• 항공우주기술
• /
• 제6권2호
• /
• pp.180-187
• /
• 2007

KSLV-I의 경우 1단은 액체 추진기관으로 구성되어 있으며, 2단은 킥모터(Kick Motor ; KM)를 이용하게 된다. 작동고도가 높고 확장비가 큰 KM을 지상에서 연소시험 할 경우 배압이 상대적으로 크기 때문에 노즐에서 박리가 발생되고 모터는 실제 추력 값보다 낮게 추력을 발생 시키며 노즐에서 극심한 진동을 유발 시키므로 지상에서 고공환경을 모사할 수 있는 고공환경모사 시험설비가 꼭 필요하다. 본 논문은 KSLV-I 2단 추진기관인 킥모터 개발을 위한 고공환경모사 시험설비 구축을 위해 기본설계를 진행하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.17-18
• /
• 2013

To minimize construction of nuclear facility, it is required to reduce reinforcing bar amount and solve reinforcing bar concentration and for this, it is necessary to develop appication design technology and modular of high strength reinforcing bar. Hence, KHNP reduces excessive reinforcing bar amount which can cause possibility of poor construction of concrete through design standard development and modular of nuclear facility structure using high strength reinforcing bar to raise economics and has its purpose to maintain high-level safety and durability as they are. This study is to introduce application method for the Rebar Modulation of High-Strength Reinforcing Bars to the Nuclear Power Plant Structures.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.513.1-513
• /
• 2001

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.263-269
• /
• 1996

A comprehensive scaling method is proposed for a scaled-down facility simulating SBLOCA in the CARR passive reactor (CP-1300). The present method consists of two stages: scaling methodology, and validation of scaling methodology and code. The present scaling methodology is based on the integral response scaling method. Through sensitivity study, the condensation of the top of the CMT is identified as one of the little-known phenomenon with high importance which should be addressed for the applicability of the code. Using the similarity of the derived scaling parameters, the major component geometries of the scaled-down facility are determined. In the case of 1/4 height and 1/100 area ratio scaling, it is found out that the power ratio is the same as the area ratio, and the present scaling methodology generates the design parameters of the scaled-down facility without any distortion.

• 대한인간공학회지
• /
• 제16권2호
• /
• pp.101-122
• /
• 1997

Our recent work on virtual environments and virtual displays is reviewed, including our efforts to establish the Virtual Environment Research, Interactive Technology, And Simulation (VERITAS) facility and our research on spatial hearing. VERITAS is a state-of -the-art multisensory facility, built around the ${CAVE}^{TM}$ technology. High-quality 3D audio is included and haptic interfaces are planned. The facility will support technical and non-technical users working in a wide variety of application areas. Our own research emphasizes the importance of auditory stimulation in virtual environments and complex display systems. Experiments on auditory-aided visual target acquistion, sensory conflict, sound localization in noise, and loxalization of speech stimuli are discussed.

• 유기물자원화
• /
• 제27권1호
• /
• pp.57-64
• /
• 2019

유입하수와 기존 연계처리수(축산폐수, 분뇨, 음폐수 등)에 더하여 슬러지탄화시설에서 발생되는 유출수가 추가로 유입되며 질소성분의 처리에 어려움을 겪고 있는 하수처리시설을 대상으로 연계처리가 처리효율에 미치는 영향을 조사하였다. 하수처리시설에 유입되는 연계처리수의 부하량(kg/d)을 산출한 결과, BOD 및 COD의 경우 음폐수와 축산폐수가 차지하는 비중이 상대적으로 크게 나타났고, T-N과 $NH_3-N$은 탄화공정수가 차지하는 비중이 가장 큰 것을 확인할 수 있었다. 탄화공정수가 방류수질에 미치는 영향을 분석하기 위하여 탄화공정수 유입 유무에 따른 공정별 처리효율을 분석결과, 호기조에서 $NH_3-N$의 질산화율이 탄화공정수가 유입되지 않는 경우 89%이었으나 탄화공정수가 유입되는 경우 55%로 낮아져 탄화공정수 유입시 질산화효율이 현저히 떨어지는 것을 확인하였다. 탄화공정수 유입으로 인한 질소 및 암모니아 부하량 증가 및 이로 인한 제거율 악화를 해결하기 위해서는 탄하공정수의 전처리를 통해 질소성분의 부하를 낮추어야 할 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.278-280
• /
• 2013

To minimize construction quantity of nuclear facility, it is required to reduce reinforcing bar amount and solve reinforcing bar concentration and for this, it is necessary to develop application design technology and modular of high strength reinforcing bar. Hence, KHNP reduces excessive reinforcing bar amount which can cause possibility of poor construction of concrete through design standard development and modular of nuclear facility structure using high strength reinforcing bar to raise economics and has its purpose to maintain high-level safety and durability as they are.

• 신재생에너지
• /
• 제16권1호
• /
• pp.68-76
• /
• 2020

Operational testing of the THIOPAQ^® facility that removes H₂S from landfill gas was performed for 746 days. The average H₂S removal efficiency was 99.4%, and the input quantities of air, NaOH, and nutrients per sulfur load were 13.1 ㎥/ton, 1.5 ㎥/ton, and 28.7 L/ton, respectively. The purity of the bio-sulfur produced from the facility was 94.8%, with 3.3% impurities, except for moisture. X-ray photoelectron spectroscopy showed that the compositional contents of amino acids and free amino acids of the bio-sulfur surface were 5,308 and 728 mg/kg, respectively. The mean particle size was 3.41 ㎛, which was much smaller than that of chemical sulfur. Based on these results, a high H₂S removal rate of more than 97% is feasible, and high value-added bio-sulfur, which is used as a fungicide because of its hydrophilic characteristics and small size, can be obtained at this facility.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3505-3516
• /
• 2021

During nuclear facility decommissioning, workers are continuously exposed to high-level radiation. Hence, adequate path planning is critical to protect workers from unnecessary radiation exposure. This work discusses recent development in radioactive path planning and the algorithms recommended for the task. Specifically, we review the conventional methods for nuclear decommissioning path planning, analyze the techniques utilized in developing algorithms, and enumerate the decision factors that should be considered to optimize path planning algorithms. As a major contribution, we present the quantitative performance comparison of different algorithms utilized in solving path planning problems in nuclear decommissioning and highlight their merits and drawbacks. Also, we discuss techniques and critical consideration necessary for efficient application of robots and robotic path planning algorithms in nuclear facility decommissioning. Moreover, we analyze the influence of obstacles and the environmental/radioactive source dynamics on algorithms' efficiency. Finally, we recommend future research focus and highlight critical improvements required for the existing approaches towards a safer and cost-effective nuclear-decommissioning project.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2113-2115
• /
• 2000

It is necessary to install the arc generation facility in order to obtain the important technology for the design of breakers and switches, and for the improvement of their performance and reliability. With this facility, it is possible, to study the characteristics of Arc in air/gas/vacuum insulation environment. The facility briefly consists of capacitor bank which can charge enormous energy, an air-core reactor, experimental arc-chamber, and several measurement equipments. This facility can simulates the arc phenomena in breakers and switches by means of generating high currents. In order to study the arc phenomena in SF6 gas and vacuum and to test the quenching performance of the extinguishing chambers which are developing. we made experimental $SF_6$gas/vacuum chambers and measured several parameter's of chambers. And besides we visualized arc ignition and arc movement by means of high speed camera.