• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.14-21
• /
• 2001

An experimental study has been conducted to investigate the heat/mass transfer characteristics within a square film cooling hole with asymmetric inlet flow conditions. The asymmetric inlet flow condition is achieved by making distances between side walls of secondary flow duct and film cooling hole different; one side wall is $2D_h$ apart from the center of film cooling hole, while the other side wall is $1.5D_h$ apart from the center of film cooling hole. The heat/mass transfer experiments for this study have been performed using a naphthalene sublimation method and the flow field has been analyzed by numerical calculation using a commercial code. Swirl flow is generated at the inlet region and the heat/mass transfer pattern with the asymmetric inlet flow condition is changed significantly from that with the symmetric condition. At the exit region, the effect of mainstream on the inside hole flow is reduced with asymmetric condition. The average heat/mass transfer coefficient is higher than that with the symmetric condition due to the swirl flow generated by the asymmetric inlet condition.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.937-944
• /
• 2002

An experimental study has been conducted to investigate the heat/mass transfer characteristics within a square film cooling hole with asymmetric inlet now condition. The asymmetric inlet now condition is achieved by making distances between side walls of the secondary now duct and the film cooling hole different; one side wall is $2D_h$ apart from the center of the film cooling hole, while the other side wall is $1.5D_h$ apart from the center of the film cooling hole. The heat/mass transfer experiments for this study have been performed using a naphthalene sublimation method and the now field has been analyzed by numerical calculation using a commercial code. Swirl now is generated at the inlet region and the heat/mass transfer pattem with the asymmetric inlet now condition is changed significantly from that with the symmetric condition. In the exit region, the effect of mainstream on the inside hole now is reduced with the asymmetric condition. The average heat/mass transfer coefficient is higher than that with the symmetric condition due to the swirl now generated by the asymmetric inlet condition.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.1
• /
• pp.59-71
• /
• 2011

As an exaggerated-shoulder becomes a growing trend women's clothing, the crescent shaped sleeve with parallel style lines in the arm hole is a highly used women's sleeve pattern. This study develops and provides an applicable method for making the crescent shaped power shoulder sleeve. An efficient basic method for making the 2 piece crescent shaped sleeve was developed and the sensory appearance test was carried out with experimental clothes. There are two principles for making the crescent shaped sleeve: having a style line in the sleeve and pasting part of the cut arm hole of the bodice to the sleeve. The latter would be more convenient for a 2 piece sleeve, mostly used for jackets. The crescent shaped sleeve used in power shoulder jackets should set the shoulder angle as you wish to extend and raise the shoulder point of the bodice and sleeve to the same height. For a stronger power shoulder image, a 3 piece sleeve has a better appearance. Also, the height of the shoulder has to be enhanced with a shoulder pad for a more stable sleeve.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.671-674
• /
• 2002

Pressure compensating temperature control valve(TCV) is one of the important control devices, which is used to maintain the constant temperature of working fluid in power and chemical plants. The ratio of cylinder hole diameters of inlet and outlet is the main design parameters of TCV. So this needs to be investigated to improve the function of control of temperature and void fraction. In this study, numerical analysis is carried out with various ratios of cylinder hole diameters of the inlet and outlet in the TCV. Especial1y, the distribution of the static pressure Is investigated to calculate the new coefficient($C_{\upsilon}$) and resistance coefficient(K). The governing equations are derived from making using of three-dimensional Naver-Stokes equations with standard $k-{\varepsilon}$ turbulence model and SIMPLE algorithm. Using a commercial code, PHOENICS, pressure and flow fields in TCV are calculated with different inlet and outlet diameters of the cylinder hole for cold and hot water passages.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.355-356
• /
• 2006

The glass transition behavior of OLED materials is very important for both processing and lifetime. We report about the correlation between the structure of selected small molecule Hole Transport Materials (HTM's) and their glass transition temperature. The thermal stability of devices manufactured with them was investigated. The results give researchers and engineers some information which are helpful for designing new molecules and processing them in device making.

• Fashion & Textile Research Journal
• /
• v.1 no.4
• /
• pp.349-357
• /
• 1999

The purpose of this study was to examine how deconstruction, which currently had a great deal of influence on fashion, was actually accepted in view of fashion form or material. In order to track the tendency of deconstructional fashion, an attempt to find out what deconstructional methods were used in fashion design for each formative element was made by looking into earlier studies. Then an analysis was made over the recent fashion magazines. As a result of analyzing four fashion magazines, the most distinctive feature was found to be the use of seethrough cloth. In addition, unsymmetrical form also was immensely used. The next most frequently appeared form was layering, followed by slash or making a hole, lingerie look, padded cloth, indeterminate form, wrinkled cloth and patchworked cloth in the order named. The dominant layering style, the most widely used deconstructional fashion, was that inner cloth could be seen through outer seethrough cloth. The most frequently employed deconstructional cloth was seethrough cloth. Rather than complete seethrough cloth, the shape of lace, net or pattern was employed largely, in which the body could be partially hidden. The most largely used deconstructional method was a slash or making a hole. Most slashes appeared on the front part of the body, to which seethrough stuff was attached in many cases. Based on the above mentional finding. 10 kinds of deconstructional design were proposed for each method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.4 s.36
• /
• pp.274-280
• /
• 1990

