• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.157-172
• /
• 2013

This paper presented an investigation of macromolecular suspension in a grooved channel by using the dissipative particle dynamics (DPD) with finitely extensible non-linear elastic (FENE) bead spring chains model. Before studying the movement and evolution of macromolecules, the DPD method was first validated by modeling the simple fluid flow in the grooved channel. For both simple fluid flow and macromolecular suspension, the flow fields were analyzed in detail. It is found that the structure of the grooved channel with sudden contraction and expansion strongly affects the velocity distribution. As the width of the channel reduces, the horizontal velocity increases simultaneously. Vortices can also be found at the top and bottom corners behind the contraction section. For macromolecular suspension, the macromolecular chains influence velocity and density distribution rather than the temperature and pressure. Macromolecules tend to drag simple fluid particles, reducing the velocity with density and velocity fluctuations. Particle trajectories and evolution of macromolecular conformation were investigated. The structure of the grooved channel with sudden contraction and expansion significantly influence the evolution of macromolecular conformation, while macromolecules display adaptivity to adjust their own conformation and angle to suit the structure so as to pass the channel smoothly.

• 한국콘텐츠학회논문지
• /
• 제10권10호
• /
• pp.111-119
• /
• 2010

본 연구는 디지털 케이블방송과 IPTV와 같은 디지털 미디어 서비스의 메뉴 구조에 대한 시선추적 연구이다. 최근 디지털 미디어 서비스의 초기 메뉴 구조는 수평 구조 또는 수직 구조로 제공되고 있는데, 디지털 케이블의 사례와 IPTV의 사례를 볼 때 발전과정은 상이하나, 서비스의 구성이 유사하여 메뉴 타이틀 및 방향에 대한 실험을 통해 시사점을 얻을 수 있을 것이라 판단이 된다. 연구자는 연구주제로 사용자가 메뉴를 조작하면서 인지하는 메뉴 타이틀 인지 정도와 메뉴의 제공방향에 대한 시선 도달시간이 상이한지 확인하고, 논의하는 것으로 정하였다. 연구는 Vertical Type과 Horizontal Type으로 구분된 실험을 통해 각 9가지의 결과를 도출하는 것으로 초기 메뉴에서 선순위로 노출되는 실시간 방송의 경우 수직구조의 메뉴에서, 지상파 및 영화VOD와 같은 후순위 메뉴 서비스의 경우는 수평 구조에서 피험자의 시선이 빠르게 이동한 것을 확인하였다. 연구의 결과는 기존 미디어사업자들의 메뉴 구조진화를 간접적으로 설명하는 것으로 향후의 진화 방향을 설정할 때 실무적으로 도움이 되는 유용한 결과이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1195-1202
• /
• 2004

In this paper an experimental study was investigated for two-phase flow distribution in compact heat exchanger header. A test section was consisted of the horizontal bottom dividing header($\phi$: 5 mm, L: 80 mm) and 10 upward circular mini channels ($\phi$: 1.5 mm, L: 850 mm) using an acrylic tube. Three different types of tube intrusion depth were tested for the mass flux and inlet mass quality ranges of 50 - 200 kg/$m^2$s and 0.1 - 0.3, respectively. Air and water were used as the test fluids. The distribution of vapor and liquid is obtained by measurement of the total mass flow rate and the calculation of the quality. Two-phase flow pattern was observed, and pressure drop of each channel was measured. By adjusting the intrusion depth of each channel an uniform liquid flow distribution through the each channel was able to solve the mal-distribution problem.

• 설비공학논문집
• /
• 제7권3호
• /
• pp.461-472
• /
• 1995

The interaction of laminar mixed convection and surface radiation in a two-dimensional channel with an array of rectangular blocks is analyzed numerically. Three blocks are maintained at high temperature and the other bottom and top horizontal walls are insulated. Discrete ordinate method(DOM) is introduced to analyze the radiative heat transfer. The effects of the variations of Reynolds number and channel specifications on the heat transfer characteristics are investigated. The average Nusselt numbers along the block surfaces are correlated and presented in terms of Reynolds number and dimensionless geometric parameters such as the block spacing, height and channel spacing. For the conditions considered in this study, average Nusselt numbers along the block surfaces are strongly influenced by the channel spacing and Reynolds number but weakly influenced by the block spacing and block height.

