• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1554-1560
• /
• 2015

802.11p WAVE is the next-generation wireless communication that can make Ad-hoc network communication possible for Vehicle-to-Vehicle. GBSR protocol, one of the 802.11p WAVE protocols, mainly focuses on improvements in networks that have a tendency to disconnect. However, it does not consider the transmission time and velocity of a packet thus, there is a disadvantage of there being a delay in the transmission velocity, in urgent situations like car accidents, emergency patients transportation and crimes. In this paper, we proposed A-GBSR protocol for transmission of a packet to mobile node which has a high speed through the improved beacon message and Adaptive Neighbor list Management that are considering of the GBSR protocol transmission velocity.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.421-432
• /
• 2019

In high-speed railway (HSR) system, the structure-borne noise inside viaduct at low frequency has been extensively investigated for its mitigation as a research hotspot owing to its harm to the nearby residents. This study proposed a novel acoustic optimization method for declining the structure-borne noise in viaduct-like structures by separating the acoustic contribution of each structural component in the measured acoustic field. The structural vibration and related acoustic sourcing, propagation, and radiation characteristics for the viaduct box girder under passing vehicle loading are studied by incorporating Finite Element Method (FEM) with Modal Acoustic Vector (MAV) analysis. Based on the Modal Acoustic Transfer Vector (MATV), the structural vibration mode that contributes maximum to the structure-borne noise shall be hereinafter filtered for the acoustic radiation. With vibration mode shapes, the locations of maximum amplitudes for being ribbed to mitigate the structure-borne noise are then obtained, and the structure-borne noise mitigation performance shall be eventually analyzed regarding to the ribbing conduction. The results demonstrate that the structural vibration and structure-borne noise of the viaduct box girder mainly occupy both in the range within 100 Hz, and the dominant frequency bands both are [31.5, 80] Hz. The peak frequency for the structure-borne noise of the viaduct box girder is mainly caused by $16^{th}$ and $62^{th}$ vibration modes; these two mode shapes mainly reflect the local vibration of the wing plate and top plate. By introducing web plate at the maximum amplitude of main mode shapes that contribute most to the acoustic modal contribution factors, the acoustic pressure peaks at the field-testing points are hereinafter obviously declined, this implies that the structure-borne noise mitigation performance is relatively promising for the viaduct.

• Structural Engineering and Mechanics
• /
• v.70 no.2
• /
• pp.169-178
• /
• 2019

The replacement of damaged components is an important task for long-span bridges. Conventional strategy for component replacement is to close the bridge to traffic, so that the influence of the surrounding environment is reduced to a minimum extent. However, complete traffic interruption would bring substantial economic losses and negative social influence nowadays. This paper investigates traffic control technologies without interruption for component replacement of long-span bridges. A numerical procedure of traffic control technologies is proposed incorporating traffic microsimulation and site-specific data, which is then implemented through a case study of cable replacement of a long-span cable-stayed bridge. Results indicate traffic load effects on the bridge are lower than the design values under current low daily traffic volume, and therefore cable replacement could be conducted without traffic control. However, considering a possible medium or high level of daily traffic volume, traffic load effects of girder bending moment and cable force nearest to the replaced cable become larger than the design level. This indicates a potential risk of failure, and traffic control should be implemented. Parametric studies show that speed control does not decrease but increase the load effects, and flow control using lane closure is not effectual. However, weight control and gap control are very effective to mitigate traffic load effects, and it is recommended to employ a weight control with gross vehicle weight no more than 65 t or/and a gap control with minimum vehicle gap no less than 40 m for the cable replacement of the case bridge.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.26-36
• /
• 2022

Recently, studies have been conducted to cluster vehicles and disseminate safety messages in a VANET environment for driver safety and smoothy traffic. This paper proposes cluster management scheme for safety message dissemination through V2V communication and V2I communication in a VANET environment with high vehicle density and mobility. The proposed scheme reduces packet loss by selecting CH considering reception quality, total data owned by vehicles, moving speed, and connected vehicles, and maintaining cluster head candidates, which are the main agents of message dissemination, considering frequent cluster departures and subscriptions. In addition, the proposed scheme reduces duplicate messages by utilizing clusters by collaborating with a Road side unit(RSU). To prove the excellence of the proposed scheme, various performance evaluations are performed in terms of message packet loss and the number of RSU processing requests. As a result of performance evaluation, the cluster management scheme proposed in this paper shows better performance than the existing scheme.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.63-70
• /
• 2019

The number of vehicle-to-barrier collisions has increased due to improved driving environments. In addition, it is reported that the number of accidents led to impact severity larger than current capacity of a median barrier has increased. It is required to develop a high performance median barrier in order to secure expressway safety. This paper aims at proposing impact loading model and locations for a high performance median barrier based on analysis of median-barrier-related accident history. The SB6 test level (Impact severity: 420 kJ, Mass: 25 ton, Impact speed: 80 km/h, Impact angle: $15^{\circ}$) was suggested for target impact severity based on statistical data analysis. The suitable locations also were proposed from investigation of driver behaviors for installation and rehabilitation of high performance median barrier.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.113-120
• /
• 2014

