• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.89-92
• /
• 2012

Wireless Mesh Network expanded the capability of the conventional wireless networking by allowing the nodes to operate in proactive mode, reactive mode or the combination of both, the hybrid mode in the multi-hopping nature. By doing so, the links between the nodes become much more robust and reliable because of the number of paths to reach a destination node from a source node can be more than 1 and do not need to rely on the access point (AP) alone to relay the messages. As there may be many possible ways to form an end-to-end link between 2 nodes, the routing security becomes another main concern of the 802.11s protocol. Besides its reliance on the 802.11i for the security measures, 802.11s also includes some new features such as the Mesh Temporal Key (MTK) and the Simultaneous Authentication of Equals (SAE). The authentication and key management (AKM) process of 802.11s were observed in this paper.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.607-608
• /
• 2006

A CMOS phase-locked loop (PLL) which synthesizes frequencies between $6.336{\sim}8.976GHz$ in steps of 528MHz and settles in approximately 150ns using the 528MHz reference clock is presented. Frequency hopping between the bands in the each mode is critical point to design the PLL in multi-band orthogonal frequency division multiplexing (OFDM) because frequency switching between each band is less than 9.5ns. To achieve the fast loop settling, integer-N PLL that operates with the high reference frequency to meet the settling requirement is implemented. Two PLLs that operate at 9GHz and 528MHz is integrated and shows the band hopping lower than 1ns.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1649-1656
• /
• 2010

Internal reorganization energy due to the structural relaxation in hole or electron hopping mechanism is one of the measurements of key indices in designing an organic thin film transistor (OTFT) for flexible display devices. In this study, the reorganization energies of dicyanoanthracenes for the hole and electron transfer were estimated by adiabatic potential energy surface and normal mode analysis method in order to examine the effect on the energies for the positional variation of the cyano substituents in the anthracene as a protocol of acenes to design an organic field effect transistor. The reorganization energy for the hole transfer was reduced considerably upon cyanation of anthracene, especially at the 9,10-positions of anthracene, and the origin of the reduction was interpreted in terms of understanding the coupling of vibrational modes to the hole transfer.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.4
• /
• pp.81-87
• /
• 2016

Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.24-29
• /
• 1993

The 607 nm GaInP/AlInP distributed bragg reflector (DBR) lasers using the second order gratings period of 184.7 nm were fabricated by gas source molecular beam epitaxy (GSMBE) and the conventional holographic method. GaInP/AlInP DBR lasers show single mode operations up to 1.8 times the threshold currents with a wavelength of 607 nm at 140 K and a wavelength shift of 0.033 nm/K is observed. No mode hopping was found in the temperature ranging from 120 to 165K.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.63-70
• /
• 2005

LINK16 is a system which is designed to maximize performance in a particular tactical environment with high levels of jamming. In this paper, transmission performance of synchronization pattern for cipher communication in aerial tactical communication link is presented. Transmission architecture of operating mode (standard DP, P2SP, P2DP, P4mode) in LINK16 network is discussed, and an effect of synchronization pattern, a quality of degraded effect of transmission communication for collision probability between hopping frequencies and fading channel in crypto communication is analyzed.

• The KIPS Transactions:PartC
• /
• v.13C no.6 s.109
• /
• pp.677-684
• /
• 2006

This paper investigates the link margin of MB-OFDM UWB system quantitatively. Various simulations are performed considering the implementation loss by imperfect synchronization unit and the effect of multi-path fading channels. MB-OFDM UWB system uses ZP(Zero Padding) instead of CP(Cyclic Prefix) and supports two transmission modes; one is TFI(Time Frequency Interleaving) mode that transmits OFDM symbols using different carrier frequency from symbol to symbol according to Time Frequency(TF) codes, the other is FFI(Fixed Frequency Interleaving) mode that transmits OFDM symbols using a specific carrier frequency. The advantage of if and TFI is to be able to increase the transmitting power effectively compared to the existed OFDM systems that transmit the signal continuously at the same average transmitting power. From the analysis results of Ink margin, to guarantee the service range of 4m in 200Mbps mode, TFI mode must necessarily be implemented and the service range of 480Mbps mode is estimated about 1-2m in the line-of-sight multi-path channel (CMI).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.839-847
• /
• 2000

This paper presents modal analysis and mean conveying velocity (M.C.V.) control of bowl parts feeder activated by piezoactuators. Bowl parts feeders are being widely used in many industry fields for automatic assembly line. In general, the electromagnet has been and being used as exciting actuator of these vibratory bowl feeders. However, because of complexity of its mechanism and limited capability of the electromagnet actuator, there exist various impending problems such as severe noise, nonlinear motion of parts, passive characteristics and so forth. As one of solutions for these problems, piezoelectric actuators as new actuating technology have been proposed recently to excite the bowl parts feeder. In this paper, modal analysis of the proposed model has been performed to examine the modal characteristics of the model by using commercial FEM software and modeling with respects to MCV is constructed. Finally, MCV of the parts is to be controlled to track the desired one with PID controller.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.7
• /
• pp.33-40
• /
• 2015

The time slot assignment problem (TSAP) or Satellite Communications scheduling problem (SCSP) for a satellite performs $n{\times}n$ ground station data traffic switching has been known NP-hard problem. This paper suggests $O(n^2)$ time complexity algorithm for TSAP of a satellite that performs $n^2{\times}n^2$ ground station data traffic switching. This problem is more difficult than $n{\times}n$ TSAP as NP-hard problem. Firstly, we compute the average traffic for n-transponder's basic coverage zone and applies ground station exchange method that swap the ground stations until all of the transponders have a average value as possible. Nextly, we transform the D matrix to $D_{LB}$ traffic matrix that sum of rows and columns all of transponders have LB. Finally, we select the maximum traffic of row and column in $D_{LB}$, then decide the duration of kth switch mode to minimum traffic from selected values. The proposed algorithm can be get the optimal solution for experimental data.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.156-165
• /
• 2023

IEEE 802.15.4e-TSCH is recognized as a wireless industrial sensor network standard used in IoT systems. To ensure both power savings and reliable communications, the TSCH standard uses techniques including channel hopping and bandwidth reserve. In TSCH mode, scheduling is crucial because it allows sensor nodes to select when data should be delivered or received. Because a wide range of applications may necessitate energy economy and transmission dependability, we present a distributed approach that uses a cluster tree topology to forecast scheduling requirements for the following slotframe, concentrating on the Poisson model. The proposed Optimized Minimal Scheduling Function (OMSF) is interested in the details of the scheduling time intervals, something that was not supported by the Minimal Scheduling Function (MSF) proposed by the 6TSCH group. Our contribution helps to deduce the number of cells needed in the following slotframe by reducing the number of negotiation operations between the pairs of nodes in each cluster to settle on a schedule. As a result, the cluster tree network's error rate, traffic load, latency, and queue size have all decreased.