• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.317-326
• /
• 2011

The mental foramen and anterior loop of the mandibular canal are important landmarks for mandibular surgical procedures. The purpose of this study was to analyze the shape and position of the mental foramen and anterior loop of the mandibular canal on the computed tomography (CT) images, and apply the results clinically. CT images of 96 patients (33 male, 36 female, age range 17~43 years, mean $24.6{\pm}4.99$ years) were enrolled. The horizontal and vertical position of the mental foramen, as well as the distance from the root apices were measured. The distance of the anterior loop of the mandibular canal to the root apices, and the buccal angle were measured. The mental foramen was found mostly below the second premolar observed in 81 cases (46.0%), between the first and second premolars in 67 cases (38.0%), and between the second premolar and first molar in 19 cases (10.2%). The mean distance between the mental foramen and the lower border of the mandible was $12.20{\pm}1.77$ mm, the mean distance between the mental foramen and root apex was $5.16{\pm}0.98$ mm. The mean distance of the anterior loop of the mandibular canal was $5.80{\pm}2.00$ mm. The buccal angle measured at $47.7{\pm}9.07^{\circ}$. The distance between the root apex and mental foramen measured as $5.16{\pm}0.98$ mm on panoramic radiography, and $6.2{\pm}3.07$ mm on CT. The mean distance between the mental foramen and mandibular canal was $5.39{\pm}1.62$ mm. When performing surgical procedures such as installing dental implants, it is important to minimize surgical trauma, especially the risk of damage to the mental nerve. To optimize the surgical outcome, a careful assessment of the shape and position of the mental foramen and the anterior loop of the mandibular canal must be made. CT images are useful for finding such anatomic structures.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.126-140
• /
• 1977

Present studies were carried out for breeding cold resistant clones of Citrus, improving overwintering techniques of Citrus in Jeju island as well as other southern region, Result obtained were as follows 1. In the vinyl house covered with two sheets of straw mat, 12 indivuals were found as non-injury and 15 were slightly injured by leaf freeging test at $-9^{\circ}C$ for 2 hours treatment. 2. In the condition of vinyl house covered with straw mat and viny film mulching and heat-in by sun-light, the inside temperature of vinyl house were not lowered below $-3^{\circ}C$ and the ground temperatura in vinyl house keeps above $0^{\circ}C$ during winter though outdoor temperature were lower by $-15^{\circ}C$(Daejeon area). 3. The vinyl tunnel inside the vinyl house and vinyl film mulching on ground position showed greater effectiveness for preventing heat loss from house but there were no significant difference between the color of vinyl film covered the tunnel. 4. In the vertical distribution of maximum temperature in vinyl house, the upper space was slightly higher than the lower position at high temperature condition, while minimum temperature was distributed as higher as the middle position, ground surface and upper position in order at low temperature condition 5. In the horizontal distribution of temperature in vinyl house, ground and surface-temperature of north side was lower than the other sides, and citrus planted within 30cm from north side wall died by cold injury and in the other side near wall appeared slight symptom of cold injury. 6. The insulating trench ($30{\times}30{\times}30cm$) packed with straw bundle installed under north wall might be effective to prevent heat loss of ground temperature. 7. In cloudy and snowy day, the temperature difference between indoor and outdoor were less, and the indoor temperature were maintained highly during night due to the effect of prevention of heat loss. 8. The highest temperature in a day was observed at about P.M. 3 both inside and outside of vinyl house and the lowest temperature was observed at about A.M. 6. The difference between the highest and lowest temperature of indoor in a sunny day was $19^{\circ}C$, compared with $9^{\circ}C$ on a cloudy or snowy day in late November. Especially, lowering of temperature in a snowy day was so less that the curve of temperature change was comparatively constant, 9. If the effective methods of citrus cultivation in vinyl house with improved clone such as hardiness. semi-dwarf and spur type are applied, it might be possible to cultivate the citrus tree safely in Jeju island as well as other southern rejion and to magnity the cultivation of citrus tree.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.2
• /
• pp.112-117
• /
• 2008

