• 한국의류학회지
• /
• 제40권4호
• /
• pp.669-684
• /
• 2016

This study investigates Korean fighter pilot's usage and satisfaction of a flight duty uniform (FDU). The survey was conducted from October 2014 to March 2015 using Focus Group Interview (FGI) and questionnaires. FGI collected qualitative data about duty and requirements; subsequently, surveys were performed to collect quantitative data about wearing conditions and satisfaction with FDU. The results of the FGI and the questionnaire were as follows. Type of pilot duty was divided into two parts, flight duty and ground duty. It is important to consider duties as well as factors related to survival when developing FDU. According to anthropometric data and wearing size, the basic size for apparel grading should be changed from actual size, 'M95XL' to 'M100L'. It is also necessary to improve the whole sizing system. Further studies about body form changes in pilot's movement are needed to improve mobility because the respondents perceived some restrictions at several body parts in movement with the coverall uniform. Summer FDU had a low satisfaction level in vent hole function and appearance. Furthermore, protection problems in the vent hole were also an issue. Making a seasonal classification of FDU fabric will be more effective than a vent hole to increase a pilot's thermal satisfaction. Respondents had a passive stance towards FDU reform (including pocket change); therefore, a new FDU design strategy should concentrate on improving current FDU functions like mobility (or comfort) rather than dramatic changes. Pilots complained about the quality stability of FDU; therefore, quality control by military administration as well as concrete and clear design instructions by the developer should be attained together. The results obtained in this study are expected to be used as an important basis for the further development of FDU.

• 복식
• /
• 제66권6호
• /
• pp.95-109
• /
• 2016

The process of making fashion accessories brings many benefits to visually impaired people. It helps the development of their tactile sensation, improves their aesthetic attitude, creativity, and imagination, and brings energy to their life. The current accessory making education in Korea is targeted to people with normal vision, and does not reflect the specific needs of the visually impaired. This causes a lot of trouble in educating the visually impaired. Therefore, this study aims to increase the efficiency of accessory making education by selecting curriculum and material that are appropriate and systematic for the visually impaired. In order to understand visual impairment, literature review was conducted to examine the definition and classifications of the impairment. Research was also done regarding material types and production method of fashion accessory. The study also designed an education program, including teaching guidelines, by referring to literature related to fashion accessory design, teaching guideline. The study conducted 12 experiments based on the results from April to June 2014. After revising and supplementing the teaching method, 2nd set of experiments were conducted from July to September 2014. Each class lasted for one and a half hour every week, and the class was composed of 6 students, 1 instructor and 1 volunteer. After each class, interviews were done to collect student opinions about the curriculum and material. Total experiment results and interview were reflected in constructing the final education program. The result of the experiments and interviews showed that selecting the accessory materials for class must be selected carefully. The visually-impaired students were very sensitive to the size, texture, shape, hole size of beads and length of material. After the experiments, all the students were able to distinguish the size and shape of the beads well, and finished the accessories using the given materials. The study verified that there is a need for another approach when educating the visually impaired about fashion accessory design. Many factors need to be considered from selecting materials to class contents. This study will contribute as a reference to fashion accessory making education as well as other design education for the visually impaired.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.254-261
• /
• 2005

The purpose of this research is to develop a method for cutting non-circular holes on a bent thick plate. Generally in order to cut the holes on the large plates, a special-purpose 5-axis machine is needed. However, such a machine is unavailable in most of the machine shops. This paper provides a description of such a method that utilizes a general-purpose 5-axis water-jet machine in place of the special-purpose machine: First, the bent piece is transformed into a flat plate, where the shape of the holes is reconstructed by considering deformation during bending. Then, after a 5-axis NC data is generated, the holes on the flat plate are cut using the 5-axis water-jet machine. The final step is to return to its, original shape by bending the plate with its newly-cut holes. The proposed methodology is implemented as a dedicated system by customizing a commercial CAD/CAM system. Some illustrations are provided throughout the paper in order to show the validity of the proposed methods and the developed system.

• Journal of Korean Neurosurgical Society
• /
• 제47권6호
• /
• pp.433-436
• /
• 2010

Objective : Arachnoid cysts (ACs) can be cured by making the definite and wide communication between the cyst and arachnoid space using endoscopy, but often it is impossible only through the usual working-channel (intra-channel) procedures. We discuss and propose a more valuable endoscopic technique with the presentation of our series of cases. Methods : We treated 9 patients with cortical AC in various locations with extra-channel endoscopic techniques. The patients ranged in age from 3 years to 60 years (mean age, 37.2 yrs). The follow-up period ranged from 12 to 26 months (mean follow-up duration, 17.2 months). All patients had large AC compressing the adjacent brain with clinical symptoms or signs. The authors performed extensive fenestration via single burr hole with the aid of endoscope. Being bypassed the rigid endoscope, through the space between the shaft of endoscope and guiding cannula (extra-channel method), fenestration procedures were done in the dry fields. Results : Eight (88.9%) patients had been treated successfully with endoscope. One patient required shunt procedure. Among the eight patients who were treated with endoscopic procedure, 6 patients (66.7%) showed cyst reduction, and two (22.2%) showed disappearance of cyst. Conclusion : We suggest that extra-channel method will be simple and easy to perform using more valuable instruments with wider working area, and may promise better results compared to the conventional intra-channel endoscopic procedures.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.675-681
• /
• 2015

When many holes on a plane are machined simultaneously, the positional precision and machining efficiency are very important. Multi-spindle heads are typical order making products of which the number of shafts and hole positions vary depending on the size or form of the product. For the automatic design of multi-spindle heads, the design modules for power transmission systems for drive, idle, and spindle shafts were developed, and a design technique the determining the optimum position and number of idle shafts according to gear positions was developed. In addition, for the precise determination of the multi-spindle head, the design methods for the guide planes of columns, and feed mechanisms were devised. In addition, the design modules for accurate clamping and automatic transportation mechanisms were developed. Finally, in order to simplify and standardize the design process, the design analysis and simulation verification modules are integrated.

