• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.892-901
• /
• 2007

This research is the initial step for establishing a convertible body sizing table applicable to the Korean and American female apparel industry. All 3D female measurement data of the two countries were obtained from Size Korea Project and SizeUSA Project. The sample subjects used in this study were 1,988 Korean and 6,306 American females. Thirty-four(34) variables were chosen as the principal measurements in making garments. The conclusion of this research was as follow: First, it was determined that American women were larger and longer than Korean women in all measurement except shoulder slope measurement. Second, according to the differences analysis of the each age group in Korean Females, all measurements except hip girth had significant differences among the age groups. In case of American females, all measurements except arm length(shoulder to wrist) had significant differences among the age groups. Third, in the comparison of differences between the age groups of the two countries' women, some dimensions varied significantly with age, while others did not show any statistical significance among the age groups. Fourth, according to the t-tests of same age groups between Korean & American female measurements, American female measurements were larger and longer than Korean in all measurements except crotch length total, shoulder slope, hip girth-bust girth and hip girth-waist girth.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.363-364
• /
• 2002

Although the factors that cause the failure of orthopedic implants were not clearly determined, it was reported that the shapes of wear debris affect the tribological behavior of artificial implant. Many researches were conducted to examine the wear mechanism by debris but the role of debris shape in inflammatory reaction remains unclear. To observe the debris shape by addition of reinforcement, carbon nanotubes ( CNTs ) were added to ultra high molecular weight polyethylene ( UHMWPE ) to investigate the reinforcement effect of CNTs. CNTs which have a diameter of about 10-50 nm, while their length is about 3-5 nm were produced by the catalytic decomposition of the acetylene gas using a tube furnace. Plate on disc type wear test were performed to evaluate the tribological performance of UHMWPE composites reinforced with CNTs in lubricating condition ( bovine serum ). The wear losses of CNT added UHMWPE in bovine serum were significantly reduced. Worn surface and wear debris of UHMWPE with CNTs and without CNTs were compared to investigate the reinforcement effect of CNT on tribological behavior.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.41-57
• /
• 2006

The purpose of this study were to provide dress forms and men's jacket blocks based on the analysis of their somatotype. As the result of the previous research, based on 1290 males of 20 to 54 year-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth and master size was selected considering appearance frequency. Somatotype YS(master size: height 170cm, chest girth 91cm) and HD1(master size: height 170cm, chest girth 94cm) were selected to develop dress forms and men's jacket block in the study. The procedure and results were follows; 1. The dress forms of somatotype YS and HD1 were provide base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New men's jacket blocks of somatotype YS and HD1 were developed based on the body surface extracted by draping and the result of comparative investigation on the conventional jacket patterns by wearing test. Also the drafting methods of new men's jacket blocks were provided. 3. Wearing test by the sensory evaluation showed that the developed jacket blocks were estimated more highly than existing patterns.

• Fashion & Textile Research Journal
• /
• v.7 no.6
• /
• pp.601-608
• /
• 2005

This research investigated the present state of the dress forms used by clothing manufacturers and proposed procedure to bring out the standardized body type and figure for women in twenties. The result of questionnaire showed chief pattern maker's thoughts that dress form should be differently made for each age group and should be more reflected the standard body than the idea body. The standardized body type was made from the standardized posture and size which were analyzed from the interquartile range(IQR) of 314 subjects. The standardized size could be verified as for the balanced body shape of twenties through making the standard dress form. The standardized form(S form) was compared with three kinds of forms(A, K and P) for investigating the suitability of forms. K form was very similar to S form, Educational P form and manufacturer's A form had quite big differences from S form at the important areas for making clothing. The side shapes of A, K and P forms showed differences at back bending, neck angle and hip shape from S form. A form was comparatively smooth and flat. This results could be used as the practical standard to improve the suitability of size and shape in the dress forms of manufacturers and educators.

• Journal of Sasang Constitutional Medicine
• /
• v.28 no.1
• /
• pp.11-18
• /
• 2016

Objectives The body shape was a key information for diagnosing the Sasang constitution (SC) in Sasang constitutional medicine. The aim of this study was to compare the body shapes and mainly focusing on the Korean and Chinese-KoreanMethods We calculated the propensity score for each SC type in males and females separately, and compared body shape including 8 circumference and 5 width between Korean and Chinese-Korean according to the sex and SC.Results Koreans have larger trunk and hip area compared to Chinese-Koreans, while Chinese-Koreans have larger abdomen compared with Koreans. Most variables were significantly different among SC types, for both Korean and Chinese-Korean. Especially, the Taeumin (TE) type has the largest body shape compared with the other SC types, it was similar between Korean and Chinese-Korean.Conclusions This study showed that the TE type has the largest body shape, followed by Soyangin (SY) and Soeumin (SE) in order, for both Korean and Chinese-Korean respectively. These results suggests that the body shape of Chinese-Korean is similar with Korean based on SC type.

