• 한국환경성돌연변이발암원학회지
• /
• 제16권2호
• /
• pp.109-116
• /
• 1996

To study the effect of dietary $\omega 6/\omega 3$ fatty acid ratios on the preneoplastic lesions and lipid peroxidation in rat hepatocellular chemical carcinogenesis, placental glutathione S-transferase(GST-P) positive foci area and numbers, glucose 6-phosphatase(G6Pase) activity, thiobarbituric acid reactive substances (TBARS) were measured. Male Sprague-Dawley rats were fed 5 different diets-low $\omega 6/\omega 3$ ratio with fish oil (Low-F), low $\omega 6/\omega 3$ ratio with perilia oil(Low-P), moderate ratio with perilia oil(Moderate), blend of 10 different commercial fats and oils(High-BL) and high $\omega 6/\omega 3$ ratio(High)-for 8 weeks. Hepatocarcinogenesis was induced by modified Ito model. The area of GST-P positive loci was the lowest in Moderate group and in ascending order of Low-F < Low-P < High-BL < High. But statistically, only Moderate and High groups were significantly different. The number of GST-P positive foci showed the same trend as foci area. The activities of G6Pase, membrane stability marker, were increased as $\omega 6/\omega 3$ ratio decreased. Lipid peroxidation values (TBARS) were the lowest in Low-F group and it is significantly different from Moderate, High-BL and High groups. When dietary $\omega 6/\omega 3$ ratio was moderate(4.06), hepatocarcinogenesis was suppressed compared with high or low $\omega 6/\omega 3$ ratios. Blend fat, commonly consumed among Koreans, did not show any suppressive effect on carcinogenesis because of high ratio(6.7). These results suggest that dietary $\omega 6/\omega 3$ ratio influences hepatocellular chemical carcinogenesis. It is recommended that appropriate $\omega 6/\omega 3$ ratio should be around 4.0. and we recommend to use more $\omega 3$ fatty acid in food preparation to reduce the risk of hepatocarcinogenesis.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.294-296
• /
• 2005

Several duplex overlaied-weldments which have different ferrite ratio were prepared by changing welding heat input ant post weld heat treatment were carried out to understand the effect of the ferrite ratio on the precipitation during post weld heat treatment. High heat input weldment indicated low ferrite ratio, while low heat input weldment has high ferrite ratio. Low ferrite ratio weldment showed much and faster precipitation. But high ferrite ratio weldment showed less and slower precipitation.

• Journal of Magnetics
• /
• 제20권2호
• /
• pp.186-192
• /
• 2015

This paper describes the electromagnetic and mechanical characteristics of coaxial magnetic gear (CMG) with a low gear ratio. The analysis models are restricted to a CMG with a gear ratio of less than 2. The electromagnetic characteristics including transmitted torque and iron losses are presented according to the variation of the gear ratio. The pole pairs of high speed rotor are chosen as 6, 8 and 10 by considering the torque capability. As the gear ratio approaches 1, both iron losses on the ferromagnetic materials and eddy current losses on the rotor permanent magnets are increased. The radial and tangential forces on the modulating pieces are calculated using the Maxwell stress tensor. When the maximum force is exerted on the modulating pieces, the mechanical characteristics including stress and deformation are derived by structural analysis. In CMG models with a low gear ratio, the maximum radial force acting on modulating pieces is larger than that in CMG models with a high gear ratio, and the normal stress and normal deformation are increased in a CMG with a low gear ratio. Therefore, modulating pieces should be designed to withstand larger radial forces in CMG with a low gear ratio compared to CMG with a high gear ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.85-88
• /
• 2006

This study describes the optimum mix proportion of the high strength and self-compacting concrete placed in main structures of LNG above tank. This concrete requires high strength level about $60{\sim}80MPa$, low hydration heat, balance between workability and consistency without vibrating in the actual work. For this purpose, low heat portland cement and fly ash are selected and design factors including water-binder ratio, replacement ratio of fly ash are tested. As experimental results, low heat portland cement shows lower the confined water ratio than another cement type and the optimum replacement ratio of fly ash in order to improve properties of the binder-paste shows 10% by cement weight considering test results of the confined water ratio$({\beta}p)$. Also, flowability of the high strength and self-compacting concrete by using fly ash about $10{\sim}20%$ is improved. The replacement ratio of fly ash 10% and water-binder ratio $25{\sim}27%$ are suitable to the design strength 80MPa and cost, In case of the design strength 60MPa, the replacement ratio of fly ash and water-binder ratio show 20% and $25{\sim}30%$ separately. Based on the results of this study, the optimum mix proportions of the high strength and self-compacting concrete will be applied to the construction of LNG above tank as a new type.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.645-654
• /
• 2019

In this paper, a new high step up DC/DC converter with a modified super-lift technique is presented. The coupled inductor technique is combined with the super-lift technique to provide a tenfold or more voltage gain with a proper duty cycle and a low turn ratio. Due to a high conversion ratio, the voltage stress on the semiconductor devices is reduced. As a result, low voltage ultra-fast recovery diodes and low on resistance MOSFET can be used, which improves the reverse recovery problems and conduction losses. This converter employs a passive clamp circuit to recycle the energy stored in the leakage inductance. The proposed convertor features a high conversion ratio with a low turn ratio, low voltage stress, low reverse recovery losses, omission of the inrush currents of the switch capacitor loops, high efficiency, small volume and reduced cost. This converter is suitable for renewable energy applications. The operational principle and a steady-state analysis of the proposed converter are presented in details. A 200W, 30V input, 380V output laboratory prototype circuit is implemented to confirm the theoretical analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 1998

