• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.495-506
• /
• 1996

Monodispersed colloidaly yttria(Y2O3) can be used in a variety of applications such as phosphors. IR transparent materials and fine ceramics. For preparing monodispersed yttria homogeneous precipitation has been regarded as a fovorable method that is monodispersed yttria can be obtained through calcining monodispersed colloidal compound of yttrium (eg:Y(OH)CO3.nH2O)which can be prepared by homogeneous precipitation with urea. It is however still required to find out the quantitative effects of important variables of precipitation such as concentration of yttrium and urea reaction temperature and initial pH of reactant even though homogeneous precipitation of Y3+ with urea has been studied extensively. Among the effects of these variables we investiga-ted 1) the effect of yttrium concentration on the shape and size of precipitate and the reation rate 2) range of yttrium concentration required to make monodispersed colloidal particles 3) the reason for limited concentra-tion range of yttrium and 4) the effect of ultrasonic radiation on the limited concentration.

• Journal of Information Display
• /
• 제1권1호
• /
• pp.35-41
• /
• 2000

Manganese-doped $Zn_2SiO_4$ phosphors well known as a green emitter with high luminescence efficiency were prepared by the homogeneous precipitation method, and their photoluminescence properties under vacuum-ultraviolet (VUV) excitation were investigated. $Zn_2SiO_4$:Mn phosphors obtained by this method have exhibited a high luminance of property and a spherical shape of particles. In particular, the green emission intensity of zinc orthosilicate prepared as containing around 2 mole% of manganese was much stronger than that of the commercial $Zn_2SiO_4$:Mn phosphor, while the decay time was longer. However, addition of $Al^{3+}$ and $Li^+$ into $Zn_2SiO_4$:Mn composition has significantly diminished the decay time of the phosphor without much degradation of the emission intensity.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.367-373
• /
• 2011

This paper studies the experimental method that uses the homogeneous precipitation method to prepare mica flakes coated with anatase-type titania pearlescent pigment with urea as precipitant. The optimum technology parameters, the chemical composition, the microstructure, and the color property of resulting pigments are discussed. The coating principle of mica coated titania with various coating thickness is analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy(TEM) and tested by spectrophotometer analysis. The colored nanocrystalline pigments with different morphology and coating thickness 45-170 nm were prepared by homogeneous precipitation treatment of $TiOSO_4$(titanum oxysulfate) aqueous solutions. Characterizations on the pigments show that the pearlescent effects of the pigments depend mainly on mica size, thickness of the metal oxide deposit, its chemical composition, and crystal structure.

• 한국결정성장학회지
• /
• 제27권1호
• /
• pp.18-21
• /
• 2017

본 연구에서는 homogeneous precipitation method를 통하여 구형의 단분산(monodispersed) YAG : $Ce^{3+}$를 합성했다. 단분산 YAG : $Ce^{3+}$의 전구체를 합성하는 과정에서 aluminum ion들이 먼저 석출되어 aluminum 화합물을 형성하고 후에 yttrium 화합물들이 aluminum 화합물들의 표면에서 석출된다. 합성된 전구체를 파우더형태로 얻기 위해 건조과정을 거치는데, oven에서 건조했을 때 보다 동결건조기에서 건조했을 때 비교적 구형의 단분산 YAG : $Ce^{3+}$ 입자를 얻을 수 있었다. 하소 과정에서 공정을 진행하는 온도로서 $1100^{\circ}C$와 $1200^{\circ}C$를 비교해 보았다. 실험 결과 $1200^{\circ}C$의 온도로 상압에서 6시간 동안의 하소 과정을 진행하였을 때 400~500 nm 입자크기를 가진 단분산된 구형의 나노 YAG : $Ce^{3+}$ 입자가 합성되었다.

• 센서학회지
• /
• 제17권5호
• /
• pp.361-368
• /
• 2008

Nanosized $SnO_2$ particles were synthesized by homogeneous precipitation method using tin chloride ($SnCl_4{\cdot}5H_{2}O$) and urea ($CO(NH_2)_2$). The powders were heated at $500^{\circ}C$ and $600^{\circ}C$ for 2h. The crystal structure, microstructure, thermal behavior, specific surface area were analyzed using XRD, FE-SEM, TGA and BET, respectively. The initial resistance and the $H_2$ sensing properties were measured as a function of ${Sb_2}{O_3}$ and Pd doping concentrations. The resistance was decreased with the addition of ${Sb_2}{O_3}$ and the sensitivity for $H_2$ gas was increased with the addition of Pd. Thus, the optimum $H_2$ gas sensing property was obtained in the 0.25.mol% ${Sb_2}{O_3}$ and 1.w% added $SnO_2$ powders.

