• Annual Conference of KIPS
• /
• 2021.11a
• /
• pp.756-759
• /
• 2021

본 논문은 기존의 5축 치아가공기나 반도체장비등에 사용하고 있는 회전형 모터의 경우는 엔코더와 리졸버를 사용하고 있다. 엔코더와 레졸버는 고가이므로 실제 산업현장에서 전동기의 위치 센서로는 적용하기가 힘들다. 또한 엔코더와 레졸버와 같은 광학식 위치센서는 그 크기와 내구성에 있어 약점이 있기 때문에 취부 할 때에도 어려움이 있다. 따라서 본 연구에서는 5축치아가공기에 적용하기 위해서 자석가동자를 만들었으며, 이러한 문제점을 해결하는 방안으로 리니어모터를 고정자로 하고 자석플레이트를 이동자로 하는 시스템과 별도의 리니어 스케일을 배제하고 기존의 정현파를 발생하는 2개의 리니어홀센서 및 영구자석을 이용하여 가동자의 절대위치와 이동 위치를 검출할 수 있는 리니어 모터 및 그 제어방법, 안정성 및 신뢰성을 향상시킬 수 있는 자석가동자를 이용하여 구동시 실시간으로 데이터를 확인할 수 있고 제어할 수 있는 모니터링 시스템을 개발하는 연구이다.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• Korean Journal of Materials Research
• /
• v.16 no.5
• /
• pp.285-291
• /
• 2006

Copper powders have been widely used in electrically conductive coatings, electrode materials et al. and are very prospective since they are cheaper than noble metal powders such as silver or palladium. In this study, copper powders for metal filler of EMI shielding have been prepared using a solvothermal process from $CuSO_4$, NaOH, Glucose, mixed solvent ($H_2O$: Ethanol) and hydrazine which was used as a reducing agent at various reaction conditions. The prepared copper powders showed finely dispersed spherical shape without agglomerate, uniform morphology, narrow size distribution, high purity and were about 400-700 nm in size. The prepared powders were characterized using XRD, SEM, TGA, XPS, particle size measurement and EMI shielding efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.125-128
• /
• 2007

In these recent years, low cost and stable battery electrode materials have been studied for HV/HEV application. Spinel cathode material $LiMn_2O_4$ is widely studied as a promising cathode material of lithium ion secondary batteries because of it is low cost, easily to be prepared and capable to be operated in high voltage range. In this study, $LiMn_2O_4$ was undergoing surface modification with spinel lithium titanium oxide by sol-gel method in order to enhance its capacity retention. Properties of both unmodified and surface-modified $LiMn_2O_4$ were characterized by XRD, SEM, particle size analyzer while their cycling performance was tested with charge and discharge tester.

• Natural Product Sciences
• /
• v.2 no.1
• /
• pp.37-42
• /
• 1996

Several species and varieties of Allium spp. grown in Indonesia were screened for their in vitro antiplatelet aggregation activities. The extracts were also analyzed by GC for their volatile sulfur-containing compounds, and measured for their Volatile Reducing Substances (VRS) contents. Antiplatelet aggregation potencies of Allium spp. were varied among the species and varieties studied. Garlic extracts showed the greatest ability to inhibit platelet aggregation followed by extract of shallot, chive, yellow onion, and green onion. The 'Jawi' and 'local Padang' variety of garlic showed high activities with $IC_{50}$ values of 9.1 and $9.8\;{\mu}g/ml$, respectively. The local Kupang variety of shallot showed the highest antiplatelet activity among the shallot varieties evaluated, with an $IC_{50}$ value of $111\;{\mu}g/ml$. Antiplatelet aggregation activities of Allium extracts showed a positive correlation with the level of volatile compounds.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.521-528
• /
• 2002

Rotary and plow implements are mainly utilized for the tillage operation in Korea, and a implement control system for agricultural tractors was designed and fabricated to improve the working accuracy and efficiency. The control system was composed of three units: 1) sensors fur detection of angle of liftarm, draft force, engine rpm, tillage depth and so on, 2) a controller, and 3) hydraulic circuits, which included solenoid valves and so on, for operation of three point linkage and implements. The control system can control the speed(high and low speed) of implements by adjusting input flow rates of the hydraulic cylinder which was controled by two speed valve, which was composed of a solenoid valve and a orifice. Indoor experiments were conducted to evaluate response characteristics of the designed implement control system under experimental conditions of various engine nm, two kinds of input flow rates of the cylinder and some input frequency. The results of experiments showed the response characteristics sufficient to use as the implement control system fur agricultural tractors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.305-305
• /
• 2008

