• ETRI Journal
• /
• v.38 no.1
• /
• pp.90-99
• /
• 2016

In this work, we investigate differentially encoded blind transceiver design in low signal-to-noise ratio (SNR) regimes for orthogonal frequency-division multiplexing (OFDM) signaling. Owing to the fact that acquisition of channel state information is not viable for short coherence times or in low SNR regimes, we propose a time-spread frequency-encoded method under OFDM modulation. The repetition (spreading) of differentially encoded symbols allows us to achieve a target energy per bit to noise ratio and higher diversity. Based on the channel order, we optimize subcarrier assignment for spreading (along time) to achieve frequency diversity of an OFDM modulated signal. We present the performance of our proposed transceiver design and investigate the impact of Doppler frequency on the performance of the proposed differentially encoded transceiver design. To further improve reliability of the decoded data, we employ capacity-achieving low-density parity-check forward error correction encoding to the information bits.

• Korean Institute of Interior Design Journal
• /
• v.22 no.1
• /
• pp.174-182
• /
• 2013

This study divided the observation area in an indoor space for area setup to analyse the effect of the difference of design types on the characteristics of observation with the observed time of each area as objects. Though it is thought that the difference of design patterns may be influenced by the factors and material composing the space, no existing approaches have had any quantitatively measuring method. Eye-tracking could be efficiently utilized for observation analysis from the viewpoint of dating observation behavior. The followings are the results of analysing the observation characteristics depending on design pattern. First, 5 observing areas were set up according to concentration of observation time in order for the concentration by area to be examined and the factors of design having effect on the difference of observation patterns by design type could be analysed. Second, as a whole, the observation of modern types showed high observation characteristics. When the difference of observation characteristics by pattern was examined by difference at observation frequency, the observation frequency defined to be more than 50% was seen to be almost same from Area I to III and to get higher from Area IV, and that defined to be 30% was high at Areas III and IV. In Area V, it was very high at natural. Third, that of Area II is no more than 8.2% but had the most observation time. As for observation characteristics, the horizontal observation of the central part was the highest and had more observation frequency at modern type that at natural one. These observation characteristics by area enabled to analyse the observation tendency depending on design characters at relevant area. Fourth, the design factors composing natural type were found to bring more attention when the area showed higher concentration at natural type than at modern one. And the analysis of design factors could make it to be confirmed that the quality of material and background factors in addition to design factors in the area had more effect on sight concentration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.112-119
• /
• 2002

We propose an enhanced wavelet packet image coder algorithm which is based on the coefficients partition. The proposed wavelet packet image coder uses the first-order entropy to reduce the total compression time, and achieves low bit rates and rate-distortion performance by the zero-tree based coding using correlations between coefficients partition. This new algorithm represents new parent-children relationships for reducing image reconstruction error using the correlations between each frequency subbands and then the wavelet packet coefficients are Partitioned by a new order. The computer simulations demonstrate higher PSNR under the same bit rate and improved image compression time and enhanced rate control compare with conventional algorithms. From the simulation results, it is shown that the encoding and decoding process of proposed coder are much simple and accurate than present method against texture images , which include many mid-frequency elements.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.4
• /
• pp.206-212
• /
• 2013

Self-excited pulse jet is a specific nozzle with a closed chamber which can change a continuous jet into a pulse one. Energy of the pulse jet can be output not only unevenly but also with multifrequency. With the peak pressure of pulse jet, the hitting power would be 2~2.5 times higher than that of continuous jet. In order to reveal the correlation between the self-excited pulse frequency and nozzle diameter ratio, nozzle spacing and operating pressure, the model of 3D unsteady cavitation model has been used. We found that with the same nozzle structure parameters and the different operating pressure, the self-excited frequency and the width of peak crest are different, but the wave profiles are similar. With FFT, we also found that the less bandwidth of amplitude in low frequency range will lead to the wider wave crest of outlet velocity in its time domain, and the larger force of the strike will be gained. By studying the St of self-excite nozzle, not only the frequency of a certain nozzle can be predicted, but also a nozzle structure with a certain frequency can be designed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.516-518
• /
• 1990

We have derived the equation which involves the variation of electron energy with time in a lowly ionized plasma when a low alternating electric field is applied. We consider only elastic collisions between electrons and neutral atoms. This equation is solved using the 4th-order Runge-Kutta method, and applied to argon gas discharge which is driven by source frequency of 100, 1K, 10K, 100K, and 1M (Hz). The results show that the variation of electron energy becomes flat with higher frequencies.

