• Design & Manufacturing
• /
• v.2 no.5
• /
• pp.30-33
• /
• 2008

Injection Molding is the most effective process for mass production of plastic parts. The injection molding process is composed with several steps such as Filling, Packing, Holding, Cooling, Ejecting. Among them, filling and packing process should be considered carefully to improve accuracy of dimension, surface quality of plastic parts. Usually the quality above-mentioned is managed with weight of part after molding on the field. In this paper, a series of experiment for molding automotive front bumper was conducted with cavitity temperature sensor to optimize switch-over time(V-P switching), hot runner vale gate sequence time during filling and packing step for the purpose of uniform quality, weight at every molding. As a result, it was found that it is effective method to use temperature sensor in injection molding for quality control of plastic molding.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.1
• /
• pp.92-100
• /
• 2009

Today international trade through maritime transportation is significantly increasing. Due to this increase, shipping companies are faced with problems concerning the repositioning of empty containers from import dominant ports. The liner shipping service network has been provided to transport containers which load customers' freights. Container ships are moved on the liner shipping service network by observing the predetermined route and transportation time. This research deals with the empty containers distribution problem considering the container ship route. A mathematical model based on the mixed integer program has been introduced in this study. The objective is to minimize the total relevant costs of empty containers such as handling, leasing, and inventory holding, etc. Due to the complexity of the problem, a genetic algorithm has been suggested to solve large sized problems within a reasonable time. Numerical experiments have been conducted to show the efficiency of the genetic algorithm.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.115-124
• /
• 2002

The purpose of this study is to analyze the ground reaction force of arm landing on arm and leg during sports aerobics. Subjects of this study were total 10 players of 5 males and 5 females who have are domain sports aerobics medalists more than the third place in national tournaments. The subjects jumped between the two ground reaction force analyzers, while landing their right hand on the front platform(#1) and their right leg on the rear platform(#2), and the data frequency was set to 200Hz. Findings of this study are as follows; More than 3 times of impact peak force of vertical reaction force acted on arm joint than on leg joint. And, when ground reaction force on foot increased, ground reaction force on hand decreased. 3 impact peaks of curve of ground reaction force were found - Impact Peak 1 incurred on the time the palm lands on the ground, Impact Peak 2 absorbing shock secondarily on wrist joint, and Active Peak incurred on the time of holding the weight while pushing out the severly bent elbow joint.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.695-698
• /
• 2002

Induction heating process is one of the most efficient heating process in terms of temperature control accuracy and heating time saving. In the past study, fabrication process of cellular 6061 alloys by powder metallurgical route and induction heating process was studied. To supplement the framing conditions that studied in past study, effect of induction heating capacity and holding time at foaming temperature were investigated. Under the achieved framing conditions, teamed 6061 alloys were fabricated for variation of foaming temperature, and porosities(%)-foaming temperature curves were obtained by try-error experimental method. Uniaxial compression tests were performed to investigate the relationship between porosities(%) and stress-strain curves of framed 6061 alloy. Also, energy absorption capacity and efficiency were calculated from stress-strain curves to investigated. Moreover, dependence of plateau stress on strain rate was investigated in case of cellular 6061 alloy with low porosities(%)

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.153-167
• /
• 2004

This study focuses on building the wartime air operation model to evaluate the airfield capability. There are some uncertainties in the process of air operation such as mission flying time, turn around time, mission damage or kill rate, weather condition, and so on. Airplanes, on the way to the airbase after completing mission flight, may have been in queue on the holding point due to the unusable condition of airfield. And then, they may sometimes need to go other airbases due to the shortage of fuel. Under those uncertainties, this model is to evaluate the airfield capability in the wartime air operation using simulation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.938-946
• /
• 2005

We study the firm's strategy to price its products and plan the spare parts manufacturing so as to maximize its profit and at the same time to fulfill its commitment to providing the customers with the key parts continuously over the relevant decision time horizon, i.e., the production plus warrantee period. To examine the research question, we developed and solved a two-stage optimal control theory model. Our analysis suggests that if the cost to produce the spare part during the warrantee period is more expensive than that during the production period, the firm should increase its sales price gradually throughout the production period to control its sales. In addition, during the production period it is optimal for the firm to produce the spare parts more than needed so that the overproduced spare parts can be used to partially meet the demand during the warrantee period. We conducted numerical analysis to investigate the sensitivity dynamics among key variables and parameters such as inventory holding cost, unit spare part production costs, part failure rate, and parameters in the demand function.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.821-823
• /
• 1999

This paper describes a study on a person identification system which can improve currently available biometric systems. In the procedure of PIN(Personal Identification Number) input, holding time, interkey time between key presses are measured and normalized. Person identification is performed by matching using Euclidean distance of these punching dynamics. The experimental results show the possibility of improvement of the overall system performance when keypad dynamics feature is applied to the biometric systems which take PIN input using keypads.

• Journal of the Korea Society for Simulation
• /
• v.3 no.2
• /
• pp.27-36
• /
• 1994

In many real-world simulation studies the several measures of performance are of interest simultaneously. There exist very limited number of studies that explain and suggest the methods or procedures of inferencing the system performances at the same time. This study presents a procedure for determining the number of simulation observations required to achieve the prespecified confidence level for several measures of system performance. Mean values are selected as the measures, for instance, expected ordering cost, expected holding cost, and expected shortage cost for a given period of time in the study of inventory problems. Basically, the batch means approach is applied and extended to develop an algorithm to carry out the procedure handling more than single parameter. The efficacy of the presented method is assessed through the experiments. The empirical results based on some stochastic systems such as queues and inventory problems show that the suggested method produces as excellent result in terms of the precision of estimated means and the number of observations required.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.327-329
• /
• 2009

In a network, broadcasting is the dissemination of a message from a source node holding a message to all the remaining nodes through a call. This letter proposes a one-to-all broadcasting algorithm in the Petersen-torus network PT(n, n) for the single-link-available and multiple-link-available models. A PT(n, n) is a regular network whose degree is 4 and number of nodes is $10n^2$, where the Petersen graph is set as a basic module, and the basic module is connected in the form of a torus. A broadcasting algorithm is developed using a divide-and-conquer technique, and the time complexity of the proposed algorithm approximates n+4, the diameter of PT(n, n), which is the lower bound of the time complexity of broadcasting.

• The Korean Journal of Rheology
• /
• v.4 no.2
• /
• pp.116-126
• /
• 1992

본 연구에서는 형내압 파형제어 시스템, 초고속, 사출성형, 그리고 금형진공 시스템 등을 갖춘 사출 성형기를 이용하여 정밀 구면렌즈를 성형하기 위한 실험을 수행하였다. 이 러한 목적을 위해 성형공정 변수인 사출시간 충전압력 그리고 보압시간이 성형품에 미치는 영향을 중량과 곡률반경 구면 정밀도 그리고 구면오차의 간접무늬를 측정하여 연구하였다. 그결과로서 성형품의 중량(칫수)과 곡률반경에 지대한 영향력을 행사하는 변수는 충전압력 이며 사출시간과 보압시간은 곡률반경과는 무관해 보이고 중량의 증가에는 기여하지만 공정 사이클 시간을 증가시키는 문제가 지적된다. 구면정밀도 측정실험 결과 길지도 짧지도 않는 15∼20초 사이의 보압시간 4초이내의 빠른 사출시간 그리고 860kg/cm2 이상의 높은 충전압 력에서 우수한 결과를 보여주었다, 마지막으로 구면의 형상에 대한 간접무늬 측정결과는 성 형공정을 이해하는데 강력한 도구가 됨을 발견하였다.