• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.160-165
• /
• 2016

The rapidly developing applications of optical fiber in sensors, sensor system and super high speed optical communication have begun to produce tangible demands for optical coupler and connected WDM. we have designed and made Hopper type WDM (national patent NO:10-1502954). The Hopper type WDM is bi-directional $1{\times}3$ WDM of asymmetry Butt coupling for super high speed optical communication. The Hopper type WDM is used central wavelength of each 850nm,1300nm,1550nm. The Hopper type WDM has an excellent merits which the existing WDM and also it has an excellent signal of super high speed and economic in made. The characteristic of Hopper type WDM is superior in ave 0.02-0.03dB as compared with $1{\times}3$ optical coupler to excess loss. Especially, we can expect the utilization of super high speed optical MUX and also can be developed as the high-sensibility signal detected system in using optical sensor system parts.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.179-185
• /
• 2008

The seeding rates of the vacuum suction nozzle seeders are affected by the jumping height of the seeds on the vibrating seed hopper. This study was performed to investigate the optimum vibration condition of the seed hopper on the vacuum suction nozzle seeder for improving seeding performance. Experiments were carried out to determine the vibration conditions of the seed hopper by air pressure and eccentric weight, and to optimize the seed-pickup performance of each nozzle by suction pressure. As the result with the experiments, the fluctuations of the jumping height of the seeds were showed at amplitude 0.4 mm and frequency 42 Hz, and jumping heights of the seeds were increased as the air pressure increase and the eccentric weight decrease, regardless number of seeds of the hopper. The best seeding rate of the seed hopper was 98% at the 300-seed cell, when the condition of the seed hopper was the suction air pressure of 94.6 kPa-abs., amplitude and frequency of the seed hopper vibration were at 0.57 mm and 43.6 Hz, respectively. The optimum vibrating conditions of the seed hopper were decided into frequency 43.6-43.8 Hz and the amplitudes 0.61-0.62 mm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.256-263
• /
• 2014

We have designed and made three kinds of FBG(Fiber Bragg Grating) Acoustic Transducer using Hopper type WDM on the use of recently developed FBG in Korea. The newly designed three kinds of FBG Acoustic Transducer using Hopper type WDM have an excellent merit of practical use with simple structure of sensors arm as well as the merit with existing fiber sensors. It was possible to detect sound waves in the range of 10 Hz to 18 kHz through the newly designed three kinds of FBG Acoustic Transducer and also, possible to detect its signal within the maximum range of 8.6 m by the use of most suitable resonance condition of the transducer. Especially, we can expect the utilization of low-frequency signal detection instead of existing acoustic sensor in the environment of electric noise and inferior condition. Furthermore, they can be developed as the high-sensibility and multi-point signal detection system through the sensor array system.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.203-214
• /
• 1997

Hydraulic dredgers(Hopper dredger) are the most important piece of equipment in the entire harbor engineering field, and most suitable for the removal of sand and weakly consloidated sediment such as silt. In maintenance dredging, specially confined harbor or congested passage area, Hopper dredger is user most popularly because less obstruction and danger to navigation than other mostly stationary dredgers. Investigation of the physical behave of dredged material disposal in coastal water from the Hopper dredger includes estimations of pattern as well as thickness of material on the bottom. Calculation based on vertical settling and horizontal advection of single particles ignore the effects of bulk properties of the disposed marterial, vertical and horizontal diffusion. and material dilution due to the entrainment of ambient water during descent. This paper focuses on the analysis of dredging and dumping characteristics and the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water. This model accounts the behavior of material after release from the hopper dredger. It is shown that the model describes the qualitative feature of prototype dumping process and its response.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.287-291
• /
• 2013

The low- frequency hydrophone sensor, using the recently developed FBG has an excellent merits which the existing fiber-optic sensor has and also it has an excellent signal sensing effect in the environment of low-frequency(30Hz-300Hz), not to be detected by the PZT sensor. we have the detection of frequency 19KHz right signals when was using more Hopper lenz WDM than $1{\times}3$ optical coupler. furthermore, we can expect the uitilization of low-frequency signal detection to be used for the military purpose and also it can be developed as the high-sensibility multiplexing through the sensor array system.