Recently, extending the local broadcasting and increasing lots of informations. The low-loss communication cable is required in proportion as frequency .The reason of transportation loss causes to using the high frequencies like hundreds of MHz or decades of GHz. For the low transportation loss. It is required the developing-technology of foaming and the high foamed insulator with the dielectric ratio of the nearest to 1. Therefor, there is the purpose of developing the insulating materials for the low dielectric ratio. Also it is important to measure the attenuation, which is one of the important parameters.sa the evaluation of transportation characteristic with frequency in the communication cable. In this paper,the result showed that the dielectric ratio(1.4) of the nearest to 1 and low attenuation with high frequency were very related to the transportation and reflection characteristics such as propagation velocity (82.27%). Delay time and voltage standing wave ratio(VSWR).

• Journal of Nutrition and Health
• /
• 제27권10호
• /
• pp.967-978
• /
• 1994

This study was done to investigate the effect of age and dietary linolenic acid content and the linolenic acid/linoleic acid(LNA/LA) ratio on the lipid metabolism and formation of PGI2 and TXA2. The male Sprague-Dawley rats were fed 6 different with 0.2, 0.4, 0.6 of LNA/LA ratio within either 8% LNA(high LNA) or 4% LNA(low LNA) of fatty acid content for different feeding period(1, 4, 12 month). The dietary fat used were sesame oil, perilla oil, soybean oil and beef tallow. The concentration of serum total lipid, total cholesterol and HDL-C were increased with aging. Triglyceride concentration was decreased in 0.2 ratio of LNA/LA. The lipid content of liver showed similar tendency to that of serum. The ratio of PGI2/TXA2 was increased in 1 month rats and antithrombotic effect was reduced significantly with increasing age. The PGI2/TXA2 ratio was tended to be higher in diet of 0.2 and 0.4 LNA/LA ratio at high LNA level and in diet of 0.6 LNA/LA ratio at low LNA level. Especially PGI2/TXA2 ratio was increased linearly with rising LNA/LA ratio at low LNA level. It seemed that the LNA content and LNA/LA ratio had interaction to increase the antithrombotic effect bychanging TXA2 synthesis. And the dietary fatty acid related effect lowering the serum and liver lipid content, excepting triglyceride, was increased when dietary n3/n6 ratio was high(0.6) at both high and low n3 level. Therefore, it could not be recommended to consume large amount of n3 fatty acid or high ratio of n3/n6 to prevent cardiovascular diseases. These results suggested that the dietary fatty acid ratio of n3/n6 could be determined based on the n-3 content of dietary fat to reduce the risk of cardiovascular disease.

• Journal of Ship and Ocean Technology
• /
• 제12권3호
• /
• pp.14-25
• /
• 2008

Recently, there has been a serious effort to design a wing in ground effect (WIG) craft. Vehicles of this type might use low aspect ratio wings defined as those with smaller than 3. Design and prediction techniques for fixed wings of relatively large aspect ratio are reasonably well developed. However, Aerodynamic problems related to vortex lift on wings of low aspect ratio have made it difficult to use existing techniques. In this work, we firstly focus on understanding aerodynamic characteristics of low aspect ratio wings and comparing the results from experimental measurements and currently available numerical predictions for both inviscid and viscous flows. Second, we apply an improved numerical method, "B-spline based high panel method with wake roll-up modeling", to the same problem.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.121-126
• /
• 2008

This paper analyzes the losses of a Steinmetz connection three-phase induction motor which is supplied by a single-phase source. The T-type equivalent circuit which is taken no-load losses into account is used to determine phase converter capacitive reactances at starting and rated speed by using the condition of the minimum voltage unbalance. The starting and the operating capacitor are replaced at the slip of the same voltage unbalance factor points which are depicted using two capacitive reactances. The operation characteristics are investigated by comparing with those of three-phase balanced operation to find the feasibility of single-phase operation. To analyze the losses of this motor, the output power decrease factor(OPDF), the loss ratio(LR), the no load loss ratio(NLLR), the copper loss ratio(CLR), the stator copper loss ratio(SCLR), and the rotor copper loss ratio(RCLR) are defined and simulated in the whole slip range. The simulated results show that OPDF is maintained almost uniformly, LR is low at low speed and high at high speed, CLR is higher !ban NLLR, but CLR varies concavely and NLLR varies convexly at high speed, SCLR is low at low speed and high at high speed, but SCLR varies convexly at high speed, and RCLR is nearly opposite to SCLR.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.843-852
• /
• 2005

Presently, test results and stress-strain models for poorly confined high-strength columns, more specifically for columns with a tie volumetric ratio smaller than $2.0\%$, are scarce. This paper presents test results loaded in axial direction for square reinforced concrete columns confined by various volumetric ratio lateral ties including low-volumetric ratio. Test variables include concrete compressive strength, tie yield strength, tie arrangement type, and tie volumetric ratio. Local strains measured using strain gages bonded to an acryl rod. For square RC columns confined by lateral ties, the confinement effect was efficiently improved by changing tie arrangement type from Type-A to Type-B. A method to compute the stress in lateral ties at the concrete peak strength and a new stress-strain model for the confined concrete are proposed. Over a wide range of confinement parameters, the model shows good agreement with stress-strain relationships established experimentally.