• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.463-469
• /
• 2018

A currently used roof green system with multi layers has a low constructability. Therefore a new integrated waterproof & root barrier sheet and roof green box unit system was developed using steel plate fixture and cone type fixture by electromagnetic induction heating method. This study was proceeded to evaluate adhesion performance of two types of fixtures on Engineering PE, TPO, PVC sheet in a normal condition, repeated heating and cooling condition. As a result, adhesion load on Engineering PE sheet showed the highest value. The adhesion loads of steel plate fixture showed higher value as heating temperature was getting higher. However adhesion loads of cone type fixture showed opposite tendency. Regarding to the test conditions, test results of normal condition, repeated heating and cooling condition showed same value. The cone type fixture using butyl tape showed 7 times lower adhesion load than that of cone type fixture using electromagnetic heating and 28% lower adhesion load in a repeated heating and cooling condition than a usual condition.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.299-307
• /
• 2016

In order to clarify the availability of heat treatment for catechu dyeing, effect of color developing by heating process on cotton fabrics dyed with catechu extract was investigated. Dyed fabrics were heated various time(min) at $150^{\circ}C$. The cases of non-mordanting and mordanting were compared, and examined the effect of sodium acetate as an agent to promote the color developing to fabrics. Experiments with after-mordanting method showed that various colors can be obtained using catechu. K/S values of dyed fabrics with Al, Cu, Fe mordant were higher than the case of no mordant. The fabric by Cu mordanting showed 3 times to the case of no mordant. Fabrics dyed with catechu by mordanting lowered $L^*$ value while there was little change in $a^*$, $b^*$ value as the heating process progressed. Therefore, K/S values were increased due to heating process. The effects of adding sodium acetate in dyeing bath on dyed fabrics were shown higher K/S values, and the $L^*$ values were lower than those without sodium acetate according to heating time increase. The result show sodium acetate had a promoting effect on the color developing to the fabrics by heating process, it was very effective.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1815-1820
• /
• 2008

The aim of this study was to extract chicken leg bone, which is a by-product of industrial poultry processing, using different heating temperatures (80, 90 and $100^{\circ}C$) and durations (5, 10 and 15 min). The pH value, soluble protein content, peptide content and antioxidative properties, including superoxide anion scavenging ability, 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging ability, reducing capacity and inhibitory activity of linoleic acid peroxidation, were measured. The results showed no significant differences (p>0.05) in pH value among all treatments. Decreased soluble protein content and peptide content were observed in chicken leg bone extract obtained under higher heating temperatures (90 or $100^{\circ}C$) and longer heating durations (10 or 15 min). In antioxidative properties, the extracts which were heated at 90 or $100^{\circ}C$ for 15 min exhibited significantly higher superoxide anion scavenging ability, DPPH free radical scavenging ability, reducing capacity and inhibitory activity of linoleic acid peroxidation (p<0.05).

• Journal of the Korean Solar Energy Society
• /
• v.33 no.1
• /
• pp.48-56
• /
• 2013

Energy consumption analysis of multi-family apartment is an important area of research for the design of energy-saving housing. In this study, we selected a universal type of Flat-type apartments and analyzed the heating energy consumption of variables such as U-value, G-value, infiltration rate, heating setpoint and boiler efficiency with EnergyPlus and eQUEST. With these results, we identify the characteristics of EnergyPlus and eQUEST and provided base data for the design of energy-saving housing. The results indicate that infiltration rate is the most important factors to consider. And eQUEST heating energy consumption is approximately 10% higher compared to the EnergyPlus under same condition.

• Journal of Food Hygiene and Safety
• /
• v.24 no.1
• /
• pp.12-18
• /
• 2009

This experiment was conducted to investigate the effect of wa-song (Orostachys japonicus A. Berger) extracts on the oxidative stability of edible oil. Wa-song was dried from hot air (HWE) and freeze (FWE), and then they were extracted by hot water. The different levels (0.1, 0.5 and 1.0 g/100 mL) of HWE and FWE were added to soybean oil and lard. The chromaticity of edible oils was generally increased with prolonged heating time and HWE was higher than FWE. The anisidine value showed significant increase during heating for 48hrs. After heating for 48 hrs, it was lower than control, except for HWE added sample of 0.5 and 1.0 g/100 mL, FWE added sample of 1.0 g/100 mL. In lard, it was lower in sample added wa-song extract than control. The acid value was not significant by added amount of wa-song. Its value in HWE added sample was lower than FWE, after heating for 48 hrs. POV was lower HWE than FWE, also. After heating for 24 hrs, TBA values in soybean oil containing HWE and FWE added sample was lower than control. In lard, its value in HWE and FWE added sample was lower than control during heating for $12{sim}48\;hrs$. Therefore, those results suggested that HWE has higher antioxidant activity than FWE added sample, and then oxidative stability of HWE in edible oil was more potential for lard during its heating.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.73-79
• /
• 2018

