• 패션비즈니스
• /
• 제8권6호
• /
• pp.68-77
• /
• 2004

Hollow filament yarns provide better warmth to the touch, lighter in weight, increased opacity, and subtle luster compared to the regular synthetic filament yarns. However, luster properties of textile fibers or fabrics are often difficult to characterize, partly due to the fineness of the surface texture, the anisotropic nature of the weave structure, the complexity of the fiber array comprising a yarn, and the fiber structure itself. In this study, the fabric surface luster image was analyzed using image analysis methods after image acquisition. The hollow filament fiber was modeled using a three-dimensional modeling software. It was then ray-traced for comparing the virtual luster images of the hollow fiber and the regular fiber models based on shading models including photon mapping. The luster object size of the actual hollow filament fabric was smaller than that of the regular filament fabric. The shape of the luster object of the hollow filament fabric was dual peak type while that of the regular filament was single.

• 센서학회지
• /
• 제16권3호
• /
• pp.192-196
• /
• 2007

A fiber-optic interferometric temperature sensor is fabricated using a hollow optical fiber with 8 um air hole. This interferometric sensor for measuring temperature consists of 13 mm long hollow optical fiber whose one end is attached to the single mode fiber and the other end is cleaved. After the sensor is put in a furnace, the phase change of the sensor output signal is measured as the temperature of the furnace increases from $28^{\circ}C$ to $100^{\circ}C$. The phase change of the fiber sensor is proportional to the change of temperature and the relationship between the change of phase and temperature is approximately linear. The sensitivity of this sensor is $2.7{\;}radians/^{\circ}C$.

• 한국미생물·생명공학회지
• /
• 제35권1호
• /
• pp.52-57
• /
• 2007

수소-이산화탄소(5:1) 혼합가스 순환장치를 장착한 반응기를 이용하여 독립영양형 메탄생산세균을 농화하였으며, 생산된 메탄의 농도는 10%미만이었다. 30일 이상 농화배양한 후 16S-rDNA 동질성을 이용하여 반응기에서 생장하고 있는 세균을 분석한 결과 수소를 단일 에너지 원으로 이용하는 Methanobacterium curvum와 Methanobacterium oryzae로 확인되었다. 농화된 세균을 hollow-fiber수소 공급장치를 장착한 반응기에 배양하여 메탄의 농도를 30%까지 향상하였다. 그러나 농화된 세균을 hollow-fiber 수소 공급장치와 미량의 수소를 생산하고 전기화학적 환원성 환경을 유도할 수 있는 장치를 장착한 복합형 반응기에 적용한 결과 메탄의 생산성은 50%가지 향상하였다. 이러한 결과는 독립영양형 메탄생산세균을 농화 또는 대량 배양하기 위해서 hollow-fiber 수소 공급장치와 전기화학적 환원력을 복합적으로 이용하는 것이 유리하다는 것을 보여주는 것이다.

• 멤브레인
• /
• 제26권3호
• /
• pp.212-219
• /
• 2016

알루미나 분말이 분산된 고분자용액을 비용매 유도 상전이법으로 방사 및 소결하여 알루미나 중공사막을 제조하였다. 용매-비용매의 상호작용 속도에 따른 중공사막 기공 구조 형성을 확인하고, 특성을 분석하기 위해 dimethylsulfoxide (DMSO), dimethylacetamide (DMAc), triethylphosphite (TEP) 용매를 사용하여 방사액을 제조하였으며, 고분자 바인더로는 polyethersulfone (PESf), 첨가제로는 polyvinylpyrrolidone (PVP)를 사용하였다. 알루미나 중공사막의 기공 구조 변화를 확인하기 위해 SEM으로 중공사막 단면을 분석하였다. DMSO, DMAc 용매를 사용할 경우 지상 구조(finger-like structure)와 망상 구조(sponge-like structure)가 복합된 기공 구조가 나타났으며, TEP 용매를 사용할 경우 전체적으로 망상 구조를 가졌다. 기공 구조에 따른 중공사막의 특성을 확인하기 위해 기체투과도, 기공도 및 기계적 강도를 측정하였다. 망상 구조를 갖는 중공사막은 높은 기체 투과특성을 보였으며 지상 구조가 증가할수록 기체투과도가 감소하였다. 반대로 기계적 강도는 지상 구조가 발달할수록 증가하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1470-1476
• /
• 2002

The goal of this work is to design and build an implantable artificial lung that can be inserted as a whole into a large vein in the body with the least effect on cardiovascular hemodynamics. The experimental results demonstrate that the pressure drop is not entirely related to viscosity effects. The friction factor decreases with an increase in the number of tied-hollow fibers at a constant Reynolds number A uniform flow pattern without stagnation is observed at all numbers of tied hollow fibers tested. The tied hollow fiber module, built in this study with 3 cm of outer diameter of module. 380 m of outer diameter of tied hollow fiber, and 700 number of tied hollow fiber with length of 60 cm, which shows a pressure drop of 13-16 mmHg, satisfies the required pressure drop qualifying 15 mmHg as an intravascular artificial lung.