This paper is intended to grasp the characteristics of many bodices patterns which have been shown so far. The way is by selecting four characteristic kinds of patterns, making blouses offer the patterns and measuring ease. In measuring the degree of ease, $Scheff\`{e}'s$ paired comparison is made use of. In analysis, variation ratio has come out of analysis of variance, and significance is tested by producing estimated values between patterns. The Result is summed up as follows. 1. After wearing blouses made ofter different basic patterns and measuring ease, the analysis of variance is made about the sensory value of ease. The result is as follows. 1) In the ease of different patterns, all the areas are significant at the level of $1\%$ , regard- less of movements. 2) Under the influence of movements, the back area of arm hole is significant at the level of $5\%$ in narrow movements, and the front and the back area of arm hole are each significant at the level of $1\%$ in wide movements. 3) In the interaction of patterns and movements, bust and the under area of arm hole are each significant at the level of $1\%$ in narrow movements, and bust is significant at the level of $1\%$ in wide movements. 2. When comparing estimated values between patterns, the value of c is the largest and in the order of b,4, a. And in the other movements, the order changes into c,d, b and a. Thus the ease of blouses is different according to patterns. The reason for this is that the amount of ease of bust, the amount and location of darts, and sleeve cap height have complicate influences on the ease of blouses. Both sleeve cap height and the depth of arm hole have influences on the ease of sleeve. Consequently, in making clothes, it would be better to select and use proper patterns which go with the purposes and desings of clothes rather than to apply one pattern to various clothes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.38-44
• /
• 2017

The technology of electrical discharge tap machining may be appropriate for making thread out of highly brittle material. Especially, it is very difficult to machine tap with the traditional method if the brittle material has been hardened by quenching. In this study, the shape of electrical discharge blind hole tap machining was analyzed by discharge time, discharge current, and the flushing hole condition after quenched the tool steel of STD11 has discharged the tap shape with a screw-shaped copper(Cu) electrode. An experimental design was planned and analyzed by Taguchi robust experimental design. The result showed that the shape of the blind hole discharge tap was influenced by the flushing hole, discharge time, and discharge current. The most important factor of the processing conditions was found to be the discharge current. When blind hole EDM with a copper electrode with a flushing hole was conducted, the discharged shape was found to be smooth and the angle of the discharged tapped thread was also found to be close to the thread angle of $60^{\circ}$. As the values of discharge time and discharge current increased, the EDMed surface coarsened due to the increase of the single discharge energy and the shape of the thread collapsing.

• Journal of Embryo Transfer
• /
• v.23 no.1
• /
• pp.1-4
• /
• 2008

This study was performed to investigate the effect of laser-assisted hole in the zona pellucida (ZP) of frozen-thawed ICR mouse embryos on the process of hatching that is critical for expanded blastocysts to implant into endometrium, Vitrification medium, composed of ethylene glycol and sucrose supplemented with 7.5% (w/v) PVP, was used to freeze $2{\sim}4$ cell stage embryos recovered from oviducts of superovulated and mated female mice before storing them in $LN_2$. Right after thawing them, a laser beam was shot to make a hole in ZP followed by culturing in KSOM for $96{\sim}120\;hr$ and examining development to blastocyst and hatching every 12 hr. Laser-treated embryos showed significantly higher hatching rate compared to control (92.9% vs. 22.1%, p<0.05). From around Day 4, blastocysts developed from laser-treated embryos started hatching while the blastocysts of control group failed to hatch showing a lot of shrinkage. This study shows that a laser-assisted hole in ZP improves the hatching rate of blastocysts developed from frozen-thawed, in vitro cultured ICR mouse embryos.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.7-12
• /
• 2004

Large-sized pins are usually used to lift and handle large low speed diesel engine crankshaft. There has then been a need to reduce and optimize the weight of the traditionally used pins. Making an hole by cutting the inside of the pin out was investigated in view of static and fracture strength. To compensate the stress increase caused by the introduction of the inner hole, the groove in the circumferential direction pre-existing on the pin is to be removed. Finite element analysis was carried out for both the original model and weight reduced model. Stress intensity factors for semi-elliptical defects assumed on the pin for the original model and weight reduced model was calculated using the ASME method and compared with the fracture toughness test result of the pin material. The diameter of the cutting hole for the revised model was determined based on the analysis results.