• 제목/요약/키워드: Horizontal section

검색결과 670건 처리시간 0.028초

전통한지 표면 및 단면의 현미경적 관찰 (Microscopic Observation of Surface and Cross Section of Korean Traditional Paper-Hanji)

  • 윤승락
    • 펄프종이기술
    • /
    • 제47권6호
    • /
    • pp.49-56
    • /
    • 2015
  • To investigate fiber orientation of Korean traditional paper, Hanji, the fiber arrangements on the surface and cross section of Hanji were observed by scanning electron microscope (SEM). The surface observation showed that the fibers of traditional paper were arranged in vertical and horizontal directions, and those of ssangbal sheet forming were arranged more in vertical direction. The fibers of machine made Hanji and copying paper were usually arranged in vertical direction. As for the observation of cross section of traditional paper, fibers arranged in horizontal direction tended to be increased with the increase of thicknesses. The thick traditional paper have cracks in the middle part of structural section of paper. They were larger in cross section in horizontal direction than in vertical direction. The horizontal arrangement of traditional paper seemed to be about 8% to 14% higher to the vertical arrangement, which is very lower to other papers.

원곡선구간에 종곡선 설치 가능한 곡선반경에 관한 연구 (A Study of Allowable Vertical Curve Radius on Horizontal Curved Section)

  • 이기승
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 춘계학술대회 논문집
    • /
    • pp.309-314
    • /
    • 2003
  • A vertical curve should be installed in straight section. In case, it be installed on horizontal curved section, safety factor go down. In this study, it is calculated that the deficiency of cant about vertical curve radius on horizontal curved section. The result of this study will be used on planning the tack layout of railroad and design the track construction.

  • PDF

Chemical Coupling between Horizontal Cells in the Catfish Retina

  • Lee, Sung-Jong;Jung, Chang-Sub;Bai, Sun-Ho
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제2권1호
    • /
    • pp.21-30
    • /
    • 1998
  • The effects of GABA and glutamate on the horizontal cells were explored by an intracellular recording method to discern the mechanisms of receptive field formation by chemical coupling in the catfish outer retina. The results suggest that the horizontal cells of the catfish retina might use GABA as their transmitters and that the GABAergic system contributes to the formation of receptive fields of the horizontal cells. GABAC receptors may be involved in a chemical coupling between horizontal cells and concerned with the depolarizing actions by GABA on horizontal cells in the catfish retina. Since the chloride equilibrium potential is more positive than the dark membrane potential in horizontal cells, GABA released from a horizontal cell may depolarize the neighboring horizontal cells. Thus a chemical coupling between horizontal cells may be formed. $GABA_A$ receptors also may be involved in the negative feedback mechanism between photoreceptor and horizontal cell. And glutamate may be involved in connecting positive and negative feedback systems since it potentiated the GABA's actions. Therefore, it is presumed that large receptive fields in the catfish retina are formed not only by electrical coupling but also by chemical coupling between horizontal cells. And information travels laterally by pathways involving both electrical coupling composed of gap junctions and chemical coupling in the retinal network.

  • PDF

단일 채널 해양 탄성파탐사 자료의 수평거리 보정 (Horizontal Distance Correction of Single Channel Marine Seismic Data)

  • 김현도;김진후
    • 지구물리와물리탐사
    • /
    • 제7권4호
    • /
    • pp.245-250
    • /
    • 2004
  • 단일 채널 해양 탄성파탐사 자료의 2차원 탄성파 단면도에 수평거리 보정을 적용하여 탄성파 단면도의 수평축을 거리 단위로 표현하였다. 수평축을 거리 단위로 표시함으로써 탐사선의 운항 속력이 변할 경우 나타나는 수평 거리 왜곡 현상을 상당히 해소할 수 있었다. 수평거리 보정을 위하여 탄성파 자료의 각 트레이스에 저장된 GPS 위치 정보와 자료 취합 윈도우를 이용하였다. 자료 취합 윈도우의 최소 길이는 탐사선의 속력과 발파 간격에 의해 결정하였으며, 최대 길이는 1차 프레넬대 반경을 이용하여 결정하였다. 자료 취합 윈도우의 길이를 결정함에 있어 수평 해상도와 중합의 효과를 동시에 고려하였다. 수평거리 보정 과정을 적용하여 실제 지층구조와 유사하다고 생각되는 2차원 탄성파 단면도를 작성할 수 있었다.

철근콘크리트 코오벨 부재의 구조성능 평가 및 내력 추정 (Evaluation of Structural Performance on Corbel in the Reinforced Concrete)

  • 조승호;박태원;우성식;정란;박현수;김동백
    • 한국안전학회지
    • /
    • 제23권3호
    • /
    • pp.58-64
    • /
    • 2008
  • In order to identify the exact behavior of corbel section, the horizontal force acting on corbel section should be considered as well as the vertical force. In this study, a new corbel section, which is economical and easy to construct, is developed by evaluating the exact strength of the section. Experiments were performed to verify the strengths of the proposed sections comparing with those of the currently used section. The summary of the experiment results are as follows: 1) In order to minimize the horizontal force effect, it was found that the use of pre-stressing was most effective, and that TB type corbel section is a most efficient section in terms of economy and workability. 2) The experimentally obtained strength of corbel section matched well with that estimated using shear friction theory. Therefore, it is concluded that shear friction theory would be very useful if a precise crack angie in the corbel section, which is pre-stressed by PS strings and threaded bolts, is available.

