• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.8-15
• /
• 2012

Posterior shoulder muscle tightness is frequently observed in shoulder impingement syndrome because tightness in the posterior portion of the shoulder muscles can cause anterior and superior translation of the humeral head in relation to the glenoid fossa. The purpose of this study was to determine the immediate effects of soft tissue massage on acromiohumeral distance (AHD), anterior translation of the humeral head, and glenohumeral (GH) range of motion (ROM) in subjects with posterior shoulder muscle tightness. Twenty-seven subjects with greater than $10^{\circ}$ difference in the range of GH horizontal adduction between right and left sides were recruited. The range of GH horizontal adduction and internal rotation were measured by a digital inclinometer. The AHD and anterior translation of the humeral head were measured using ultrasonography. A paired t-test was used to compare AHD, anterior translation of the humeral head, and the range of GH horizontal adduction and internal rotation before and after soft tissue massage. The results showed that AHD increased significantly (p<.05) and the anterior translation of humeral head decreased slightly, but not significantly (p=.40) after the soft tissue massage. Furthermore, the ROM of horizontal adduction and internal rotation in the GH joint increased significantly after the soft tissue massage (p<.05). These findings indicate that soft tissue massage on posterior shoulder muscle tightness is an effective method to increase AHD and ROM in the horizontal adduction and internal rotation of the GH joint.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.66-80
• /
• 1997

This paper describes a newly developed arc-sensing algorithm of seam-tracking for FCA W (flux-cored arc welding) horizontal fillet welding. In this algorithm, arc current and the Weighted-Are-Current (WAC) are used to adjust the position of a weld torch in directions of bead throat and weaving, respectively. The WAC, which is newly devised in this study, means that arc current in the vicinity of weaving end is more emphasized than that in the center of weaving. The reason of this is because there usually exists much noise in the center of weaving due to abrupt change of arc length in case some empty gaps exist in a fillet joint Variance analysis was performed in order to check the effect of weld parameters on arc current and the WAC. As a result, the relationships between tip-to-workpiece distance and arc current, and between weaving offset and the WAC were established.To check "the validity of the algorithm, seam-tracking experiments were performed ;mder various welding condition. The result of experiments showed a satisfactory tracking performance in the presence of empty gaps in a horizontal fillet joint.et joint.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1886-1896
• /
• 2019

Modern small modular nuclear reactors can be built on a barge in ocean, therefore, their flow characteristics depend upon the ocean motions. In the present research, effect of rolling motion on flow and friction characteristics of laminar flow through vertical and horizontal narrow channels has been studied. A computer code has been developed using MPS method for two-dimensional Navier-Stokes equations with rolling motion force incorporated. Numerical results have been validated with the literature and have been found in good agreement. It has been found that the impact of rolling motions on flow characteristics weakens with increase in flow rate and fluid viscosity. For vertical narrow channels, the time averaged friction coefficient for vertical channels differed from steady friction coefficient. Furthermore, increasing the horizontal distance from rolling pivot enhanced the flow fluctuations but these stayed relatively unaffected by change in vertical distance of channel from the rolling axis. For horizontal narrow channels, the flow fluctuations were found to be sinusoidal in nature and their magnitude was found to be dependent mainly upon gravity fluctuations caused by rolling.

• 대한임상전기생리학회지
• /
• 제2권1호
• /
• pp.71-82
• /
• 2004

To compare the effectiveness of the hemisling, bobath sling, extension-type sling, and the newly designed Modified Triangular Bobath Sling with Distal Support on a hemiplegic shoulder subluxation. Fourteen hemiplegic patients with shoulder subluxation were evaluated by a simple X-ray with and without the slings and the vertical and horizontal distances on the plain AP views were measurement. The newly designed arm sling was compared in terms of the effects of correction with distal support attached with shoulder saddle sling. The arm sling designed for this study was developed for the purpose of maintaining patients hands in a functional position and performing ROM exercise of the shoulder easily, and prevention or correction to shoulder subluxation. The mean values of the vertical and horizontal distance were compared to determine if there was significant difference of function between the new sling and the conventional slings. The new sling provided the patients with good vertical correction of the subluxation(p<0.05) but did not increase the horizontal distance significantly. These results support the effectiveness of a new sling to decrease subluxation in hemiplegia. Further study on the long term effects or complication of the new sling is recommended.