Purpose: Double-bundle reconstruction of anterior cruciate ligament(ACL) has the advantage of restoring the isometry and original function of ACL. The purpose of this study is to evaluate the clinical results following double-bundle reconstruction of ACL using autogenous hamstring grafts through an accessory anteromedial portal. Materials and Methods: From January 2005 to July 2006, sixty patients(52 males, 8 females) underwent double-bundle ACL reconstruction using autogenous hamstring tendons..The mean age was 31.7 years($20{\sim}51$ years). The mean follow up period was 13.4 months($12{\sim}16$ months). We made a horizontal-oblique skin incision just medial to tibial tuberosity and harvested semitendinosus and gracilis tendon. Tibial tunnel for posterolateral bundle was made near its anatomical position. By modifying an anatomic reconstruction of ACL by Yasuda et al., we made a femoral tunnel for posterolateral bundle through accessory anteromedial portal. Tunnels for anteromedial bundle were made with conventional method. We reconstructed anteromedial bundle with semitendinosus tendon and posterolateral bundle with gracilis tendon. Clinical results at last follow up were evaluated by range of motion, extent of anterior displacement(KT-1000 arthrometer), pivot-shift test. Functional evaluation of clinical outcomes were evaluated by Lysholm score and modified Feagin Scoring System. Results: There was no limitation of motion of knee joint at last follow up. Mean side to side difference of anterior displacement of tibia by KT-1000 arthrometer was improved from 8.4 mm preoperatively to 1.7 mm postoperatively(p<0.05). Average Lysholm score was improved from 64.1 preoperatively to 92.2 postoperatively(p<0.05). In modified Feagin Scoring System, 90% of cases were rated as good or excellent. Conclusion: Double-bundle reconstruction of ACL using autogenous hamstring grafts through accessory anteromedial portal results in good clinical outcomes.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2015

The characteristics of frozen soils are one of most important factors for foundation design in cold region. The objective of this study is to evaluate the shear strength and stiffness of frozen soils according to the confining conditions during the freezing and shearing phase. A direct shear box is constructed for the frozen specimens and bender elements are mounted on the wall of the shear box to measure shear wave velocities. Specimens are prepared by mixing sand and silt with a silt fraction of 30% in weight and the degree of saturation of 10%, giving a relative density of 60% for all tests. The temperature of the specimens in the freezer is allowed to fall below -5℃, and then direct shear tests are performed. A series of vertical stresses are applied during the freezing and shearing phase. Shear stress, vertical displacement, and shear wave along the horizontal displacement are measured. Experimental results show that in all the tests, shear strength increases with increasing vertical stress applied during the freezing and shearing phases. The magnitude of the increase in shear strength with increasing vertical stress during shearing under fixed vertical stress in the frozen state is smaller than the magnitude of the increase in vertical stress during freezing and shearing. In addition, the change in shear wave velocities varies with the position of the bender elements. In the case of shear waves passing through the shear plane, the shear wave velocities decrease with increasing horizontal displacement. This study provides an evaluation of the properties of shear strength and stiffness of frozen soils under varied confining condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2013

This study focuses on a ship detection and tracking method using Frequency Modulated Continuous Wave (FMCW) radar used for horizontal surveillance. In general, FMCW radar can play an important role in maritime surveillance, because it has many advantages such as low warm-up time, low power consumption, and its all weather performance. In this paper, we introduce an effective method for data and signal processing of ship's detecting and tracking using the X-band radar. Ships information was extracted using an image-based processing method such as the land masking and morphological filtering with a threshold for a cycle data merged from raw data (spoke data). After that, ships was tracked using search-window that is ship's expected rectangle area in the next frame considering expected maximum speed (19 kts) and interval time (5 sec). By using this method, the tracking results for most of the moving object tracking was successful and those results were compared with AIS (Automatic Identification System) for ships position. Therefore, it can be said that the practical application of this detection and tracking method using FMCW radar improve the maritime safety as well as expand the surveillance coverage cost-effectively. Algorithm improvements are required for an enhancement of small ship detection and tracking technique in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.55-60
• /
• 2010

This study are carried out to an lab model tests to develop a construction method that solidifies high-water content cohesive soil by using filter type drain and vacuum pressure, and that stabilizes the ground by accelerating horizontal drain at incline or in tunnel. The calibration chamber was designed within length of 1.5m and height of 50cm, and a drainage hole for preconsolidation, a switchgear and a piezometer were installed at the bottom part of the chamber. Also, a settlement gage was installed at the top part so that it can measure the settlement by time. The calibration ground basis was made in a form of thin layer from kaolinite and bentonite in 9:1 ratio stirred at 130% water content condition. A filter type drain was installed at chamber center and a vacuum pressure of 0.8MPa was applied through a hose linked to the cap at the top part, then, the settlement was measured in every 1 hour interval. After experiment, the moisture contents were measured by position, then, verified the increase of solidity of the ground through a triaxial compression test on undisturbed profile. After 11 days from the effective date, it was observed that the settlement decreased by maximum 35mm and the water content ratio was reduced by 38% at most while the solidity of the ground increased by 5~8 times greater than before preconsolidation.