• Korean Institute of Interior Design Journal
• /
• v.16 no.6
• /
• pp.11-18
• /
• 2007

Edward Hopper is one of the great American artists in the 20th Century. In the field of art, it seems that his paintings are thoroughly analyzed In terms of human alienation and emotional aspects in various ways. However, in his numerous paintings, highly interesting spatial aspects can be found. Purpose of this study is to analyze some of his painting by the spatially analytical tools to examine how his space is experienced. The tools are: relationship between each space, relationship between light and space, and geometrical composition. Among many paintings by Hopper, four of the works that depicted interior spaces are selected and further case-studied in detail: ${\ulcorner}$Rooms by the Sea${\lrcorner}$ (1951), ${\ulcorner}$Sun in an Empty Room${\lrcorner}$ (1963), ${\ulcorner}$New York Movie${\lrcorner}$ (1939) and ${\ulcorner}$Automat${\lrcorner}$ (1927). An Environmental Simulation with scale models was used to examine the relation between light and space. After the research, some unique characteristics of his space were found. Even though his paintings seem to represent the everyday spaces, there are fascinating hidden structure to make people experience in a specific way that Hopper created. Spaces In his paintings do not communicate with each other but are constantly interrupted by the element of time. The mundane everyday world is rediscovered and recreated through these multidimensional and heterogeneous space.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.12-19
• /
• 2009

The characteristics of light in the paintings of Rembrandt van Rijn, Johaness Vermeer and Edward Hopper are very different. While Rembrandt and Vermeer lived in the 17th century, Hopper lived in the 20th century. Although this time gap, comparative study on their light-space relationship is important because there are spatial similarities as well as light differences. Most three painters' works depict interior spaces with one person inside. The interior space is filled with different light and shadow. In the Rembrandt's paintings, only part of the figure is lit in the ambiguous darkness. In the Vermeer's paintings, the soft indirect light is filled in the domestic space and the boundary between the figure and space is blurred. In the Hopper's paintings, the direct sunlight invades the interior and the figure confronts with strong daylight. These light differences were caused by the artists' intentions as well as the environmental situations. 4 case paintings of each artist were analyzed by phenomenological aspects and computerized light brightness test. Scale models were built to re-construct the three different light characteristics. The model experimentation will have potential to develop 2 dimensional art analysis into 3 dimensional space design by means of light. However it was very difficult to construct the three lights, the experimentation shows they have unique characteristics that can be applied to spatial design studies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.613-618
• /
• 1999

This paper discuss the chemical, physical and mineral properties of classified fly ashes by electrostatic precipitator and calcinated fly ashes at 50$0^{\circ}C$. The electrostatic precipitator in coal fired power plant has a number of hopper in the direction of flue gases. The properties of fly ashes collected at each hopper in the electrostatic precipitator are different. Superfine, fine and ordinary fly ashes can be collected respectively at each hopper. The carbon content in fly ash is influenced on the viscosity of paste. By calcination, the carbon content in fly ash is decreased and the fluidity of paste is improved.

• Journal of Welding and Joining
• /
• v.18 no.1
• /
• pp.77-82
• /
• 2000

The aim of the present study is to investigate the characteristics of ultimate the fatigue strength of hopper knuckles in merchant vessels carrying bulk cargo or LNG/LPG/ The ultimate strength test is undertaken on the hopper knuckle model, subject to end tip load. A series of fatigue tests are carried out on the hopper knuckle models varying the level of the nominal stresses. The elasto-plastic finite element analysis is performed to examine the distribution of hot spot stresses near weld toe and also the progressive collapse behavior of the test model. S-N curves are developed based on the fatigue test results.