• 한국농공학회지
• /
• 제43권4호
• /
• pp.57-68
• /
• 2001

It is matter of common knowledge to give impetus to the water resources development to cope with increasing demand and supply for the water utilization project including agricultural living and industrial water owing to the economic and civilization development in recent years. Regional design rainfall is necessary or the design of the dam reservoir levee and drainage facilities for the development of various kinds of essential waters including agricultural water. For the estimation of the regional design rainfall classification of the climatologically an geographically homogeneous regions should be preceded preferentially This study was mainly conducted to derive the optimal regionalization of the precipitation data which can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Wulreung islands in Korea. A total of 65 rain gauges were used to regional analysis of precipitation. Annual maximum series for the consecutive durations of 1, 3, 6, 12, 24, 36, 48 and 72hr were used for various statistical analysis. Both K-means clustering and mean annual precipitation methods are used to identify homogeneous regions all over the regions. Nine and five homogeneous regions for the precipitation were classified by the K-means clustering and mean annual methods, respectively. Finally, Five homogeneous regions were established by the trial and error method with homogeneity test using statistics of $\chi$$^2$ distribution.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.774-780
• /
• 2000

In order to improve luminescence prperty of phosphors, we have synthesized Zn2SiO4:Mn phosphors by a new chemical synthetic route, i.e., the homogeneous precipitation method. This method has featured that the formation of phosphoris completed at relatively low temperature of 105$0^{\circ}C$ and the particle morphology exhibits spherical shape to be well-dispersed and uniform size. At all the Mn concentration explored, phosphors prepared by this method have exhibited the improved emission intensities. In particular, the emission intensities of phosphors with Mn doping contents between 1 at% and 3.5 at% were higher about 40% than that of commercial phosphor. On the other hand, the decay time has been decreased from 23 ms to 11 ms with increasing Mn concentration. In addition, the phosphor composition containing 3 at% Mn has displayed the most saturated color.

• 한국대기환경학회지
• /
• 제11권1호
• /
• pp.57-68
• /
• 1995

Precipitation samples were collected by a wet-only automatic acid precipitation sampler at Kangwha island on the western coast in Korea, through January until December 1992. pH, electric conductivity and the concentrations of major water-soluble ion components such as N $H_{4}$$^{+}$, $Ca^{2+}$, $K^{+}$, $Mg^{2+}$, N $a^{+}$, N $O_{3}$$^{[-10]}$ , S $O_{4}$$^{2-}$ and C $l^{[-10]}$ were measured. From the result of checking the validity for assesment of pollution level of precipitation samples by pH using correlation analysis between pH and major components, and t-test of chemical composition between acid rain and non-acid rain, pH proved to be not satisfactory for its pillution level. A more comprehensive method is therefore required. In order to estimate the monthly analytical result of chemical composition of precipitation samples comprehensively, a cluster analysis was used among the various multivariate statistical analysis. As a result of making a cluster analysis for separating the monthly precipitation samples into homogeneous patterns by setting the concentrations of nine major water-soluble ion components as a variable, three homogeneous patterns were obtained. The first pattern was a group of months having average ion concentrations, the second a guoup of months having low ion concentration, and the third a group of months having high ion concentrations. Thus, it was indicated that the pollution level of precipitation was higher on February and lower on May, June, August and September than the other months. As a result, this analysis method could be estimated the chemical coposition of precipitation regionally as well as monthly.monthly.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.7-16
• /
• 1996

${CO_3}^{2-}$ containing whisker-like hydroxyapatite powders were synthesized byhomogeneous precipitation method using urea, Dicalcium phosphate anhdrate[DCPA; $CaHPO_4$] and octacalcium phosphate [OCP; $Ca_8H_2(PO_4_)6\cdot5H_20$]were obtained as precursors and they transformed to high crystalline hydroxyapatites at pH 5.62, and 6.54 respectively. According to the condition of the final pH in the solutions for the solution products and urea contents OCP was remained. When the solution product of $Ca^{2-}$ and ${PO_4}^{3-}$ was $1.5\times 10^4$[$mM^2$] and the content of urea was 0.25 mol.$dm^{-3}$ well crystallized whisker-like hydroxyapatite tens of micrometer in length was obtained. By heat treatment DCPA and OCP were decomposed into $\beta$-tricalcium phosphate [$\beta$-TCP ; $\beta$-$Ca_3{PO_4}_2$] and $\beta$-dicalcium phosphate [$\beta$-DCP ;$\beta$-$Ca_2P_2O_4}_2$]. And well-crystallized hydroxyapatite was partially decomposed into $\beta$-TCP at $800^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제59권3호
• /
• pp.435-442
• /
• 2021

요소를 이용한 균일용액침전법으로 망간이 첨가된 바륨 헥사알루미네이트를 제조하였다. 합성 후 수세 여부와 건조온도에 따른 영향을 열중량분석, X선 회절분석과 장방출 주사현미경으로 분석하였다. 수세하지 않은 여과단계만 거친 소성촉매가 수세단계를 거친 소성촉매보다 순수한 헥사알루미네이트 상을 얻을 수 있었다. 건조과정 동안 합성 후 잔존한 요소가 전구체에 탈수과정을 도와 주요 금속종인 깁사이트를 순수한 헥사알루미네이트로 변환되기 쉬운 보에마이트로 상변이에 영향을 주었다. 제조된 촉매의 메탄 연소성능 평가는 WO200이 가장 우수하였으며, 모든 촉매연소반응에서 NOx가 배출되지 않았다. 헥사알루미네이트는 최고 CO 배출량을 감소시키는데 영향을 주는 것으로 확인되었다.