• 한국해양학회지
• /
• 제30권2호
• /
• pp.116-124
• /
• 1995

PC기반의 디지털 탄성과 시스템에 다중채널 수진기(6채널)를 연결하여 천해져 탄 성과 반사법 자료를 취득하고 이를 P에서 전산처리하였다. 자료처리 내용은 전처리, 너울효과보정, 주파수필터링, 이득회수, 디콘볼루션, 종합, 구조보정, 단면도작성 등 이다. 이러한 다중채널 디지털 자료취득 및 처리를 거친 최종 단면을 종래의 아날로그 기록계의 단면과 비교해 본 결과 다중반사를 포함하는 잡음이 제거 혹은 억제되고 신 호는 강화되었으며 해상도 또한 향상되었다. 종래의 아날로그 탄성과 장비에 결합하여 사용하는 천해저 다중채널 디지털 탄성과 시스템 및 자료처리 소프트웨어는 경제성이 높고, 아날로그 시스템에 비해 현장작업이 용이하면서도 양질의 지질정보를 효율적으 로 획득하게 해준다.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.350-357
• /
• 2000

Experiments were performed by using PF-5060 and water to investigate the influence of an aspect ratio of a horizontal rectangular channel on the cooling characteristics from an in-line $6{\times}1$ array of discrete heat sources which were flush mounted on the top wall of the channel. The experimental parameters were aspect ratio of rectangular channel, heat flux of simulated VLSI chip, and channel Reynolds number. The chip surface temperatures decreased with the aspect ratio at the first and sixth rows, and decreased more rapidly at a high heat flux than at a low heat flux. The measured friction factors at each aspect ratio for both water and PF-5060 gave a good agreement with the values predicted by the modified Blasius equation within ${\pm}7%$. The Nusselt number increased as the aspect ratio decreased, but the increasing rate of Nusselt number reduced as the aspect ratio decreased. A 5:1 rectangular channel yields the most efficient cooling performance when the heat transfer and pressure drop in the test section were considered simultaneously.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.639-647
• /
• 2019

최근 전자장비의 소형화 및, 고밀도화가 되는 반도체 집적기술의 발달로 인해 칩과 모듈에서 발생되는 내부발열량을 외부로 적절히 방출시키기 위해서 열 제어시스템 적용에 대한 연구의 중요성을 인식하고 있다. 본 연구는 SST k-${\omega}$ 난류모델을 적용하여 4개의 블록이 부착한 수평채널내에서 열전달 및 압력강하 특성을 고찰하였다. CFD 해석시 적용한 매개변수는 블록 폭, 블록 높이, 열원 및 난류발생기 배치이고, 해석시 기본 경계조건은 채널 입구의 온도 및 유속은 300 K, 3.84 m/s, 열유속은 $358W/m^2$으로 하였다. 그 결과로 블록 폭비율(w/h)이 증가할수록 열전달성능이 감소하는 반면에 블록 높이비(h/w)이 증가할수록 열전달특성은 증가하는 경향을 나타내었으며, 열원의 크기배열은 낮은 열유속에서 높은 열유속으로 증가시킬수록 열원의 영향을 받아 열전달계수는 증가하는 경향을 나타냈고, 난류발생기는 채널 입구에 가까운 블록 1번 위치의 상단에 설치했을 경우가 4개의 가열블록 전체에 가장 영향을 크게 미치게 되고, 압력강하특성을 고려할 때 가장 적절한 위치로 선정할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제33권1호
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.

• Nuclear Engineering and Technology
• /
• 제24권2호
• /
• pp.130-140
• /
• 1992

동방향 성층이상유동에서의 직접적촉 응축현상을 일차원 모델인 RELAP5/MOD2와 /MOD3를 이용하여 해석하였으며, 해석결과를 Northwestern의 실험결과와 비교·검토하였다. 해석결과 RELAP5의 공유열전달 모델은 동방향 성층이상유동에서 응축율을 비교적 잘 예측하고 있다. 그러나 공유접촉면에 파형이 생기는 경우는 물경계두께 및 국부 열전달계수는 유사한 범위로 일치할분 현상을 예측하는데 상당한 차이가 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.626-629
• /
• 1997

In this study, position optimization of insulation rods and suspension rods in discharge electrode frame of electrostatic precipitator(EP) is performed using finite element analysis(FEA). The object of the optimization is to minimize the difference of altitudes in unevenly sagged horizontal structure and to regulate the size of materials within the allowable stress bounds. Uppermost horizontal channel of discharge electrode frame is highly stressed and uniformity of lowest horizontal angle depends on the position of rods. Ten types of frame are analyzed and one recommended model is presented.