• Journal of Korean Academy of Nursing
• /
• v.46 no.3
• /
• pp.400-408
• /
• 2016

Purpose: This study was done to identify frequency, intensity of urinary dysfunction and daily life distress in women after a radical hysterectomy for cervical cancer. Methods: One hundred and fifty seven women who had undergone a radical hysterectomy and one hundred and sixty five women as healthy controls completed questionnaires on intensity of urinary dysfunction and daily life distress caused by urinary dysfunction. Results: Women with cervical cancer showed higher frequency of urinary dysfunction than healthy controls. Major urinary dysfunction for women with cervical cancer in order of frequency were night-time incontinence (odds ratio=10.39, p<.001), difficulty in starting urination, weak urine stream and sense of incomplete emptying of bladder. The highest score on intensity was difficulty in starting urination, followed by urgency, weak urine stream, daytime frequency and sense of incomplete emptying. Night-time incontinence was the urinary symptom causing the most daily life distress for cervical cancer women followed by difficulty in starting urination, urgency, sense of incomplete emptying, and night-time frequency. Conclusion: Results suggest that nurses should address the potential postoperative urinary complications and develop long term interventions to decrease urinary dysfunction and daily life distress for women who have had a radical hysterectomy for cervical cancer.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.306-320
• /
• 2010

Modern ultra-large container carriers can be exposed to the unprecedented springing excitation from ocean waves due to their relatively low torsional rigidity. Large deck opening on the deck of container carriers tends to cause warping distortion of hull structure under wave-induced excitation, eventually leading to the higher chance of resonance vibration between its torsional response and incoming waves. To handle this problem, a higher-order B-spline Rankine panel method and Vlasov-beam FE model was directly coupled in the time domain, and the coupled equation was solved by using an implicit iterative method. In order to capture the complicated behavior of thin-walled open section girder, a sophisticated beam-based finite element model was developed, which takes into account warping distortion and shear-on-wall effect. Then, the developed beam model was directly coupled with the time-domain Rankine panel method for hydrodynamic problem by using the fixed-point iteration method. The developed computational scheme was validated through the comparison with the frequency-domain solution on the container carrier model in linear springing regime.

• Advances in aircraft and spacecraft science
• /
• v.10 no.2
• /
• pp.179-202
• /
• 2023

This article presents a numerical analysis to investigate the natural frequencies and harmonic response of a perforated cantilever beam attached to two layers of piezoelectric materials by using the finite element method for the first time. The bimorph piezoelectric is composed of 3 layers; two of them at the outer are piezoelectric, and the inner isotropic material. A higher order 3-D 20-node solid element that exhibits quadratic displacement behavior is exploited to discretize the isotropic layer, and coupled piezoelectric 3D element with twenty nodes is used to mesh the top and bottom layers. CIRCU94 element is added to act as a resistor part of the model. The proposed model is validated with previous works. The numerical parametric studies are presented to illustrate the effects of perforation geometry, the number of rows, the resistance on the natural frequencies, frequency response, and power. It is found that the thickness has a positive relationship with the natural frequency. Perforations help in producing higher voltage, and the best shape is rectangular perforations, and to produce higher voltage, two rows of rectangular perforations should be applied.

• Advances in nano research
• /
• v.13 no.1
• /
• pp.29-45
• /
• 2022

The optimization for dynamic response associated with a cylindrical shell which is made of laminated composites embedded in a piezoelectric layer which is subjected to temperature rises and is resting on an elastic foundation is investigated for the first time. The first shear order theory (FSDT) is utilized in order to obtain the strain relations of the shell. Then, using the energy method, the equations of motions as well as boundary condition of the problem are attained. The formulation of this study together with the solution procedure which is a numerical solution method, differential quadrature method (DQM) is validated using other researches. This paper presents a thorough study on the parameters which impacts the vibration frequency of the laminated shell. The results of this paper shows that any type of laminated composite shell can reduce the vibration frequency providing that the angle related to layer are higher than 85 degrees. Also, in order to reduce the effect of temperature rises, the laminated composites instead of orthotropic one can be used.