• Resources Recycling
• /
• v.31 no.5
• /
• pp.42-51
• /
• 2022

Aggregate resources in Korea are expected to run out owing to an increase in development demand and construction investment. Recycled concrete aggregates (RCA), extracted from waste concrete, have a lower quality than natural aggregates. However, RCA can produce concrete similar in quality to the normal concrete by aggregate pretreatment, use of admixtures, and quality control. RCA are most suitable for use in precast concrete products such as sidewalk blocks and revetment blocks. Herein, the feasibility of producing revetment blocks using recycled aggregate concrete (RAC), similar in quality to normal concrete, was analyzed. The amount of RCA was varied, and moderate high early strength cement and steam curing were used to produce the concrete test blocks. In the block test, the load resistance characteristics of the blocks were evaluated to determine optimal RAC and glass fiber reinforced polymer (GFRP) rebar compositions. Thus, the variable that reduced the cement content was determined at the same level as that of natural aggregate concrete by the control of steam curing. In the concrete block test, although this depends on the reinforcement ratio, the RAC block exhibited the same or better performance than a normal concrete block. Therefore, the low quality of RCA in RAC is no longer a problem when concrete mixing and curing are controlled and appropriate reinforcement is used.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.607-616
• /
• 2022

Corrosion and degradation of reinforced structures due to abnormal climates and natural disasters further accelerate the aging of structures. Coping with the decrease in structure performance, many old structures are being repaired and reinforced with low-weight and high-strength materials such as glass fiber composite material (GFRP). To further contribute, this paper focus on a more economical and eco-friendly material, basalt fiber composite (BFRP), which provide a more effective lateral constraint effect for seismic reinforcement. The main variables considered in this study are the curing temperature during the manufacturing of BFRP and the material characteristics of the target concrete member. The lateral constraint reinforcement effect was investigated through the evaluation of the performance of normal concrete and those with improved durability through fiber reinforcement. The reinforcement effect was 3.15 times for normal concrete and 3.72 times for fiber reinforced concrete, and the difference in reinforcement effect due to the improvement of the durability characteristics of the compression member was not significant. Lastly, the performance of the BFRP was compared with the results of the GFRP reinforcement from the previous study. The effect of the BFRP reinforcement was 1.18 times better than that of the GFRP reinforcement.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.12-18
• /
• 2022

Korea depends on the import of raw materials such as iron ore and coal for the steel industry. These raw materials have a major impact on the cost, productivity, and quality competitiveness in the global steel industry. To secure the competitiveness of steel companies, it is necessary to reduce the country's dependence on raw materials. This can be achieved using byproducts with a high Fe content, which are primarily generated by the steel industry. These byproducts are available in the form of a very fine powder, which can disperse as dust when used directly in plant processes. Dust dispersion has a negative impact on the environment and can lead to the loss of raw materials. To enable the use of a wide range of Fe-containing byproducts, it is necessary to pretreat them in the form of larger aggregates such as pellets and briquettes. There are several methods to achieve such aggregates. There are two ways to produce briquettes: using a hot briquette, which supplies additional heat to produce briquettes, or using a cold briquette, which does not use heat. A method for producing cold briquettes using Fe-containing byproducts was investigated in this study. The yield ratio and briquette strength were examined under various manufacturing conditions.

• Journal of Naturopathy
• /
• v.9 no.2
• /
• pp.62-70
• /
• 2020

Purpose: According to the Body-EU education program, this study investigates changes after conducting education with ten subjects with autism symptoms (disability level 2~3) 63 times (126 hours) for nearly two years. Methods: Body-EU habit practice, note writings discussion, singing, Bible study, question and communication, class arrangement, etc., a total of 63 times were educated for 2 hours each week. Results: Subjects felt comfortable breathing and improved energy. Other subject's habit of an out-toed gait step and bending back alleviated. One subject made it easier to speak, so if talking with no strength. When breathing, the stuffy nose improved, the eyes became calm, and the hands and feet were warm. Subject felt like my head was cleaned. Heart tightness disappeared. Subject felt at ease as gaining confidence. The subject gained confidence in seeing whoever the other person was. The subject's pronunciation became more sophisticated, with more confidence, and his mouth cramping alleviated. Subjects with right eye movements showed a relatively high concentration in education time. Conclusions: Subjects are educated and trained in making general habits of their body from morning to going to bed. This study was a research program for ordinary people, but it confirmed with autism. Whether it was genetic autism or acquired autism, they could be somewhat relieved.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3250-3259
• /
• 2022

A new approach to the use of rice straw as a difficult-to-recycle agricultural waste was proposed. Potassium aluminosilicate was obtained by spark plasma sintering as an effective material for subsequent immobilization of ¹³⁷Cs into a solid-state matrix. The sorption properties of potassium aluminosilicate to ¹³⁷Cs from aqueous solutions were studied. The effect of the synthesis temperature on the phase composition, microstructure, and rate of cesium leaching from samples obtained at 800-1000 ℃ and a pressure of 25 MPa was investigated. It was shown that the positive dynamics of compaction was characteristic of glass ceramics throughout the sintering. Glass ceramics RS-(K,Cs)AlSi₃O₈ obtained by the SPS method at 1000 ℃ for 5 min was characterized by a high density of ~2.62 g/cm³, Vickers hardness ~ 2.1 GPa, compressive strength ~231.3 MPa and the rate of cesium ions leaching of ~1.37 × 10^-7 g cm^-2·day^-1. The proposed approach makes it possible to safe dispose of rice straw and reduce emissions into the atmosphere of microdisperse amorphous silica, which is formed during its combustion and causes respiratory diseases, including cancer. In addition, the obtained is perspective to solve the problem of recycling long-lived ¹³⁷Cs radionuclides formed during the operation of nuclear power plants into solid-state matrices.

