• Advances in concrete construction
• /
• 제5권4호
• /
• pp.345-358
• /
• 2017

This paper describes the experimental investigation carried out to develop geopolymer concrete using rice husk ash (RHA) along with alccofine. The study reports the fresh and hardened properties of the geopolymer concrete (GPC) activated using alkaline solution. GPC were prepared using different RHA content (350, 375 and $400kg/m^3$), the molarity of the NaOH (8, 12 and 16M). The specimens were cured at $27^{\circ}C$ and $90^{\circ}C$. GPC was activated using NaOH, $Na_2SiO_3$, and alccofine. Prepared GPC samples were tested for compressive and splitting tensile strengths after 3, 7 and 28 days. RHA was suitable to produce geopolymer concrete. Results indicate that behavior of GPC prepared with RHA is similar to fly ash based GPC. Workability and strength can be improved by incorporating the alccofine. Further, alccofine and heat curing improve the early age properties of the GPC. Heat curing is responsible for the initial polymerization of GPC which leads to high workability and improved mechanical properties of the GPC. High strength can be achieved by using the high concentration alkaline solution in terms of molarity and at elevated heat curing. Further, RHA based geopolymer concrete has tremendous potential as a substitute for ordinary concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.77-80
• /
• 1999

Before the field applications, several basic laboratory test were the characteristics of workability and strength of the concrete containing CSA expansive additive. As a result, high strength concrete using CSA expansive additive show similar workability and compressive to that of plain concrete, the optimum replacement ratio of them to plain concrete were obtained for CSA expansive additive 10%. On the other hand, it can be concluded that the use of CSA component is effective to prevent shrinkage crack reducing concrete using superplasticizer and to achive volume stability of concrete structure.

• 자원리싸이클링
• /
• 제25권3호
• /
• pp.20-28
• /
• 2016

산업부산물을 사용한 친환경 초고성능 콘크리트(Ultra-high performance concrete, UHPC)의 시공성 확보를 위해 요구되는 초유동화제의 적정 혼입량을 검토하였다. UHPC에 적용한 산업부산물은 고로슬래그 미분말, 화력발전소 바텀애시, 급랭 슬래그였다. 일반적인 UHPC에 사용되던 기존 재료를 산업부산물로 부분 혹은 전량 치환한 배합에, 다양한 초유동화제 혼입량을 적용하였다. 부산물 사용에 의해 UHPC의 유동성이 개선되었으며, 이 때 초유동화제 혼입량을 감소시킨 경우에도 유동성 및 압축강도의 저하는 발견되지 않았다. 부산물 사용 및 초유동화제 혼입량 감소로 인해 UHPC의 재료 가격이 감소함을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.27-32
• /
• 2021

본 연구는 시멘트계 건설재료의 작업성 증진을 위하여 나노버블수의 사용을 시도하였다. 사용된 나노버블수는 약 750 nm의 입경을 지닌 나노버블이 7% 포함된 배합수를 사용하였다. 초고성능콘크리트, 경량시멘트 복합체, 고강도 모르타르 등 다양한 시멘트 복합체에 나노버블수가 배합수로서 사용될 때 미치는 영향을 실험하였다. 작업성을 대표할 수 있는 플로우 값이 시편에 따라 3-22%정도 증진됨을 확인하였다. 하지만 압축강도에는 큰 영향을 미치지 않는 것으로 확인되었다. 따라서 재료의 굳은 성질에 큰 영향 없이 시멘트 복합체의 작업성을 증진시킬 수 있는 새로운 방법으로 나노버블수의 사용이 다양한 시멘트 복합체에 활용될 수 있음을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.89-94
• /
• 1999

