• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.1603-1605
• /
• 2013

산업과 정보통신 기술의 발전으로 토목분야도 GIS, DBMS 등 다양한 정보시스템을 도입하여 국가 발전의 선구자 역할을 주도 하고 있다. 토목분야 중에서 우리 생활과 밀접한 관계가 있는 도로 포장관리시스템(PMS)에도 보다 효율적이고 체계적인 도로포장 관리를 위해 GIS 및 DBMS를 운용하고 있다. 전국 일반국도 포장상태 조사 및 자료 검증의 경우 DBMS를 통해 포장 상태 산출과 평가 신뢰성이 확보되어 효율적 예산 배치 및 정확한 포장상태 관리의 기반이 된다. 본 논문에서는 GIS 기반의 전국 일반 국도 포장상태 조사 지점 관리 및 자료 검증 시스템 개발에 대하여 기술하고자 한다.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.35-46
• /
• 2018

PURPOSES : The purpose of this study is to compare the lane curing time of natural drying and a lane drying device when painting lines on a highway. METHODS : The painting process was carried out in July 2015 and September 2015, respectively, for the Gimcheon IC - Gimcheon JC. After the painting, measurements were obtained three times at six measurement points located at 20 m intervals on the shoulder line and the dividing line. The curing time was measured for natural drying and drying using a lane drying device, and compared for different pavement types (asphalt, concrete) and paint types (waterborne paint, methyl methacrylate paint). RESULTS : The results of the lane curing time comparison on the highway are as follows. The combination of asphalt and methyl methacrylate paint cured more rapidly during both the natural drying and drying using the lane drying device. Finally, it was cured at least 32.2% and 40.7% faster when using a drying device than in natural drying. CONCLUSIONS : The comparison of lane curing time of the highway showed that the combination of asphalt and methyl methacrylate paint cured more rapidly when using both natural drying and a lane drying device.

• 한국물환경학회지
• /
• 제23권1호
• /
• pp.38-45
• /
• 2007

A one-dimensional kinematic wave model was used to calculate temporal and spatial changes of the highway runoff. Infiltration into pavement was considered using Darcy's law, as a function of flow depth and pavement hydraulic conductivity ($K_p$). The model equation was calculated using the method of characteristics (MOC), which provided stable solutions for the model equation. 22 storm events monitored in a highway runoff monitoring site in west Los Angeles in the U.S. were used for the model calculation and evaluation. Using three different values of $K_p$ ($5{\times}10^{-6}$, $10^{-5}$, and $2{\times}10^{-5}cm/sec$), total runoff volume and peak flow rate were calculated and then compared with the measured data for each storm event. According to the calculation results, $10^{-5}cm/sec$ was considered a site representative value of $K_p$. The study suggested a one-dimensional method to predict hydrodynamic behavior of highway runoff, which is required for the water quality prediction.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.1-10
• /
• 2014

PURPOSES : This study aimed to evaluate the long-term performance of bonded concrete overlay in Korean Highway, and factors influencing the performances. METHODS : The evaluation for long-term performance of bonded concrete overlay is investigated based on the following study : i) The pavement distress of number of bonded concrete overlay sections in Korean highway are collected through field measurement, and PCI for each section is calculated. ii) Performance of LTPP data of bonded concrete overlay sections in U.S.A is analysed. And it is compared with bonded concrete overlay of Korean highway. iii) An analysis of the factors influencing to long-term performance of bonded concrete overlay is investigated. RESULTS : Performance analysis was confirmed that the overlay thickness was affecting significantly on the Bonded Concrete Overlay life. The comparison of LTPP data(U.S.A) and field measurement data(Korean) was showed. CONCLUSIONS : It was showed that the performance of Korean bonded concrete overlay is relatively lower than that of the bonded concrete overlay in U.S.A. The cause of lower performance can be explained by the lack of overlay thickness.