LTCC는 고주파영역에서 손실이 낮고 적층구조의 모듈제작이 가능하여 고주파용 모듈제작에 응용이 가능하다. 최근 수동소자가 내장된 ASM이나 FEM 등의 모듈은 그 집적도가 높고 기판의 두께가 감소함에 따라 소재의 고강도 특성이 요구되고 있다. 이와 같은 경향에 따라 Anorthite계 결정화 유리로 알려진 300MPa 이상의 고강도를 나타내는 CaO-Al2O3-SiO2계 소재가 선행 연구 과정을 통하여 개발되었다. 본 실험에서는 기 개발된 조성의 고강도 소재를 이용하여 RF부품에 적용하기 위한 테스트 쿠폰을 제작하였다. 고강도 소재를 이용하여 green sheet를 제조하고 수동소자인 R, L, C 등을 기판 내에 내장화 하기위해 LTCC 공정을 이용하여 각 층에 다양한 선폭 및 크기의 패턴을 인쇄한 뒤 적층하여 $900^{\circ}C$에서 소결하였다. 이 과정에서 공정에 대한 적용성이 각 공정별로 평가되었으며 완성된 테스트 쿠폰을 이용하여 소재의 전기적인 특성을 평가하였다.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.4
• /
• pp.323-328
• /
• 2020

Direct injection of genome editing tools such as CRISPR/Cas9 system into developing embryos has been widely used to generate genetically engineered pigs. The approach allows us to produce pigs carrying targeted modifications at high efficiency without having to apply somatic cell nuclear transfer. However, the targeted modifications during embryogenesis often result in mosaicism, which causes issues in phenotyping founder animals and establishing a group of pigs carrying intended modifications. This study was aimed to establish a genomic PCR and sequencing system of a single blastomere in the four-cell embryos to detect potential mosaicism. We performed genomic PCR in four individual blastomeres from four-cell embryos. We successfully amplified target genomic region from single blastomeres of 4-cell stage embryo by PCR. Sanger sequencing of the PCR amplicons obtained from the blastomeres suggested that PCR-based genotyping of single blastomere was a feasible method to determine mutation type generated by genome editing technology such as CRISPR/Cas9 in early stage embryos. In conclusion, we successfully genotyped single blastomeres in a single 4-cell stage embryo to detect potential mosaicism in porcine embryos. Our approach offers a simple platform that can be used to screen the prevalence of mosaicism from designed CRISPR/Cas9 systems.

• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1459-1478
• /
• 2020

In the last few years, quantum communication technology and services have been developing in various advanced applications to secure the sharing of information from one device to another. It is a classical commercial medium, where several Internet of Things (IoT) devices are connected to information communication technology (ICT) and can communicate the information through quantum systems. Digital communications for future networks face various challenges, including data traffic, low latency, deployment of high-broadband, security, and privacy. Quantum communication, quantum sensors, quantum computing are the solutions to address these issues, as mentioned above. The secure transaction of data is the foremost essential needs for smart advanced applications in the future. In this paper, we proposed a quantum communication model system for future ICT and methodological flow. We show how to use blockchain in quantum computing and quantum cryptography to provide security and privacy in recent information sharing. We also discuss the latest global research trends for quantum communication technology in several countries, including the United States, Canada, the United Kingdom, Korea, and others. Finally, we discuss some open research challenges for quantum communication technology in various areas, including quantum internet and quantum computing.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.91-96
• /
• 2002

This study was carried out to estimate the property of dimensional stability of heat compression of italian poplar wood with low density. Firstly, two levels of pressure conditions were applied using the closed and open-press system. The thermal treatment temperatures were 180℃ and 200℃, respectively. Water absorption tests were conducted in water bath at 25℃ and 100℃ for 35 hours and 1 hour, respectively. The compression rates of wood were 47 percent, 60 percent, and 73 percent, respectively. From these tests, it was found that the dimensional stability of the closed-press system was superior to that of the open-press system. Furthermore, the dimensional stability of compressed wood in the closed-press system was better at 200℃ than 180℃. In compression rate, dimensional stability of 73 percent compression rate was the best result. Considering these results, the best conditions for the dimensional stability of compressed wood were those of the closed-compressing system at high temperatures above 200℃ and larger compression rate. Therefore, it was concluded that the dimensional stability of wood is improved at higher temperature and larger deformation.