In this paper, we examine Asymmetric Multi-Processing Environment to provide LDW service. Asymmetric Multi-Processing Environment consists of high-speed MCU to support rapid image processing and low-speed MCU for controlling with other ECU at the control domain. Also we designed rapid image process application and LDW application Software Component(SW-C) according to the development process rule of AUTOSAR. To communicate between two MCUs, timer based polling based IPC was designed. Also to communicate with other ECUs(Electronic Control Units), we designed CAN messages to provide alarm information and receiving CAN message to catch the Turn signal. We confirm the possibility of the various ADAS development using an Asymmetric Multi-Processing Environment and AUTOSAR platform. We also expect providing ISO 26262 functional safety.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.102-105
• /
• 1991

In recognition of the transportation problems of the present and to prepare for the ever increasing demands of the future, government decided to develop the magnetically levitated train domestically and started R&D program office in Korea Institute of Machinery and Metals(KIMM). This office since has established three step by step goals : first to develop a 40 passenger exhibition vehicle for Daejon EXPO'93, second to develop the low to mid-speed maglev system for urban public transportation by 1997 and finally the high speed inter-city maglev train by year 2001. The first two maglev systems will use attractive levitation-LIM driven technologies and these technologies are the ones currently being developed by this office and others. The maglev train system is a product of wide range of technologies from electro-technologies to civil engineering technologies. Some of the technologies are currently available but more have to be developed in the near future and these technologies are owned by or to be developed by various institutions within the science & technology community. The level of the technologies available at the present time are still very rudimentary and their basis are very narrow. Recently we have made a few successes in terms of levitation and propulsion but they are only with small scale modules and results are very qualitative at best. A great deal of development work has yet to be done to refine the technologies and to gain confidence. Full scale levitation/propulsion modules will be tested on the curved guideway within 6 months by this office and another institution. This paper reviews the current status of the maglev technologies in Korea and discuss the development strategies. The Korean maglev program is very ambitious and the schedule is even more so. A steady financial support and strong system engineering and integration are essential to the success of this program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.65-73
• /
• 2006

When a satellite separates from the launch vehicle, an initial high angular rate or a tip-off rate is generated. B-dot logic is generally used for controlling the initial tip-off rate. However, it has the disadvantage of taking a relatively long time to control the initial tip-off rate. To solve this problem, this paper suggests a new detumbling control method to be able to adapt to micro/nanosatellite with the pitch bias momentum system. Proposed detumbling method was able to control the angular rate within 20 minutes which is significantly reduced compared to conventional methods. Since the previous wheel start-up method cannot be used if the detumbling controller proposed by this paper is used, a method is also proposed for bringing up the momentum wheel speed to nominal rpm while maintaining stability in this paper. The performance of the method is compared and verified through simulation. The overall result shows much faster control time compared to the conventional methods, and achievement of the nominal wheel speed and 3-axes stabilization while maintaining stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.363-367
• /
• 2016

A test section of a supersonic wind tunnel was designed for the analysis of flow characteristics over a backward-facing step with Mach 1.0 slot injection in a supersonic flow of Mach 2.5. The cavity flow of a high-speed vehicle is very complex at supersonic speed, so it is necessary to do experiments using supersonic wind tunnels to verify numerical analysis methods. The previous 2D symmetrical nozzle was replaced with an asymmetrical nozzle. The inviscid nozzle contour was designed using Method of Characteristics (MOC), and the boundary layer thickness correction was reflected by experimental data from the wind tunnel. The results were compared with a CFD analysis. The PID control system was changed to be based on the change of tank pressure. This improved the control efficiency, and the run times of supersonic flow increased by about 1 second. The flow characteristics over a backward facing step with slot injection were visualized by a Schlieren device. This equipment will be used for an experimental study of the film cooling effectiveness over a cavity with various velocities, mass flows, and temperatures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.121-127
• /
• 2020

The small tracking radar targets the target in a real-time, fast-moving, fast-moving target against aircraft with a large RCS that is maneuvering at low speed and a small RCS aircraft maneuvering at high speed (fighters, drones, helicopters, etc.) It is a pulsed radar that detects and tracks. Performing a performance test on a tracking radar in a real environment is expensive, and it is difficult to quantitatively measure performance in a real environment. Describes the composition of the laboratory environment's comprehensive performance test facility and the main requirements and implementation of each configuration.Anechoic chambers to simulate the room environment, simulation target generator to simulate the signal of the room target, target It is composed of a horn antenna driving device to simulate the movement of a vehicle and a Flight Motion Simulatior (FMS) to simulate the flight environment of a tracking radar, and each design and implementation has been described.