• 전산구조공학
• /
• 제4권2호
• /
• pp.95-102
• /
• 1991

콘크리트 포장도로의 일부구간에서 보이고 있는 심각한 균열파괴현상은 주하중인 차량하중외에 환경요소인 온도변화의 영향으로, 콘크리트 슬래브 상, 하면의 온도차이에 따라 위, 아래방향으로 오목하게 휘면서, 기초지반과 떨어지는 슬래브의 중앙 또는 줄눈부에 차량하중이 재하되어 발생된다. 이로 인하여 콘크리트슬래브에 종적, 횡적 균열이 발생하여 Faulting, Ravelling, Spalling, Scaling..등 파괴 현상이 심화되고 있다. 따라서 본 연구에서는 유한요소법을 이용한 강성행렬과 온도변화, 건조수축등으로 인한 등가절점하중을 유도하여 전국 여러지방의 온도변화 특성에 따른 역학적 거동현상을 연구하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.127-132
• /
• 2002

While the pavement design is based on mechanical property such dynamic elastic modulus, the quality of highway subgrade during construction is controled by the optimum moisture content(OMC) and maximum dry density(${\gamma}$$\_$dmax/). However, since the quality control based on the OMC and maximum dry density does not consider the mechanical characteristics, there is a conceptional gap between design and PMS(pavement management system). Therefore, it is necessary to develope a new qualify control system using mechanical property for highway construction in more rational way. To achieve this goal, it is planned to perform various laboratory tests to collect mechanical properties of subgrade soil samples from several highway construction sites and to propose the relationship between dry unit weight (or OMC) and mechanical parameters. In this paper, the experimental data so far obtained are presented and analyzed. In addition, further research plan is presented and discussed.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.67-72
• /
• 2014

PURPOSES : This study focuses on conducting pavement rehabilitation for more deteriorated roads given a limited government budget. METHODS : Therefore, we apply a optimization programming model of the permutation algorithm used for rehabilitating more deteriorated pavement areas, which is subjected to the limited budget. RESULTS : The permutation algorithm was evaluated in terms of determining the maximized rehabilitation of deteriorated pavement areas, using the newly developed performance models such as fatigue cracking, rutting, international roughness index(IRI) through the surveying data from 2006 to 2012. When compared with a traditional model of the so-called worst-first sequence(WFS) method, the permutation algorithm worked better than the WFS method, resulting in covering more deteriorated pavement areas given the limited government budget. CONCLUSIONS : Through a case study, it could be concluded that the permutation algorithm provides more reliable results in terms of rehabilitating more deteriorated pavement areas given the limited budget.

• Journal of Construction Engineering and Project Management
• /
• 제7권1호
• /
• pp.30-36
• /
• 2017

Most local agencies such as counties and small cities continuously express difficulties in making technically and financially defensible decisions on their pavement infrastructure maintenance and rehabilitation. Unlike pavement systems managed by state highway agencies, the total lane-miles of many local pavements are significantly short and they are managed by a limited number of staff who typically have multiple responsibilities. Most local agencies also do not have historical pavement performance data and the lack of a systematic decision making framework exacerbates the problem. A structured framework and an easily accessible decision support tool that reflects their local requirements, practices and operational conditions would greatly assist them in making consistent and defensible decisions. This study fills this gap by developing a systematic pavement treatment selection framework and a spreadsheet based tool for local agencies. It is expected that the proposed framework will significantly help local agencies to improve their pavement asset management practices at the project level.

• 한국농공학회지
• /
• 제34권1호
• /
• pp.66-77
• /
• 1992

A prototype probabilistic approach to thickness design for asphalt pavement surface course was developed using first-order second moment probability model. The tensile strain (load effect) developing at the bottom of surface layer due to the wheel load and the critical strain (resistance) of asphalt concrete were used as random variables for pavement reliability analysis. Based on the parameters for load effect and resistance data collected from reference and field, simulated data were generated by Monte Carlo method for reliability evaluation of the pavement for a typical rural highway. Thickness of pavement surface course was defined in terms of target reliability of the pavement, growth factor of traffic, design life of pavement and resistance of the asphalt concrete to be placed on the pavement. According to these rationales, prototype thickness design chrats were sugested through example studies. From these, similar design charts can be developed for many pavements if appropriate data and target reliability are determined.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.55-63
• /
• 2004

효율적인 포장의 관리를 위해서 포장상태를 객관적으로 평가하는 포장평가지수의 사용은 필수적이다. 현재 사용되고 있는 PSI, MCI, UPCI는 사용자나 관리자의 입장만을 각각 고려하여 종합적인 포장평가지수의 역할을 못하고 있는 실정이다. 따라서 본 논문에서는 기존 평가지수들의 문제점을 파악하고 이를 개선한 새로운 포장평가지수를 개발하였다. 또한 개발된 평가지수로 실제 포장자료를 이용하여 포장재료의 성질에 따른 지수의 민감도 분석을 실시하였다. 표층두께, 아스팔트점도, 아스팔트함량의 순서로 포장평가지수에 영향을 주었다.