• Journal of the Korean Home Economics Association
• /
• v.40 no.6
• /
• pp.185-195
• /
• 2002

This study was carried out to investigate the wearing silhouette of jackets according to the mechanical properties, primary hand value and total hand value of the 3 types of wool fabrics. Wool/PET(50/50), wool/PET(80/50) and wool(100%) fabrics were used as test specimens. Mechanical properties of specimens were measured by KES-FB system and primary hand value and total hand value were calculated by equation KN-203-LDY. We made three experimental jackets based on the precious jacket pattern and used Moir Photography to measure the amounts of space between the jacket clothes and body surface from the overlap cross section map. The results were as follows: 1) In mechanical properties, woo/PET(80/20) fabric showed higher bending and shear rigidity. 2) In evaluation of primary hand and total hand, wool 100% fabric showed higher NUMERI and FUKURAMI hand and total hand value. 3) From the reset of Moir Photography, the wearing shapes of the experimental jackets were influenced by the characteristics of fabrics. Except for the hip part, the garment ease of wool/PET(80/20) fabric was estimated more highly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.133-142
• /
• 1993

This paper prrsents shape matching of two-dimensional object. This shape matching is applied to two-dimensional simple c10sedcurves represented by polygons. A large number of shape matching procedures have proposed baseed on teh view that shape can be represented by a vector of numerical features, and that this representation can be matched using techniques from statical pattern recognition. The varieties of features that have been extracted from shapes and used to represent them are numerous. But all of these feature-based approches suffer from the shortcoming that the descriptor of a segment of a shape do not ordinarily bear any simple relations hip to the description for the entire shape. We solve the segment matching problem of shape matching, defined as the recognition of a piece of a shape as approximate match to a part of large shape, by using relaxation labeling technique.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.369-374
• /
• 2004

This study aims to measure an apparent mass of a seated human body at the sitting posture in a passenger car in the frequency range from 1 to 20 Hz and to investigate the dynamic characteristics. Thirty subjects joined the test where eight levels of acceleration from $0.1m/s^2\;to\;2.0m/s^2$ were used to excite seated human body. Most of apparent mass curves showed two peaks in the frequency range of $4\sim9Hz$, first peak was clearer at the contact point of the seat and the hip, and the second one at the contact point of the backrest and the back. Both peak frequencies were found to move down to lower frequencies with increase of acceleration magnitude. Shapes of apparent mass curves were clearly different from those at erect posture especially in the frequency range around and above the second peak.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.136-152
• /
• 2008

The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.6
• /
• pp.765-772
• /
• 2012

Objective: The purpose of this research was to aid creating an effective sizing system for the vacation wear intended for Jeju's medical tourists, specifically females from the major countries including the USA, Japan, and Korea. Background: Medical tourism makes the gains of every year 40,000,000,000 dollar, every year 30% it is increasing. Thus the Jeju-do is propelling medical tourism. The body size each country is different. Consequently must set the body size standard for the women. Method: (1) It observed the body size of the Korean women of 2004 years and 2010 years. (2) It analyzed the body size of the women of the USA, China, Japan and Korea. (3) It set the sizing system of the women of the USA(ASTM), China (GB), Japan(JIS) and Korea(KS). Results: Korean adult females' height in 2010 has increased from 2004. The Waist Back Length, Waist Front Length, Arm Length etc has also increased along with the Height. The upper body has become slimmer at the same time; the Chest Circumference, Bust Circumference, and Underbust Circumference have decreased. The lower body on the other hand has become bigger: the Waist Circumference and Hip Circumference have increased. The BMI has decreased by 0.4 from 2004 - the Height has increased while Weight has decreased. The Chest Circumference and Under Bust Circumference of Korean women across all age groups have increased at a proportional rate to other parts of body; however, the rate of increase in Chest Circumference was far greater. American females(Caucasians) had the greatest ratio of waist to bust (Waist Circumference/Chest Circumference), smallest ratio of Neck Base Circumference to Bust Circumference (neck/bust). Korean females had smallest ratio of Waist Circumference to Underbust Circumference(waist/bust). As for the drop of Chest Circumference and Waist Circumference, American females had the highest and Koreans had the lowest. As for the drop of Hip Circumference and Chest Circumference, Japanese had the highest and Americans had the lowest, but Japanese women at the same time showed the A line body shapes. As for difference of Chest Circumference and Underbust Circumference, American females had the biggest(13.73) followed by Korean(11.1), Japanese(10.9) and Chinese(10.5). Conclusion: The women of the USA, China, Japan and Korea body size is different. Especially the value of the Bust Circumference - the Underbust Circumference is different. Thus, it set the sizing system(Table 8).