• 공업화학
• /
• 제5권6호
• /
• pp.911-916
• /
• 1994

실관 막은 1970년대에 개발된 이래 인공신장기에 응용되어 막 장치개발의 대표적인 성공 예로 인용되고 있다. 실관 막을 생물 반응기로 사용하여 동물세포의 배양에 성공한 이래로 효소 고정화, 미생물 세포 배양, 그리고 식물 세포 배양에 이르기까지 실관막은 고농도, 고생산성 생물 반응기로 활발히 연구되고 있다. 본 총설에서는 실관 막을 이용한 생물 반응기의 연구 현황과 장래 전망에 대해 살펴보고자 한다.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.301-307
• /
• 2013

SiC hollow fiber was fabricated by curing, dissolution and sintering of Al-PCS fiber, which was melt spun the polyaluminocarbosilane. Al-PCS fiber was thermally oxidized and dissolved in toluene to remove the unoxidized area, the core of the cured fiber. The wall thickness ($t_{wall}$) of Al-PCS fiber was monotonically increased with an increasing oxidation curing time. The Al-PCS hollow fiber was heat-treated at the temperature between 1200 and $2000^{\circ}C$ to make a SiC hollow fibers having porous structure on the fiber wall. The pore size of the fiber wall was increased with the sintering temperature due to the decomposition of the amorphous $SiC_xO_y$ matrix and the growth of ${\beta}$-SiC in the matrix. At $1400^{\circ}C$, a nano porous wall with a high specific surface area was obtained. However, nano pores grew with the grain growth after the thermal decomposition of the amorphous matrix. This type of SiC hollow fibers are expected to be used as a substrate for a gas separation membrane.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.156-158
• /
• 2008

Hollow fibers have been used in rather different fields of general textile use and in special-purpose products because of their unique structure. Hollow fibers have profitable properties for some applications because of their large surface/volume ratio. In this paper, dyeing properties of nylon hollow fiber were investigated. Nylon regular fiber and hollow fiber were used in the dyeing experiment. The samples were dyed with three kinds of acid dyes. Effects of dyeing temperature, pH of the dye bath, and dye concentration on dyeing properties were examined.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.596-602
• /
• 2006

The effect of high-temperature spinning and poly(vinyl pyrrolidone) (PVP) additive on poly(vinylidene fluoride) (PVDF) hollow fiber membranes was investigated using differential scanning calorimetry, X-ray diffraction measurement, and scanning electron microscopy, together with the corresponding microfiltration performances such as water flux, rejection rate, and elongational strength. Using high-temperature spinning, porous hollow fiber membranes with particulate morphology were prepared through PVDF crystallization. The particulate structure of the membranes was further modified by the addition of miscible PVP with PVDF. Due to these effects, the rejection rate and strength of the fibers were increased at the expense of reduced water flux and mean pore size, which indicates that high-temperature spinning and PVP addition are vary effective to control the morphology of PVDF hollow fiber membranes for microfiltration.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.249-256
• /
• 2016

Porous $Al_2O_3$ hollow fiber membranes were successfully prepared by dry-wet spinning/sintering method. The SEM image shows that the $Al_2O_3$ hollow fiber membrane consists mostly of sponge pore structure. The contact angle and the breakthrough pressure were $126^{\circ}$ and 1.91 bar, respectively. This results indicate that the $Al_2O_3$ hollow fiber membranes were successfully modified to hydrophobic surface. The hydrophobic modified $Al_2O_3$ hollow fiber membranes were assembled into a membrane contactor system to separate $CO_2$ from a model gas mixture of the flue gas at elevated gas velocity. The $CO_2$ absorption flux was enhanced when the gas velocity increased from $1{\times}10^{-3}$ to $6{\times}10^{-3}$ m/s. Whereas the $CO_2$ absorption flux was decreased with the number of hollow fiber membrane of a module because of the concentration polarization. Furthermore, we developed an lab-scale $Al_2O_3$ hollow fiber membrane contactor modules and their system (i.e., $CO_2$ absorption using the $Al_2O_3$ membrane and monoethanolamine (MEA)) that could dispose of over $0.02Nm^3/h$ mixture gas (15% $CO_2$) with the removal efficiency higher than 95%. The results can be useful in a field of the membrane contactor for $CO_2$ separation, helping to design and extend a equipment.