• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.293-299
• /
• 2007

Intelligent pipeline inspection gauges (PIGs) are inspection vehicles that move along within a (gas or oil) pipeline and acquire signals (also called sensor data) from their surrounding rings of sensors. By analyzing the signals captured in intelligent PIGs, we can detect pipeline defects, such as holes and curvatures and other potential causes of gas explosions. There are two major data access patterns apparent when an analyzer accesses the pipeline signal data. The first is a sequential pattern where an analyst reads the sensor data one time only in a sequential fashion. The second is the repetitive pattern where an analyzer repeatedly reads the signal data within a fixed range; this is the dominant pattern in analyzing the signal data. The existing PIG software reads signal data directly from the server at every user#s request, requiring network transfer and disk access cost. It works well only for the sequential pattern, but not for the more dominant repetitive pattern. This problem becomes very serious in a client/server environment where several analysts analyze the signal data concurrently. To tackle this problem, we devise a fast in-memory cache manager, called T-Cache, by considering pipeline sensor data as multiple time-series data and by efficiently caching the time-series data at T-Cache. To the best of the authors# knowledge, this is the first research on caching pipeline signals on the client-side. We propose a new concept of the signal cache line as a caching unit, which is a set of time-series signal data for a fixed distance. We also provide the various data structures including smart cursors and algorithms used in T-Cache. Experimental results show that T-Cache performs much better for the repetitive pattern in terms of disk I/Os and the elapsed time. Even with the sequential pattern, T-Cache shows almost the same performance as a system that does not use any caching, indicating the caching overhead in T-Cache is negligible.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.217-224
• /
• 2008

In deep geological disposal system, the integrity of a disposal canister having spent fuels is very important factor to assure the safety of the repository system. This disposal canister is one element of the engineered barriers to isolate and to delay the radioactivity release from human beings and the environment for a long time so that the toxicity does not affect the environment. The main requirement in designing the deep geological disposal system is to keep the buffer temperature below 100$^{\circ}C$ by the decay heat from the spent fuels in the canister in order to maintain the integrity of the buffer material. Also, the disposal canister can endure the hydraulic pressure in the depth of 500 m and the swelling pressure of the bentonite as a buffer. In this study, new concept of the disposal canister for the CANDU spent fuels which were considered to be disposed without any treatment was developed and the thermal stability and the structural integrity of the canister were analysed. The result of the thermal analysis showed that the temperature of the buffer was 88.9$^{\circ}C$ when 37 years have passed after emplacement of the canister and the spacings of the disposal tunnel and the deposition holes were 40 m and 3 m, respectively. In the case of structural analysis, the result showed that the safety factors of the normal and the extreme environment were 2.9 and 1.33, respectively. So, these results reveal that the canister meets the thermal and the structural requirements in the deep geological disposal system.

• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.6-10
• /
• 1980

The witches' broom disease of Paulownia tomentosa (Thunb.) Steud with which mycoplasmalike organisms are associated is widespread throughout Korea and poses serious threat to the cultivation of paulownia. Attempt was made to investigate the feasibility of field control of the disease with oxytetracycline hydrochloride (OTC). A total of 84 paulownia trees (6 year-old, DBH: 10-15cm) exhibiting severe symptoms of witches' broom were selected and treated during March to September. Solution of 1-10g of OTC dissolved in 0.1­2.0 of water was transfused into infected trees with gravity flow method from a dark-brown colored plastic reservoir (11 volume) through plastic tubes (1.2m long) connected to 2-4 holes (5 mm in diameter and 4-5cm in depth) bored in the basal part of the tree trunks (Fig. 1 and 2). Of 60 diseased paulownia trees injected with 2g of OTC in 0.1-2.0l of water during May to September, 1979, 58 trees resulted in complete remission of symptom development and resumption of healthy new growth at least up to September, 1980 when the last observation of the effect of OTC treatment for this experiment was made. The rest of two trees were dead probably due to too severe infection. Of 24 paulownia trees treated in March and April, 1979 complete remission of symptom development was obtained with 8 trees, and nine trees were partially prevented from symptom development in the following season. The remaining 7 trees were dead due to failure in uptake of OTC and partly because the trees were in too far advanced stage of infection. Application of highly concentrated solution of 2g of OTC dissolved in 0.1-0.2l of water per tree was just as effective as the 2g/1-2l treatment. Injection of 2g/1-2l required 3-4 days while treatment of 2g/0.1-0.2l reduced the time for injecting one tree down to less than 24 hrs. The result of this experiment demonstrates that basal trunk injection of 2g OTC/0.1-0.2l/tree is feasible for field control of paulownia witches' broom, provided that tree injection is performed in actively growing season (May-September) and at the initial stage of disease development.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.207-214
• /
• 2015

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. $ERA^{(R)}$, $CEKA^{(R)}$, magnetics, $Locator^{(R)}$ attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, $Locator^{(R)}$ has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of $Locator^{(R)}$ attachment is convenient. In this case, the $Locator^{(R)}$ attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 $Locator^{(R)}$ attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.294-298
• /
• 2009