• Agribusiness and Information Management
• /
• 제6권1호
• /
• pp.37-44
• /
• 2014

This study was conducted to evaluate light intensity and uniformity of two SMD (surface-mount device) type LEDs for protected crop production. A low-power (0.1 W) and a high-power (1 W) LEDs were selected and the intensity and uniformity was evaluated at different vertical (height) and horizontal (distance) intervals. When the horizontal interval of the LED bar was fixed, the light intensity increased and the uniformity decreased as the height decreased. At the 30~40 cm heights, 20~30% of the area showed $200{\pm}20{\mu}molm^{-2}s^{-1}$. As the horizontal distance of the LED bars increased, while the uniformity increased as well, the light intensity decreased. At the distances of 6~10 cm, 17~23% of the area showed $200{\pm}20{\mu}molm^{-2}s^{-1}$. When the LED bars were added to the sides, the light intensity and uniformity were generally improved. Results showed that the light intensity and uniformity depended on the height and interval of the LED bulbs; therefore, optimum arrangement for the crops interested should be determined through experiments.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.105-111
• /
• 2005

It is essential to establish the suitable position for artificial maxillary anterior teeth, because of not only esthetics, phonetics, mastication, but also optimal position of artificial posterior teeth for the construction of functional and esthetic prostheses. Anatomic landmarks have been used in the arrangement of artificial teeth. Such as incisive papilla and palatal rugae are useful landmarks for positioning occlusal rim and upper anterior artificial teeth because they are relatively stable and to be identified on master cast. Therefore, if average distance between maxillary anterior teeth and landmarks in dentate subjects are measured and applied, appropriate position of occlusal rim can be initially established. In this study, to present a guide to the position of the occlusal rim for upper anterior teeth of edentulous patients, horizontal distance between anatomic landmarks were measured. Maxillary casts were made in 72 Korean dentate subjects. Horizontal distance between central incisor and incisive papilla, between incisive papilla and intercanine line, and between primary palatine rugae and gingival margin of canine were measured on each cast. The results of this study were as follows ; 1. The mean distance from the incisal edge of central incisor to the posterior border of incisive papilla was 12.1 mm (Male 12.2 mm, Female 11.9 mm). 2. The mean distance between posterior border of incisive papilla and intercanine line was 3.5 mm (Male 3.4 mm, Female 3.6 mm / Left 3.6 mm, Right 3.4 mm). 3. The mean distance from the palatal gingival margin of canine to the lateral border of primary palatine rugae was 2.4 mm (Male 2.4 mm, Female 2.4 mm / Left 2.4 mm, Right 2.3 mm). 4. On all measured items, there were no significant differencies in measured values between male and female, and between left and right sides. (P>0.05).

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.95-102
• /
• 2003

The purpose of this study was to show occlusion on the simple hinge articulator optionally mounted. Modelling of upper-lower jaw and simple hinge articulator were developed. This modelling of upper-lower jaw inserting wax bite was mounted imaginary on the modelling of simple hinge articulator by use of the computer simulation. From changes of THA(transverse horizontal axis)-incisor distance, Balkwill angle and THA deviation, eight types were mounted respectively. After removal of wax bite, upper-lower jaw position changing were compared with centric jaw relation. The results were as follows: 1. The change of THA-incisor distance had influence on mostly a vertical shift of upper jaw. 2. The change of Balkwill angle had influence on mostly a horizontal shift of upper jaw. 3. Inferior type in the THA deviations was the least shift of upper jaw. The above results suggest that the simple hinge articulator optionally mounted effect a shift of upper jaw.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.175-180
• /
• 1999

This paper presents the effective design of the change of average illuminance and the arrangement of lamps by changing the form of working area and adjusting the distance between the wall and light. This study is intended to simplify the complex calculation of illuminance through the development of application program. It's plan to study application programs that can attain the value of advanced uniformly-distributed illuminance and average illuminance by changing the distance between the horizontal/vertical wall and lamp and between the horizontal/vertical lamp and lamp.

• 산업공학
• /
• 제20권4호
• /
• pp.539-546
• /
• 2007

This study has been conducted on touch screen interface design for mobile devices. It was intended to measure user’s satisfaction on one-handed thumb input mobile devices. Recent studies proposed the optimal touch button size, but it is inappropriate for mobile devices. Therefore, this study was focused on four touch key factors-width, height, the horizontal and vertical distance between touch keys-as independent variables. The ANOVA results showed that the user satisfaction of four touch key factors was significantly affected by the thumb input. It also apparent that the interactions between four factors were significant. As a result, the horizontal and vertical distance as well as the width and height affected the satisfaction of users. In addition, this study suggested satisfaction models which represent the top 30%, 50%, 70% of user satisfaction measurement. The results of this study could be used to design touch keys that are able to enhance the usability on touch screen based mobile devices.