• Journal of Naturopathy
• /
• v.11 no.2
• /
• pp.85-92
• /
• 2022

Background: Research is necessary to enhance the mental health of psychiatric unit nurses and the quality of nurse services. Purpose: This study was to obtain primary data for enhancing the psychological well-being of psychiatric nurses by investigating the factors that affect them. Methods: This study was conducted as a descriptive research study. The study period was from February 18 to March 31, 2019, with the subjects being 150 psychiatric nurses working in the ward of a psychiatric hospital in Gyeongnam. We used questionnaires on job stress measurement, the Korean version of the interpersonal response index, resilience scale, and psychological well-being. The collected data were analyzed using the SPSS program. Results: The subjects' levels of the job stress, empathy, resilience, and psychological well-being ranged from 2.34 to 3.33 points. The level of recovery resilience and well-being according to the subject's characteristics is 40 years or older, married, religious, ten years of nurse experience, above average economic level, psychiatric qualifications, senior nurse or higher, resilience education. All participants were significantly (p < .001). Conclusions: In this study, psychological well-being increased as the job stress was low and empathy and resilience were high. Therefore, it should make a proper education program to improve the strength and well-being of psychiatric nurses.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.349-359
• /
• 2022

At present, with the diversified development of the global economy, the trade of cultural products has become an important factor affecting the competition of comprehensive strength among countries. As a neighboring country to China, South Korea has a similar cultural development environment to China. As an important pillar of South Korea's economy, cultural product trade, its development experience has reference significance for China. This paper adopts literature research method, comparative analysis method and empirical analysis method to conduct research. The article firstly analyzes the export level of China and South Korea from the scale of the import and export of cultural products, and finds the difference between the import and export of cultural products between the two countries. Then, it compares and analyzes the insufficiency of China's cultural product trade structure and the advantage of Korea's cultural product trade structure. Finally, this paper uses the stochastic frontier gravity model to conduct empirical analysis and draws relevant conclusions about the trade potential of cultural products between China and South Korea. The research results show that: (1) the international competitiveness of cultural products trade in China and South Korea is relatively high, but the competitiveness of China's cultural products has been improved slowly; (2) compared with South Korea, China's cultural product exports are affected by trade inefficiency factors larger. (3) The improvement of government efficiency has a great effect on reducing the inefficiency of trade in China.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.262-269
• /
• 2021

This paper conducts an evaluation of the structural performance of the lap splice detail of SD700 headed bar experiment for developing an RC beam with different depths joint details. The experiment variable is lap splice length, yield strength, and end anchorage of main reinforcements. For all specimens, a headed bar was applied to the main reinforcement of the beam with low depth (B2), and the beam with high depth (B1) was applied to the main reinforcement with two splice methods: straight headed bar and 90° hooked-headed bar. The experimental results were that specimens of applying SD500 and SD600 had the results of flexural fracture at the lap splice location, which maximum load was similar. For specimens of appling SD500, the 90° hooked-headed bar of B1, suppressed horizontal cracks in the lap splice section compared to the straight headed bar. Specimens of applying an SD 700 headed bar had the results of brittle anchorage failure. In addition, maximum load was increased with the lap splice length increasing. For specimens of applying SD700 headed bar, test for test maximum load/theoretical load for test development length/design development length were estimated to be 1.30~1.48 for the ACI 318-19 equation, and 1.14~1.30 for the KDS-2021 equation. Thus, ACI 318-19 equation had conservatively greater safety factors as estimated development lengththened.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.1
• /
• pp.42-49
• /
• 2022

In this study, the surface protection film based on organic-inorganic composite is manufactured for suppressing lithium dendrite growth, and the film is applied on the surface of Li metal negative electrode for lithium metal batteries (LMBs). The film is consist of the polyvinylidene fluoride (PVDF) polymeric binder which has good mechanical strength and high electrochemical stability, and carbon black (Super-P) which has outstanding electrical conductivity as the inorganic compound. First, in order to confirm the suppression of the internal short circuit by the lithium dendrite, the time required for the short circuit is measured while a constant current is continuously applied. As a result, the internal short circuit is delayed in proportion to the carbon black content of the film, and it is significantly delayed than bare Li metal electrode which does not use protection film. The cycle performance of the thick protection film (8 ㎛), is worse than that of the thin film (4 ㎛). However, as the carbon black content of the film increased, the cycle performance is improved. Thus, the surface protection film based on carbon black/PVDF composite can delay the internal short circuit, and has low overvoltage during the cycle. However, more stable cycle performance needs to be built through further improvements.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.363-372
• /
• 2022

Precast concrete is an effective method to increase the construction quality and construction speed by optimizing and making the manufacturing conditions similar. In order to more effectively produce a fireproof material-integrated precast duct slab, the purpose of this study was to determine whether the fire resistance performance of the fireproof layer is maintained when a method of increasing the curing rate using a hardening accelerator is used. As a result of performing a fire resistance performance test on specimens classified according to whether or not the hardening accelerator was included, increase of temperature inside the specimen was high in the specimens using the hardening accelerator, and the section loss of the fireproof layer occurred locally on the surface exposed to fire heating. In conclusion, it is judged that the fireproof layer in the case where the strength at 3th day of age is gained within 1 day curing age using a hardening accelerator does not guarantee sufficient fire resistance performance in the conditions used in this study.