In this study, a torrefaction unit with a capacity of 50 kg/hr was developed and experimented to produce of solid fuel by reuse of the food and agricultural wastes. Dried food wastes and agricultural wastes were used for the experiments and the heated-air torrefaction characteristics were investigated by the raw materials, torrefaction air temperature, and torrefaction time. For the dried agricultural wastes, measured torrefaction capacity and lower heating values were 55.35 kg/hr and 3,333 kcal/kg, respectively. As the lower heating values of the treated samples were greater, by around 7.8%, than those of the non-treated samples, torrefaction process was a very effective method to increase the heating value of the agricultural waste. In case of the dried food waste, torrefaction capacity and lower heating value was measured 88.27 kg/hr and 4,016 kcal/kg, respectively. As the lower heating value of treated ones showed around 9.0% higher than that of non treated ones, torrefaction process is very effective method to increase the heating value of the agricultural waste also. It will be assumed that the heating value shows more higher as increase the air temperature and decrease the moisture content of torrified matter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3307-3314
• /
• 2012

The annual energy demand of the standard rural house models was analyzed using the DesignBuilder. Indoor temperature set-point, U-value of outer wall, type of window, and degree of ventilation were selected as simulation parameters. In all the simulation cases, heating energy demand was higher than cooling energy demand regardless of the building size. When the lower U-value of the outer wall was applied to account for the thicker insulation layer, heating energy demand was decreased while cooling energy demand was increased. However, it is better to reduce the area of outer wall which is directly exposed to outdoor air because reducing the U-value of the outer wall is not effective in decreasing heating energy demand. Among the four different window types, the double skin window is most favorable because heating energy demand is the lowest. For a fixed infiltration rate, higher ventilation rate resulted in an increased heating energy demand and had minor impact on cooling energy demand. As long as the indoor air quality is acceptable, lower ventilation rate is favorable to reduce the annual energy demand.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.28-33
• /
• 2015

In this study, a dual fuel engine fueled with natural gas and diesel was tested to investigate the effects of heating value variation of CNG fuel. CNG substitution rate which is defined as the ratio of CNG and diesel supplied in a heating value basis was fixed at 80%. The higher heating value was varied from $10,400kcal/Nm^3$ to $9,400kcal/Nm^3$ by mixing nitrogen gas with pure CNG and diesel fuel was injected at a fixed injection timing. The engine test results showed that thermal efficiency and power output were decreased as the heating value of mixed CNG fuel was decreased. And the peak cylinder pressure was also decreased but the ignition delay time and the combustion duration and timing were almost same.

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.9-16
• /
• 2010

This pilot study evaluated fueling feasibility of sewage sludge, which contains a large amount of water content, by applying melting of thermoplastic polyethylene (PE). This study has identified a simultaneous achievement of drying and heating value improvement of the sewage sludge. The sewage sludge collected from a sewage sludge treatment plant during a winter period had a water content of 83.7 wt%, a combustible volatile content of 12.5 wt%, and an ash content of 3.8 wt%. The higher heating value (HHV) of the dried sewage sludge, before impregnation or coating of PE, was 4,600 kcal/kg. The collected sewage sludge was immersed into the melted PE solution, which had a HHV of 11,070 kcal/kg, and kept immersing with increasing reaction time. As the reaction (immersing or coating or impregnation) time increased, the water content of the sludge decreased. However, the HHV of the sludge increased with increasing the reaction time. The HHVs of the sewage sludge immersed or dipped into the melted PE solution for 15 min ranged from 6,780 to 8,170 kcal/kg with water content less than 7 wt%. This result indicates the melted PE solution can be utilized as an improvement technology for dryness and heating value of the sewage sludge with high water content. The sewage sludge impregnated or coated with melted PE can be utilized as potential fuel or energy resources.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.4
• /
• pp.184-191
• /
• 2004

In order to improve the performance of a 2 room heat pump with a constant speed compressor, the optimum refrigeration circuit of the heat pump with different cooling and heating capacities is developed by applying capillary tubes. The refrigeration circuit is composed of four parts; a heating circuit, a cooling circuit, a by-pass circuit and a balance circuit. The performance of the 2 room heat pump are investigated from a rating experiment and a reliability experiment, using the calorimeter. Results of the rating experiment show that the capacity of heat pump is about $93\%$ of the design value. In particular, the capacity of the cooling single operation is about $13\%$ higher than the design value, and the capacity of the heating multi operation is about $5\%$ higher than the design value. From the reliability experi-ment, it is found that the lowest driving voltage of the compressor is about $75\%$ of the rating voltage. Also the compressor is reoperated normally under the flood back and the over load.