• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.235.2-235.2
• /
• 2015

The front transparent conductive oxide (TCO) films must exhibit good transparency, low resistivity and excellent light scattering properties for high efficiency amorphous silicon (a-Si) thin film solar cells. The light trapping phenomenon is limited due to non-uniform and low aspect ratio of the textured glass [1]. We present the low cost electrochemically deposited uniform zinc oxide (ZnO) nanorods with various aspect ratios for a-Si thin film solar cells. Since the major drawback of the electrochemically deposited ZnO nanorods was the high sheet resistance and low transmittance that was overcome by depositing the RF magnetron sputtered AZO films as a seed layer with various thicknesses [2]. The length and diameters of the ZnO nanorods was controlled by varying the deposition conditions. The length of ZnO nanorods were varied from 400 nm to $2{\mu}m$ while diameter was kept higher than 200 nm to obtain different aspect ratios. The uniform ZnO nanorods showed higher haze ratio as compared to the commercially available FTO films. We also observed that the scattering in the longer wavelength region was favored for the high aspect ratio of ZnO nanorods and much higher aspect ratios degraded the light scattering phenomenon. Therefore, we proposed our low cost and uniform ZnO nanorods for the high efficiency of thin film solar cells.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.47-58
• /
• 2000

Transmittances of SiO2 and ZrO2 thin films, made by the electron beam evaporation method, were measured with a spectrophotometer to be used in determining their optical constants and thicknesses in the envelop method. New color glass lenses with high transmittance, which now can be manufactured in the industry, was successfully designed by using these constants. Also the vacuum evaporator could be mechanically corrected with these constants as correction factors.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.194-197
• /
• 2006

One novel electrode-architecture has been adapted to fabricate transparent OTFTs. The device has more than 70% transmittance, yet reminds high performance. Furthermore, we also use transfer line method to prove that the device performance enhancement indeed contributes from the reduction of the contact resistances. It is anticipated that the transparent OTFTs would be very suitable to be the driving circuits for liquid crystal displays (LCDs).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.308-309
• /
• 2015

선형 이온빔 적용 플라즈마 표면처리 기술 및 코팅 공정을 통해서 고경도 투명 박막 형성 연구를 수행하였다. 플라즈마 전처리를 통해서 박막과 기판 사이의 밀착력을 향상시키고, advanced linear PECVD와 advaced plasma source를 적용하여 SiOxNy계의 박막을 형성하였다. 그 결과 투과도 92 % 이상, 표면 경도 6.3~6.9 GPa 이상의 고경도 투명 박막을 개발하였다. 본 연구 공정을 바탕으로 고경도의 투명 보호 필름 및 투명 디스플레이에 응용이 가능할 것으로 기대된다.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.629-635
• /
• 2010

Abstract In this study characteristics of Al-doped ZnO thin film by HIPIMS (High power impulse sputtering) are discussed. Deposition speed of HIPIMS with conventional balanced magnetic field is measured at about 3 nm/min, which is 30% of that of conventional RF sputtering process with the same working pressure. To generate additional magnetic flux and increase sputtering speed, electromagnetic coil is mounted at the back side of target. Under unbalanced magnetic flux from electromagnet with 1.5A coil current, deposition speed of AZO thin film is increased from 3 nm/min to 4.4 nm/min. This new value originates from the decline of particles near target surface due to the local magnetic flux going toward substrate from electromagnet. AZO film sputtered by HIPIMS process shows very smooth and dense film surface for which surface roughness is measured from 0.4 nm to 1 nm. There are no voids or defects in morphology of AZO films with varying of magnetic field. When coil current is increased from 0A to 1A, transmittance of AZO thin film decreases from 80% to 77%. Specific resistance is measured at about $2.9{\times}10-2\Omega{\cdot}cm$. AZO film shows C-axis oriented structure and its grain size is calculated at about 5.3 nm, which is lower than grain size in conventional sputtering.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1132-1136
• /
• 2004

In this paper, we intend to make FFS mode cell with LC alignment used non-rubbing method, ion beam alignment method on the a-C:H thin film, to analyze electro-optical characteristics in this cell. We studied on the suitable inorganic thin film for FFS-LCD and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film as working gas at rf bias condition. A high pretilt angle of about 5$^{\circ}$ by ion beam(IB) exposure on the a-C:H thin film surface was measured. An excellent voltage-transmittance (V-T) and response time curve of the ion-beam-aligned FFS-LCD was observed with oblique ion beam exposure on the DLC thin films.

