• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.2
• /
• pp.43-50
• /
• 2008

In this paper we suggest the methods that compute the total inventory cost based on EOQ and the total inventory cost based on OMMIP. The total inventory cost consists of purchasing cost, ordering cost, inventory holding cost, stockout cost and so on. This papers also proposes the method that decides optimum order quantity as the order amount to minimize the total inventory cost with comparison of EOQ total inventory cost and OMMIP total inventory cost according to inventory holding cost as a fraction of unit cost.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.532-541
• /
• 1997

This article derives an analytic solution to determine the optimal size of multiple noncontinuous process and storage units. The total cost to be minimized consists of the setup cost of noncontinuous processing units and the inventory holding cost of feedstock/product storages. A novel approach, which is called PSW(Periodic Square Wave) model, is applied to represent the material flow among non-continuous units and storages. PSW model presumes that the material flow between unit and storage is periodic square wave shaped. The resulting optimal unit size has similar characteristics with the classical economic lot sizing model such as EOQ(Economic Order Quantity) or EPQ(Economic Production Quantity) model in a sense that the unit size is determined as the balance between setup and inventory holding cost. However, the influence of inventory holding cost of PSW model is different from that of EOQ/EPQ model. EOQ/EPQ model includes only the product inventory holding cost but PSW model includes all inventory holding costs around the non-continuous unit with proportional contribution. PSW model is suitable for analyzing interlinked process-storage system. The optimal lot size of PSW model is smaller than that of EOQ/EPQ model. This is quitea remarkable result considering that the EOQ/EPQ model has been is widely used since last half century.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.117-124
• /
• 2005

This study tries to develop the models of measuring the level of product availability accommodated for features of specific customers dividing customers into VIP customers and general customers. Functions of costs that the models are composed of are cost of holding safety stock and cost of lost opportunities. The existing model of measuring the level of product availability which focused on cost of holding safety stock for VIP customers should be reinforced by considering cost of lost opportunities caused by general customers' quitting trades with a company. This study tries to present realistic solutions for problems in making decisions related to the total inventory. This study concludes that the model of the level of product availability meeting general customers' needs is more efficient according to increasing of a latent demand of the general customers who quit trades with a company and the cost of lost opportunities.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.19 no.1
• /
• pp.169-187
• /
• 1994

The efficiency of marketing channel of distribution between a sholesaler and a retailer with uncertain characteristics can be improved by influencing the retailer's ordering pattern. The wholesaler with large unit invetory holding cost can offer a large quantity discount tanks to the great benefit which comes from the transfer of part of his inventory to retailer. The retailer's increasing average inventory holding cost can be offset by the quantity discount and by savings of the ordering cost. Conditions under which marketing channel improvement can be possible are derived.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.3
• /
• pp.12-19
• /
• 2007

This paper is to determine the transportation size and the location of distribution centers to minimize logistics cost in a distribution system where products are transported from the distribution centers to the retailers. Logistics cost consists of the fixed cost of distribution centers, the transportation cost from the distribution centers to the retailers and the inventory holding cost in the retailers. The logistics cost is affected by the transportation size and the location of distribution centers. The transportation size affects transportation cost and inventory holding cost. The location of distribution centers affects the transportation cost. A mathematical model is formulated and the algorithm is developed. A numerical example is shown to explain the problem.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.25-34
• /
• 2011

In this paper, we investigate an inventory system where a single manufacturer purchases and processes raw materials in order to deliver finished goods to multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce finished goods, but we consider multi-raw materials in order to produce finished goods. Also, we develop an iterative solution procedure to find the order quantity for the finished goods and raw materials, and the number of shipments between manufacturer and retailers that minimizes the total cost per unit time of the raw materials ordering and holding, manufacture's setup and finished goods holding, the retailer's ordering and inventory holding. Numerical examples are presented to illustrate that jointly considering the total cost results in less total cost than that of considering them separately.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.129-138
• /
• 2014

This paper is to analyze the cycle time of the vendor in a single-vendor multi-buyers supply chain. The vendor is the manufacturer and the buyers are the retailers. The cycle time of the vendor is the elapse time from the beginning time of the production to the beginning time of the next production. The cycle time of the vendor that minimizes the total cost in a supply chain is analyzed. The cost factors are the production setup cost and the inventory holding cost of the vendor, the ordering cost and the inventory holding cost of the retailers. The cycle times of the vendor obtained with the costs of the vendor is compared with those obtained with the costs of the vendor and the retailers. Various numerical examples are tested if the cycle times of the vendor for both methods are the same.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.117-126
• /
• 2015

This paper is to analyze an integrated production and inventory model in a single-vendor multi-buyer supply chain. The vendor is defined as the manufacturer and the buyers as the retailers. The product that the manufacturer produces is supplied to the retailers with constant periodic time interval. The production rate of the manufacturer is constant for the time. The demand of the retailers is constant for the time. The cycle time of the vendor is defined as the elapsed time from the start of the production to the start of the next production, while the cycle times of the buyer as the elapsed time between the adjacent supply times from the vendor to the buyer. The cycle times of the vendor and the buyers that minimizes the total cost in a supply chain are analyzed. The cost factors are the production setup cost and the inventory holding cost of the manufacturer, the ordering cost and the inventory holding cost of the retailers. The cycle time of the vendor is investigated through the cycle time that satisfies economic production quantity with the production setup cost and the inventory holding cost of the manufacturer. An integrated production and inventory model is formulated, and an algorithm is developed. An numerical example is presented to explain the algorithm. The solution of the algorithm for the numerical examples is compared with that of genetic algorithm. Numerical example shows that the vendor and the buyers can save cost by integrated decision making.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.2
• /
• pp.3-14
• /
• 1992

The efficiency of marketing channel of distribution between a manufacturer with several customers can be increase by influencing the order quantity of customer. Manufacturer reduces average inventory holding cost by penalizing the large order quantity from the customer. Such a penalty is significant only if the manufacturer's unit inventory holding cost is relatively large. Conditions under which such penalizing can be beneficial to both parties are derived.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.90-96
• /
• 2009

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. Today, injection molded parts have been increased dramatically the demand for high strength and quality applications. This report investigates that the optimum injection molding condition for minimum of shrinkage. Molding shrinkage is occurred by several reasons such as thermal shrinkage, a hardening process and compressibility. This report concentrate on shrinkage by a hardening process. As Change a holding pressure and holding time, checked deflections of X, Y, Z directions by shrinkage based on same condition. In conclusion, it was found that holding pressure is stronger and holding time is longer, the deflection by shrinkage is smaller because injection molding needs enough time for cooling and high density. The FEM Simulation CAE tool. Moldflow, is used for the analysis of injection molding process.