A glasshous experiment was carried out in 2002 to evaluate growth differences between two wick types, and to determine the optimum number of wicks in a wick-based hydroponics for production of 'Dejima' seed potatoes (Solanum tuberosum L.). The six minitubers ($7.0{\pm}0.2g$/tuber) produced through aeroponics were planted in a polystyrene box (51 cm long $\times$ 31 cm wide $\times$ 20 cm high) containing growth medium (perlite+peatmoss 1:2, v/v mixtures). Before the boxes were filled with the medium, 6 wicks per box were vertically and 2 to 10 wicks were horizontally installed, respectively, at the bottom of the boxes through holes. Comparing with 6 vertical wick treatment, 6 horizontal wick treatment increased the number of tubers per plant, but decreased average tuber weight. Yield of tubers greater than 5 g (seed potatoes) was not significantly affected by wick type. As the number of the horizontal wicks per box was increased from 2 to 6, the number of seed potatoes increased from 2.8 to 8.0/plant and then leveled off. Average tuber weight increased with increasing the number of the wicks up to 8 and then leveled off. As the number of the wicks per box was increased from 2 to 6, seed potato yield increased from 1.81 to 6.59 kg/$m^2$ and then slowly increased up to 10 wicks per box, reaching 12.9 kg/$m^2$. The results indicate that installing 8 wicks per box ($0.16m^2$) horizontally for the wick culture system in production of 'Dejima' seed potatoes is beneficial considering seed potato yield, cost of wicks, and convenient filling with medium.

• Journal of radiological science and technology
• /
• v.32 no.4
• /
• pp.453-460
• /
• 2009

The purpose of this study was to determine the dose distribution and image quality according to slice thickness and BC(beam collimation) in the gantry aperture. CT scans were performed with a 64-slice MDCT(Brilliance 64, Philips, Cleveland, USA) scanner. To determine the dose distribution according to BC, a ionization chamber was placed at isocenter and 5, 10, 15, 20, 25 and 30 cm positions from the isocenter in the 12, 3, 6 and 9 o'clock directions. The dose distribution for phantom scan was also measured using CT head and body dose phantom with five holes at the center of the phantom and the positions of the 12, 3, 6 and 9 o'clock directions. The image noise measurement for different BCs was performed using an AAPM CT phantom. Water-filled block of the phantom was moved by 5 cm or 10 cm to the 12 o'clock direction, and the image noise was measured at the center of the phantom, and the points of 12, 3, 6 and 9 o'clock direction respectively. Some points were placed beyond the scan field of view (SFOV), so that measurement was not possible at that points. The results are as follows: The CTDIw showed a larger decrease as the source goes farther from the iso-center or the BC became wider. The CTDIw depends on the BC width more than the number of the channel of a detector array. The value of CTDIW decreased with increasing BC, but the value decreased 16.6~31.9% in the head phantom scan in air scan and 51.0~64.5% in the body phantom scan. The value of the noise was 3.9~5.9 in the head and 5.3~7.4 in the body except for BC of $2{\times}0.5\;mm$, regardless of the degree of deviation from the iso-center. When a subject was located within the SFOV, the position did not significantly affect image quality even if the subject was out of the center.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.39-53
• /
• 2007

Generally, fractured medium can be described with some key parameters, such as hydraulic conductivities or random field of hydraulic conductivities (continuum model), spatial and statistical distribution of permeable fractures (discrete fracture network model). Investigating the practical applicability of the well-known conceptual models for the description of groundwater flow in fractured media, various types of hydraulic tests were applied to studies on the highly fractured media in Geumsan, Korea. Results from single-hole packer test show that the horizontal hydraulic conductivities in the permeable media are between $7.67{\times}10^{-10}{\sim}3.16{\times}10^{-6}$ m/sec, with $7.70{\times}10^{-7}$ m/sec arithmetic mean and $2.16{\times}10^{-7}$ m/sec geometric mean. Total number of test interval is 110 at 8 holes. The number of completely impermeable interval is 9, and the low permeable interval - below $1.0{\times}10^{-8}$ m/sec is 14. In other words, most of test intervals are permeable. The vertical distribution of hydraulic conductivities shows apparently the good correlation with the results of flowmeter test. But the results from the cross-hole test show some different features. The results from the cross-hole test are highly related to the connectivity and/or the binary properties of fractured media; permeable and impermeable. From the viewpoint of the connection, the application of the general stochastic approach with a single continuum model may not be appropriate even in the moderately or highly permeable fractured medium. Then, further studies on the investigation method and the analysis procedures should be required for the reasonable and practical design of the conceptual model, with which the binary properties, including permeable/impermeable features, can be described.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.112-126
• /
• 2012

