specimens with sand seam. For tests, a frozen method was specially designed for making the sand seam. It was concluded that the test results showed the sand seam affects the coefficient of consolidation of clay. If the thickness of sand seam exceeds 0.05 times of specimen height, the sand seam works as drainage layer of pore water horizontally as well as vertically, and consequently the consolidation is accelerated.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.43-53
• /
• 2015

More than 70 percent of the Korean territory consists of mountain area so development of mountain district is essential to urbanize continuously. Thus, technological developments for risk factors and standards and manuals must be needed to prevent mountain disaster. Risk Management Manual should be made and operated in government legislation related to national disaster, but there is still no Emergency Management Standard Manual and Emergency Response-Practical Manual to prevent mountain disaster. This study suggests the improvement plans that are legislated but not established cleary in the field of disaster in urban area. The main items are like as 1) adaptable standard and practical manual to prevent mountain disaster in urban area, 2) reinforcement between managing department and interagency vertically and horizontally in central and local government organization, 3) Personal SOP (Standard Operating Procedure) not EOP (Emergency Operation Plan), 4) considering 13 items selected by Ministry of Public Safety and Security, 5) schematization with personal action plan, 6) check list to do in the event of mountain disaster, and 7) regular practice per quarter.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.301-310
• /
• 2018

The purpose of this study is to evaluate the compatibility of universal adhesives with two dual-cured resin cements. Eighty human molars were divided into eight groups. Tooth was embedded in self-curing acrylic resin and sectioned horizontally to exposure dentine surface. After polishing with 600-grit SiC paper, adhesives were applied. All-Bond Universal (Bisco), G-premio bond (GC), Scotch-bond universal (3M ESPE), Scotch-bond Multipurpose (3M ESPE) were used in this study. Calibra (Dentsply) as a conventional dual-curing resin cement and RelyX Ultimate (3M ESPE) as an amine free resin cement were used. The adhesives and the cements were applied according to the manufacturer's instructions. Final specimens were cylinder (diameter 2mm, height 3mm) shape. After storing in distilled water at $37^{\circ}C$ for 7 days the shear bond strength (SBS) test was performed. There was no significant difference in shear bond strength between the adhesives when RelyX Ultimate was used (p>0.05). However, when Calibra used with Scotch-bond Multipurpose and All-Bond Universal were used, statistically higher SBS was observed, as compared to the groups which Calibra cements with G-premio bond and Scotch-bond universal adhesive (p<0.05) were used. Within the limitations of this study, RelyX Ultimate resin cement was compatible with universal adhesives of various pH. All-Bond Universal adhesive was compatible with a resin cement containing the tertiary amine.

• Korean Journal of Family Social Work
• /
• no.43
• /
• pp.61-85
• /
• 2014

The aim of this study is to examine how labour transition of female householders is proceeded, and to identify mechanisms that cause them to be excluded from labor market. For this, thirteen lone mothers who have had labor experience in the market, while raising children were interviewed. This qualitative case study was proceeded by way of participants' interviews and questionnaires. Finding shows, impoverished lone mothers were horizontally moving incessantly on second labor market. As poverty worsens by years, poor lone mothers tend to be more dependant on the government's support and to transit downward to work-poor labor market. The unprivileged women were excluded from multi-dimentions: market structure, social relations and gender norms. The sex-segmental and human capital-oriented market has excluded women who gave up their career for caring. Female breadwinners were frequently excluded from social relations and opportunities for labor due to their stigma. sometimes they were self-excluded from the market for they had to care for their children. In conclusion, suggestions are given to enhance qualities of lone mother's lives and help them exit from poverty. It is necessary to implement positive labor policy with labor flexibility and stability and to practice socialization of care as care support system is very important for maintaining their jobs. Above all, social awareness of gender role must be changed.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2020

The acquisition and processing of long-offset data are essential for imaging deep geological structures in marine seismic surveys. It is challenging to derive an accurate subsurface image by employing conventional data processing to long-offset data owing to the normal moveout (NMO) stretch and non-hyperbolic moveout phenomena induced by seismic anisotropy. In 2017, the Korea Institute of Geoscience and Mineral Resources conducted a simultaneous two-dimensional multichannel streamer and ocean-bottom seismic survey using a 5.7-km streamer and an ocean-bottom seismometer to identify the deep geological structure of the Ulleung Basin. Herein, the actual geological subsurface structure was obtained via the sequential iterative updating of the velocity and anisotropic parameters of the long-offset data obtained using a multichannel streamer, and anisotropic prestack Kirchhoff migration was performed using the updated velocity and anisotropic parameters as input parameters. As a result, the reflection energy in the long-offset traces, which showed non-hyperbolic moveout owing to seismic anisotropy, was well aligned horizontally and NMO stretches were also reduced. Thus, a more precise and accurate migrated image was obtained, minimizing the distortion of reflectors and mispositioned reflection energy.