• The KIPS Transactions:PartB
• /
• v.18B no.6
• /
• pp.333-340
• /
• 2011

The Human-Computer Interaction(HCI) is a study of the method for interaction between human and computers that merges the ergonomics and the information technology. The intelligent space, which is a part of the HCI, is an important area to provide effective user interface for the disabled, who are alienated from the information-oriented society. In the intelligent space for the disabled, the method supporting information depends on types of disability. In this paper, we only support the hearing-impaired. It is material to the gaze direction detection method because it is very efficient information provide method to present information on gazing direction point, except for the information provide location perception method through directly contact with the hearing-impaired. We proposed the gaze direction detection method must be necessary in order to provide the residence life application to the hearing-impaired like this. The proposed method detects the region of the user from multi-view camera images, generates candidates for directions of gaze for horizontal and vertical from each camera, and calculates the gaze direction of the user through the comparison with the size of each candidate. In experimental results, the proposed method showed high detection rate with gaze direction and foot sensing rate with user's position, and showed the performance possibility of the scenario for the disabled.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.349-358
• /
• 1996

To extract or not to extract permanent teeth for the correction of malocclusion has been a great debate in the history of orthodontics, and there is a variety of analytic methods and criteria to aid in the diagnosis. Extraction formulas that has been presented are many analytic methods that depend on arch length discrepancy, dental prominence, and skeletal pattern of the each patients. Of these analysis, the most important diagnostic factor is patient's skeletal pattern. Because the behavior of the dentition is closely dependent upon the skeletal pattern of each patient, dentition must be arranged within that person's skeletal frame. EI(Extraction Index) is composed of CF, interincisal angle, and lip position. CF is made of ODI and APDI that differentiate vertical and horizontal component of the skeletal pattern. So, EI not only represents patient's skeletal pattern, but also takes facial appearance into consideration. This study was undertaken to investigate EI and related cephalometric variables on the cephalogram of Korean adolescents which consisted of 153 persons with normal occlusion, harmonious skeleton and pleasing face. The following conclusions were obtained. 1. The mean value of the ODI is $73.5^{\circ}$, APDI $82.5^{\circ}$, CF $156.3^{\circ}$ 2. The mean value of the interincisal angle is $123.6^{\circ}$ 3. The mean distance of upper lip to E-line is 0.0mm, lower lip to E-line is 1.4mm. 4. The mean value of the EI is $153.8^{\circ}$.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.192-203
• /
• 2007

Objective: The aim of this study was assessment of the relationship between airway space and facial morphology in Class III children with nasal obstruction. Methods: For this study, 100 Class III children (50 boys and 50 girls) were chosen. All subjects were refered to ENT, due to nasal obstruction. Airway space measurements and facial morphology measurements were measured on lateral cephalometric radiograph. Pearson correlation analysis was used to assess the relationship between airway space and facial morphology Results: Ramal height, SNA, SNB, PFH, FHR and facial plane angle were positively related to upper PAS, and sum of saddle angle, articular angle, and genial angle, SN-GoGn, Y-axis to SN and FMA negatively related to upper PAS. Genial angle, FMA were positively related to lower PAS, and articular angle, facial depth, PFH and FHR negatively related to lower PAS. PCBL, ramal height, Mn. body length, Mn. body length to ACBL, facial depth, facial length, PFH and AFH were positively related to tonsil size. Sum of saddle angle, articular angle, genial angle, facial length, AFH, FMA and LFH were positively related to tongue gap, and IMPA and overbite was negatively related to tongue gap. Upper PAS, related to size of adenoid tissue, was mainly related to posterior facial dimension following a vertical growth pattern of face and mandibular rotation. Lower PAS and tonsil size, related to anterior-posterior tongue base position, were significantly related to each other. Lower PAS was related to growth pattern of mandible, and tonsil size was related to size of mandible and horizontal growth pattern of face. Tongue gap was related to anterior facial dimension following a vertical growth pattern of face. Conclusion: Significant relationship exists between airway space and facial morphology.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.8-14
• /
• 2012

Improving the speed of image processing is in great demand according to spread of high quality visual media or massive image applications such as 3D TV or movies, AR(Augmented reality). SIMD computer attached to a host computer can accelerate various image processing and massive data operations. MAMS is a multi-access memory system which is, along with multiple processing elements(PEs), adequate for establishing a high performance pipelined SIMD machine. MAMS supports simultaneous access to pq data elements within a horizontal, a vertical, or a block subarray with a constant interval in an arbitrary position in an $M{\times}N$ array of data elements, where the number of memory modules(MMs), m, is a prime number greater than pq. MAMS-PP4 is the first realization of the MAMS architecture, which consists of four PEs in a single chip and five MMs. This paper presents implementation of image processing algorithms and performance analysis for MAMS-PP16 which consists of 16 PEs with 17 MMs in an extension or the prior work, MAMS-PP4. The newly designed MAMS-PP16 has a 64 bit instruction format and application specific instruction set. The author develops a simulator of the MAMS-PP16 system, which implemented algorithms can be executed on. Performance analysis has done with this simulator executing implemented algorithms of processing images. The result of performance analysis verifies consistent response of MAMS-PP16 through the pyramid operation in image processing algorithms comparing with a Pentium-based serial processor. Executing the pyramid operation in MAMS-PP16 results in consistent response of processing time while randomly response time in a serial processor.