The theme is to analyze the time-series changes of design elements on golf courses and golf country club and its factors influencing to the changes with regard to 81-membership country club located in the Capital Area of Seoul, created in the periods from 1964 until 2011. The research methods is to analyze the time-series changes of environmental factors influencing to the changes of the elements on the golf course by book review, and to compare and speculate the results of the analysis on the environmental factors with the time-series changes on the golf course elements of statistical analysis as like regression analysis. The research results were as follows. The first, the environmental factors influencing to the change of golf course elements were analyzed as the five elements of the golf-related policies and regulations, the economy, the numbers of golfers, PGA and KPGA golf tournaments, the golf instruments. The second, the type and scale of the location of the golf course were showing trends of transformation from flat ground to mountainous one and from small scale to large one. The third, it was analyzed that he golf course elements as like the sizes, length, numbers of golf course elements as like fairway, green, bunker, teeing ground and pond were influenced by the law and regulation, the increase of amateur golfers, the promotion of techniques of golfers, the increase of the chance of foreign course designer's involvement to domestic market through the opening of PGA and KPGA tournaments etc. The fourth, the promotion of golf instruments and the flying distance were the factors influencing to the numbers of bunker, the lengths of holes. The fifth, it was revealed that the trends of increase of sizes of ponds influenced by enacting environmenal friendly laws and regulations, considering of landscaping, reflecting of design trends followed by the opening of PGA tournaments. Finally, it was proposed that the further research would be introduced with regard to the qualitative analysis onto the changes and influential factors of golf course design.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.293-312
• /
• 1997

Deconstructionism is a philosophical stream in the latter half of 20'th century which goes against western metaphysics and tries to deconstruct the dualism e.g. eastern/west-ern man/woman. Its main concepts are 'indi-vidual' 'other' 'difference' 'restoration of the repressed' 'decentralization' 'Today it shows strong influences in literature art, and other social fields. This study investigated inner meanings and exterior forms represented in clothing on the base of Jacques Derrida's theory in order to re-search modes of deconstruction in is. And it compared clothing with architecture among other genres of art in order to discover similarities between through and modes of art in a certain period. For illuminating concept of deconstruction I referred to the literatures of preceding studies and for deconstruction's characteristics in both clothing and architec-ture I referred work's collection book $\ulcorner$collec-tions$\lrcorner$ and other related books dealing from 1960's to this point. As a rsult there are four modes of decons-truction in both clothing and architecture as follows; 1) Differenance which is a concept of the dif-ference in time and space as being trace. 2) In termeaning of meanings which is not present in reality but re-interpreted a new in the future. 3) Interxtuality in which a texte is not alone but with others 4) Dis.De phenomenon in which distortion and fragmentation forms occur as the result of the denial of perfection and reson. There are characteristics of modes of de-construction in clothing as follows; 1) Differance; R.Gigli, P. Rabanne. G.Bersace, V.Westwood are representatives of the cloth-ing which is combined with the past the pres-ent and the future or is re-viewed as the clothing of the past in the present point of view. J. Watanabe R. Dawakubo I miyake are representatives of the clothing which is out-date but re-viewed in the sense of recollec-tion and re-usage. 2) Intermeaning of meanings: R. kawakubo I, Miyake Y,Yamamoto are representatives of the clothing which is incomplete but re-interpreted in the future and appears to be new-fashioned according to ways of bnding wearing throwing on and tying J.C. Castel-bajac K.Hamnett S.Sprouse are representa-tives of the clothing which is made up of ab -stract forms scribbling or symbolic letters which appears to be different according to view-point of observers. 3) Intertextuality ;J.P.Gaultier K.Hamnett, Comme des Gar ons are representatives of intertextuality of gender which avoids the 여-ality of man/woman J.P Gaultier G,Versace J. galliano are representatives of the intertex-tuality of time place and occasion which mixes temporality extensity and purposiveness. J.P Gaultier G,Versace are representatives of the intertextuality of coordination which combines items different in image purpose and use. P.Rabanne A,Courr ges R,Gernreic I,Miyake are representatives of the intertextuality of mat-ter which uses heterogeneous matter different from cloth. 4) Dis.De-phenomenon: R, Kawakubo I.Mi-yake J.P.Gaultier are representatives of the de-composition which discloses distortion and exag-geration of form through destructing the estab-lished way of construction J.Galliano R.Kawa-kubo Devota Y Lomba arte representatives of the decentring which restores the repressed and the alienated on the one hane and shows front-centrality on the other. Comme des Gar ones is representative of the discontinuity because of which right and left up and down are not in har-mony with one another. J,Galliano J.P,Gaultier T,Mugler are representatives of the disruption by way of which one makes one's body exposed through intentional slashes or holes. As a consequence deconstructionism enabled us to investigate similarities between through of deconstruction and modes of art interms of diffrance Intermeaning of meanings intertextuality and Dis De-phenomenon. And we found that deconstruction was a phase of development in that it as a all-comprising and multiple concept tries to pursue the new through deconstruction.