• 한국결정성장학회지
• /
• 제29권3호
• /
• pp.123-131
• /
• 2019

본 연구에서는 $TiO_{2-x}$ 산화물 박막공정을 이용한 유해 자외선차단 투명 유연 소재를 개발하고자한다. 자외선 차단 특성: 자외선 파장대의 315 nm 차단율이 95 % 이상이면서, 자외선차단특성을 갖으면서 투명성을 높인 가시광선 투과율 78 % 이상(550 nm에서 전광투과율)의 시료를 만드는 공정기술을 개발하고자 하였다. 본 연구 결과로 고성능 자외선차단 박막의 유연 소자 공정조건을 확립하고, 이질성 특성의 투명 유연 소자의 혼합형 설계와 시장 요구에 다양하게 대응이 가능한 복합 증착 기술 정립, 롤투롤(roll-to-roll) 연속 공정의 실현 및 장비, 공정 국산화 기술 확립으로써 관련 산업으로의 기술 파급 효과가 클 것으로 사료된다.

• 한국전자통신학회논문지
• /
• 제18권6호
• /
• pp.1067-1072
• /
• 2023

본 연구에서는 본 연구에서는 펄스 레이저 증착법으로 기판온도에 따른 AZO(Al₂O₃ : 3 wt %)박막을 제작하여, 구조적 특성과 전기적 및 광학적 특성을 조사하였다. 기판온도 400℃ 에서 증착한 AZO박막에서 가장 우수한 (002) 배향성을 나타내었으며, 이때의 반가폭은 0.42° 였다. 전기적 특성을 조사한 결과, 기판온도가 상승함에 따라 캐리어 농도와 이동도는 증가하였고 비저항은 감소하였다. 가시광 영역에서의 평균 투과도는 기판온도에 상관없이 85% 이상의 높은 값을 나타내었고, 기판온도에 상승함에 따라 캐리어 농도가 증가하고 이로 인해 에너지 밴드갭이 넓어지는 Burstein-Moss효과도 관찰할 수 있었다. 기판온도 400℃ 에서 증착한 AZO박막의 비저항과 재료평가지수는 각각 6.77 × 10^-4 Ω·cm 과 1.02 × 10⁴ Ω^-1·cm^-1 로 가장 우수한 값을 나타내었다.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.19-24
• /
• 2006

ZnO:Al(AZO) films prepared by rf magnetron sputtering on glass substrate and textured by post-deposition chemical etching were applied as front contact and back reflectors for ${\mu}c$-Si:H thin film solar cells. For the front transparent electrode contact, AZO films were prepared at various working pressures and substrate temperature and then were chemically etched in diluted HCl(1%). The front AZO films deposited at low working pressure(1 mTorr) and low temperature ($240^{\circ}C$) exhibited uniform and high transmittance ($\geq$80%) and excellent electrical properties. The solar cells were optimized in terms of optical and electrical properties to demonstrate a high short-circuit current.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.826-830
• /
• 2015

Transparent Ag nanowire conducting thin films with high surface hardness were fabricated by bar coating method. When coating speed was changed from 35 mm/sec to 50 mm/sec, the transmittance of coated glass increased from 65.3% to 80.8% in visible light range and the surface resistance was changed from $10.1{\Omega}/sq$ to $23.3{\Omega}/sq$. The surface hardness and adhesion of thin film were 5H and 5B.