The workability of high strength concrete using high range water reducing admixture is varied rapidly according to elapsed time. For using the high strength concrete in situ, careful caution on workability is necessary. By using fly ash as a admixture, the slump loss of concrete can be reduced considerably, but the early strength of concrete used fly ash is smaller than that not used fly ash. For the purpose of elevating the utilization of fly ash on high strength concrete, the high fluidity retention and the strength development in early age are necessary in concrete used fly ash. In this study, to improve the fluidity retention and to acquire strength development on concrete used fly ash, the gypsum is applied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.107-110
• /
• 2006

The purpose of this study is to suggest a reference data for the development of high workable and normal strength concrete using Polycarboxylate superplasticizer and granulated blast furnace slag as concrete admixtures. So in this study, it is quantitatively evaluated the workability, compressive strength, the heat of hydration and dry shrinkage of high workable concrete on normal compressive strength($21{\sim}27MPa$) for the practical use in construction field. As a result of this study, it is appeared that the performance of high workable and normal strength concrete is superior than that of ready-mixed concrete of the same strength through the B/P tests in the plants.

• Advances in concrete construction
• /
• 제15권6호
• /
• pp.405-417
• /
• 2023

While ultra-high performance concrete (UHPC) is commonly reinforced with micro straight steel fibers in existing applications, studies have indicated that the use of deformed steel macro-fibers leads to enhanced ductility and post-peak responses for UHPC structural elements, which is of particular importance for earthquake-resistant structures. However, there are potential concerns regarding the use of UHPC reinforced with macro-fibers due to the issues of workability and fiber distribution. The objective of this study was to address these issues by extensively investigating the restricted and non-restricted deformability, filling ability, horizontal and vertical velocities, and passing ability of UHPC containing macro hooked-end steel fibers. A new approach is suggested to examine the homogeneity of fiber distribution in UHPC. The influences of ultra-fine fillers and steel macro-fibers on the workability of fresh UHPC and the mechanics of hardened UHPC were examined. It was found that although increasing the ratio of quartz powder to cement led to an improvement in the workability and tensile strain hardening behavior of UHPC, it reduced the fiber distribution homogeneity. The addition of 1% volume fraction of macro-fibers in UHPC improved workability, but reduced its compressive strength, which is contrary to the effect of micro-fiber inclusion in UHPC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.84-87
• /
• 1995

Production of high strength concrete requires a low water-cement ratio and this leads to the high cement content. Mineral admixture like fly ash(FA) is often cheaper than ordinary portland cement(OPC) and this factor in combination with possible improvement in workability and moderation of the heat evolution of the cement-rich mixes tends to encourage its use. The other mineral admisture that its use has been widly advocated is silica fume that increases compressive strength due to its pozzolanic reaction. The objective of this study is to assess the contribution of mineral admixtures(FA, SF) to the workability and the strength of concrete with low water-binder ratios. In this experimental study that investigates and analyzes the properties of fresh concrete. it is presented that using admixtures like flyash and silica fume as binding material increases properties of high strength flowing concrete having very low water cementitious ratios of 0.25 and 0.30.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.29-34
• /
• 1990

Energy cries and availability have funded extensive research and numerous conferences. So, the idea of adding slags and pozzolans such as flyash to portland cement or portland cement concrete is widely practiced because it helps to reduce cost and conserve energy, resources and the environment. Recently, Silicafume which is the industrial by-product of electric arc furnaces is also widely studied for achieving high strength concrete. It is the aim of this study to provide the fundamental data on the workability and engineering proper of high strength concrete containing flyash and silica fume comparing with plain concrete for the practical use and research data accumulation of a new technique for achieving high strength concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.5-10
• /
• 1993

Recently, owing to efficiency of the concrete work and the rationalization of construction structures, concrete is required to be super high strength. Furthermore, it is take a growing interest in execution and manufacture for super high strength concrete. This study is to investigate and analyze the influenced of flyash affecting on workability and engineering properties of super high strength concrete. In this experiment, the 28day's compressive strength of concrete using 15mm size of aggregate and flyash is over 800㎏/㎠ in the 20°/wt of water∼cement ratio. And the concrete using flyash have higher tensile strength than plain concrete.