• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.11
• /
• pp.985-990
• /
• 2002

The electrical breakdown characteristics of liquid nitrogen(LN$\sub$2/) were studied under simulated quenching conditions for application of HTS apparatus. The experimental results for various quenching condition revealed that the breakdown voltage of LN$\sub$2/ with bubble flow velocity and gap spacing. In the case, breakdown voltage decreases gradually with the bubble velocity. When it is bubble velocity from 0 to 1 $\ell$ /min, breakdown voltage rapidly decreases but decreases from 2 $\ell$/min to 10 $\ell$/min slowly. The breakdown voltage for vertical electrode arrangement is higher than that for horizontal electrode arrangement. Also, it did a electric field and potential distribution interpreting at the liquid nitrogen when the bubble existed. The plots of equipotential lines for three cases are also shown.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1022-1027
• /
• 2001

In this study, the train-induced vibration was measured at many locations at/around the actual service lines and the data base was constructed using the measurement results. The characteristics of train induced ground vibration was categorized and the empirical ground vibration estimating equations were developed. On the ground area (level grounds, embankments, cut sections), the vibration estimating equations were developed in terms of ground vibration level which was related with the distance from the source. Especially for the cut section areas, the vibration levels were expressed with the vibration receiving point expressed by the ratio of vertical distance to horizontal distance(V/H) from the source. As a result, when V/H is 0.96, the vibration estimating equation gives a minimum vibration level.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.261-268
• /
• 1999

The seismic performance of precast concrete panel structures tested previously has been evaluated in this paper. Hysteretic curves of test specimens are idealized to elasto-plastic curves to get reliable yielding and ultimate displacements. For the idealized curves, ductility and energy dissipation capacity of specimens have been evaluated using a few guide lines. In addition, the strength capacity of specimens is checked for the strength demand caused by the design earthquake load including overturning moment effects. The result shows while the strength of specimen with joint box for vertical continuity is little bit lower than that of specimen connected by welding, the ductility of the former is higher than that of the latter. The energy dissipation ratios of PC specimens are ranged from 83% to 96% of that of Re specimen and the average of those are shown 90%.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.4
• /
• pp.238-244
• /
• 2008

The west stone pagoda of Gameunsa temple site(National Treasure No. 112) has been seriously damaged by surface weathering, and conservation treatment is needed. In the second story body stone, vertical cracks developed parallel to the main compressional axis. The vertical cracks seem to grow much more with the compression. Chemical and biological weathering along the vertical cracks could have enhanced the crack growth. In the third story capstone, the surface cracks strike toward NE and NW directions, which are intersecting each other. In the eastern and southern parts of the third story capstone, lots of vertical cracks develop along the lines from the axial center to outer rim, whereas horizontal cracks are easily observed at the outer rim of the capstone. On the other hand, a few horizontal cracks develop in the western and northern parts of the third story capstone. This fact indicates that the compression along the vertical axis is not uniform in direction. The west stone pagoda leans toward the east and the south, so it is considered that compression by deviatoric stress prevailed at these directions.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.199-202
• /
• 2001

A current TV-OUT format is quite different from that of HDTY or PC monitor in encoding techniques. In other words, a conventional analog TV uses interlaced display while HDTV or PC monitor uses Non-interlaced / Progressive-scanned display. In order to encode image signals coming from devices that takes interlaced display format for progressive scanned display, a hardware logic in which scanning and interpolation algorithms are implemented is necessary. The ELA (Edge-Based Line Average) algorithm have been widely used because it provided good characteristics. In this study, the ADI(Adaptive De-interlacing Interpolation) algorithm using to improve the algorithm which shows low quality in vertical edge detections and low efficiency of horizontal edge lines. With the De-interlacing ASIC chip that converts the interlaced Digital YUV to De-interlaced Digital RGB is designed. The VHDL is used for chip design.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.297-302
• /
• 2009

In this paper, we propose advanced screen detector as a tool for selecting the object for tracking and estimating its distance from a screen using fuzzy logic in vision based pointing device. Our system classifies the line component of the input image into horizontal and vertical lines and applies the fuzzy rule to obtain the best line pair which constitute peripheral framework of the screen. The proposed system improves the detection ratio for detecting the screen in relative to the detector used in the previous works for hand-held type vision based pointing device. Also it allows to detect the screen even though a small part of it may be hidden behind other object.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.49.2-49.2
• /
• 2010

In order to understand the configuration of magnetic field producing a solar penumbral microjet that was recently discovered by Hinode, we performed a magnetohydrodynamic simulation reproducing a dynamic process of how that configuration is formed in a modeled solar penumbral region. A horizontal magnetic flux tube representing a penumbral filament is placed in a stratified atmosphere containing the background magnetic field that is directed in a relatively vertical direction. Between the flux tube and the background field there forms the intermediate region in which the magnetic field has a transitional configuration, and the simulation shows that in the intermediate region magnetic reconnection occurs to produce a clear jet- like structure as suggested by observations. The result that a continuous distribution of magnetic field in three-dimensional space gives birth to the intermediate region producing a jet presents a new view about the mechanism of a penumbral microjet, compared to a simplistic view that two field lines, one of which represents a penumbral filament and the other the background field, interact together to produce a jet. We also discuss the role of the intermediate region in protecting the structure of a penumbral filament subject to microjets.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.1
• /
• pp.84-93
• /
• 2011

Levee line mapping is critical to the protection of environments in river zones, the prevention of river flood and the development of river zones. Use of the remote sensing data such as LiDAR and aerial orthoimage is efficient for river mapping due to their accessibility and higher accuracy in horizontal and vertical direction. Airborne laser scanning (LiDAR) has been used for river zone mapping due to its ability to penetrate shallow water and its high vertical accuracy. Use of image source is also efficient for extraction of features by analysis of its image source. Therefore, aerial orthoimage also have been used for river zone mapping tasks due to its image source and its higher accuracy in horizontal direction. Due to these advantages, in this paper, research on three dimensional levee line mapping is implemented using LiDAR and aerial orthoimage separately. Accuracy measurement is implemented for both extracted lines generated by each data using the ground truths and statistical comparison is implemented between two measurement results. Statistical results show that the generated 3D levee line using LiDAR data has higher accuracy than the generated 3D levee line using aerial orthoimage in horizontal direction and vertical direction.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.201-204
• /
• 2006

In the side scan sonar method, use is made of the back-scattering, at low grazing angles of incidence to the seabed, of relatively high-frequency acoustic waves radiated in a fan-shaped beam from a transducer contained in a towed body. The fan beam is oriented so that the wider angle is in the vertical plane (scan range) and the narrower angle in the horizontal plane (beam width) with the axis of the beam normal to the ship track. The display of the returns is usually realized as a series of closely spaced intensity-modulated lines on a paper recorder or computer screen display. In this way a two-dimensional picture of the seabed is build up.