The $GABA_c$ Receptor Is Present in Isolated Cone-Horizontal Cell Axon Terminals From Catfish Retina

  • Jung, Chang-Sub;Lee, Sung-Jong;Paik, Sun-Sook;Bai, Sun-Ho
    • 한국생물물리학회:학술대회논문집
    • /
    • 한국생물물리학회 1998년도 학술발표회
    • /
    • pp.35-35
    • /
    • 1998
  • Catfish retina contains cone- and rod-horizontal cells. Only the cone-horizontal cell (cone-HC) has an axon and axon terminal. We compared the distribution of excitatory and inhibitory receptors in axon terminals and somata to begin to learn about the distinct functions of these two structures.(omitted)

  • PDF

수평 T형 증발관내 2상류의 유량분배 및 압력강하 특성 (Characteristics of T-phase flow distribution and pressure drop in a horizontal T-type evaporator tube)

  • 박종훈;조금남;조홍기
    • 설비공학논문집
    • /
    • 제11권5호
    • /
    • pp.658-668
    • /
    • 1999
  • The objective of the present study is to investigate the effect of experimental parameters on the hydrodynamic characteristics in a horizontal tee-type evaporator using R-22. The experimental apparatus consisted of an unheated tee-type test section, a liquid-vapor separator, a preheated, mass flow meters, a plate heat exchanger, pump, and other measurement devices. The experimental parameters were mass flux(500 and 600kg/$m^2$s), inlet quality(0.1~0.3) and separation ratio(0.3~0.7). Absolute pressure at the inlet of the test section was 0.652 MPa. The branch-to-inlet inner diameter ratio was 0.61. Pressure gradient at the branch section was larger than that at the run section at the same separation ratio. Pressure drop per unit length increased at the run section and decreased at the branch section as the separation ratio increased. Pressure drop predicted by the separated flow model agreed with experimental data within -35 to +16%. Generally, predicted values showed similar trend with the data. Mass flow ratio of vapor refrigerant was affected by the inlet quality more than the mass flux.

  • PDF

모바일 레이저 스캐닝 데이터를 이용한 도로선형 및 횡단면 추출에 관한 연구 (A Study on the Extraction of Horizontal Alignment and Cross-Section of Roads using Mobile Laser Scanning Data)

  • 김세근;이현용;주영은
    • 한국지리정보학회지
    • /
    • 제9권3호
    • /
    • pp.207-218
    • /
    • 2006
  • 도로교통 안전진단에 있어 도로의 형상분류를 통한 도로 선형 및 횡단면 데이터의 추출은 매우 중요한 작업이다. 기존의 조사원에 의한 도로안전진단은 많은 시간과 비용이 요구되는 반면 도로안전진단을 위한 다양한 정보를 제공하지 못한다는 단점이 있다. 따라서, 레이저 스캐닝 장치를 장착한 차량측량시스템을 이용, 수치사진측량시스템 기술을 활용하여 자동으로 도로형상을 분류하고, 도로 선형 및 횡단면 데이터를 추출하는 방안이 필요하다. 본 논문에서는 이를 위해 모바일 레이저 스캐닝 데이터를 취득하여 처리하고, 이를 통해 도로 선형 및 횡단면 데이터를 추출할 수 있는 방안을 제시하고, GPS-VAN 을 이용 취득된 모바일 레이저 스캐닝 데이터를 처리, 도로 선형 및 횡단면 데이터를 추출하는 연구를 진행하였다.

  • PDF

ANALYTIC APPROACH FOR THE STUDY OF AIR AND/OR LIQUID FILLED GEOMEMBRANE TUBE SECTIONS ON A HORIZONTAL

  • Choi, Yoon-Rak
    • Journal of the Korean Society for Industrial and Applied Mathematics
    • /
    • 제17권3호
    • /
    • pp.181-195
    • /
    • 2013
  • This study considers an air and liquid-filled geomembrane tube section resting on a horizontal foundation. All quantities are normalized to obtain geometrically similar solutions in the static equilibrium condition. Analytic solutions are expressed in closed form. The solution for the air or liquid-filled tube section is derived systematically as an extreme case of the air and liquid-filled tube section. The validity of these solutions is confirmed by comparing to previous study, and some results are shown for the characteristic parameters and shapes of air and/or liquid-filled cases. Using the result of present study, one can estimate the shape and characteristic parameters of a tube section without numerical integrations or iterations.

Horizontal ridge augmentation with porcine bone-derived grafting material: a long-term retrospective clinical study with more than 5 years of follow-up

  • Jin-Won Choi;Soo-Shin Hwang;Pil-Young Yun;Young-Kyun Kim
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제49권6호
    • /
    • pp.324-331
    • /
    • 2023
  • Objectives: The purpose of this study was to evaluate the outcomes of implants placed in horizontally augmented alveolar ridges using porcine bone grafts and to investigate the long-term stability of the porcine bone grafts. Materials and Methods: A retrospective analysis was conducted on 49 sites that underwent horizontal ridge augmentation using porcine bone grafts and implant placement with a follow-up period longer than 5 years. Furthermore, additional analysis was conducted on 24 sites where porcine bone grafts were used exclusively for horizontal ridge augmentation and implant placement. Results: The mean follow-up period after prosthesis loading was 67.5 months, with a mean marginal bone loss of 0.23 mm at 1 year and a cumulative mean marginal bone loss of 0.40 mm over the entire follow-up period. Of the 49 implants, 2 were lost and 3 did not meet the success criteria, resulting in a survival rate of 95.9% and a success rate of 89.8%. In 24 sites, the mean marginal bone loss was 0.23 mm at 1 year and 0.41 mm at 65.8 months, with 100% survival and success rates. Conclusion: Porcine bone grafts can be successfully used in horizontal ridge augmentation for implant placement in cases of ridges with insufficient horizontal width.