• 한국ITS학회 논문지
• /
• 제7권1호
• /
• pp.68-74
• /
• 2008

SIW (Substrate Integrated Waveguide) cavity 공진기의 구조는 유전체기판에 다수의 via-hole 을 이용함으로써 나타낼 수 있으며, rectangular waveguide 와 유사한 특성을 갖는다. 그리고 $50-{\Omega}$ 마이크로스트립라인과 SIW cavity 공진기 중앙간의 결합구조를 통하여 대역저지 특성이 나타나도록 하였다. 이러한 특성을 갖는 SIW cavity 공진기를 이용하여 X-band(9.45 GHz) 발진기를 제작하였고, 위상잡음은 100kHz offset에서 -98.1 dBc/Hz 로 측정되었다. SIW cavity 공진기는 높은 QL 값을 갖고, 2차원 구조이기 때문에 저비용에 우수한 위상잡음 특성을 갖는 발진기 설계에 응용할 수 있다.

• 한국기계가공학회지
• /
• 제11권6호
• /
• pp.22-27
• /
• 2012

Drilling process is usually the most efficient and economical method of making a hole in a solid body. However, there have been no analytical method to assess drilling process based on the shear and frictional characteristics. In this paper, procedures for analyzing shear and frictional processes of drilling have been established by adopting an equivalent turning system to drilling. A series of drilling experiments were carried out with varying feed, velocity and drill shape factors. Using the results of the experiments, the cutting characteristics including shear in the primary shear zone and friction in the chip-tool contact region of drilling process have been analyzed. The specific cutting energy tends to decrease exponentially with increase of feed rate. In drilling process 35-40% of the total energy is consumed in the friction process. This is greater than that of turning process in cutting of the same work material.

• 설비공학논문집
• /
• 제29권8호
• /
• pp.437-445
• /
• 2017

Because of improvement of living standards and increased use of ice at home, built-in ice makers are of interest. In this study, refrigeration cycle of a unitary ice maker for residential usage was optimized using R-404A. Optimization was achieved through a search for proper refrigerant charge amount. For the present ice maker producing ice for 24 cups, the optimum charge amount was 200 g. In this configuration, the ice making cycle time was 17 minutes 53 seconds, ice production was 1.27 kg/h and COP was 0.310. After initial start-up, condensation and evaporation temperatures gradually decreased with time. As ice builds in the cup, heat transfer performance of the evaporator decreases, that results in decrease of evaporation and condensation temperatures. Replacement of existing slit nozzles with individual circular hole nozzles improved ice production capacity by 10 percent. Through visualization of ice formation in the ice cup, growth rate of the ice in the cup was relatively uniform.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.11-17
• /
• 2016

Currently, the number of a shopping center building is increasing because most people want to go a shopping center building easily for buying many things and eating some foods. That are a normal trend these days. However, the increasing number of shopping center buildings has been increasing the number of shopping center building fires which also have been making social problems. Therefore, this study was conducted for the fire department connection among other fire facilities because it is important for fire suppression. The research subject is on the fire department connections that are on 70 shopping center buildings of more than 5 years old constructed. Survey and analysis were conducted for 70 fire department connections. The result of this study is that all installed fire department connections have a type that includes one or two holes each at 65mm wide, and the average distance between fire department connections and access roads is 4.85m. The total average percentage of insufficiency conditions such as drive ways for fire trucks, visibility, accessibility, pressure range sign, installed height, cover of the hole, etc. is 45.3%. So improvement of law and systems, that are fire facility construction and maintenance implementations, will be needed in my opinion.

• Journal of Korean Neurosurgical Society
• /
• 제62권2호
• /
• pp.144-152
• /
• 2019

Treatment of chronic subdural hematoma (CSDH) is relatively straightforward, however, there is still some debate regarding the best strategy for treatment. The most practical recommendations of up to date were identified by a review of literature. The author reviewed the literature on CSDH management from the past to now to identify the best methods. Till 1970s, craniotomy was the most commonly used method. Burr hole (BH) became the most preferred method from 1980s. In 1977, twist drill (TD) craniostomy was introduced. Closed system drainage after a BH or a TD became the most frequently used surgical method. Although nonsurgical treatment is often successful, trephination has more advantages, such as rapid resolution of the symptoms and short period of hospitalization. Nonsurgical treatment is possible in asymptomatic patients with a small CSDH. For the symptomatic patients with CSDH, trephination is the treatment of choice, either by BH or TD. In gray zone between surgery and medical treatment, shared decision making can be an ideal approach. For the recurrent CSDHs, repeated trephination is still effective for patients with a low risk of recurrence. If the risk of recurrence is high, additional management would be helpful. For the refractory CSDHs, it is necessary to obliterate the subdural space.