• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.510-516
• /
• 2005

In this paper, we discuss parameters of line code and simulate a same optical ethernet having minimum bandwidth(MB810) and non-minimum bandwidth line code(8B/10B) to present the possibility of improving of transmission performance using minimum bandwidth line code on the high speed optical ethernet. We design the high speed optical ethernet using Serial type LAN PHY 10GBASE-E(WDM type LAN PHY 10GBASE-LX4) for the single(multi) channel link. To compare the transmission performance of MB810, 8B/10B line code we measure the bit error rate(BER) according to the received optical power of single and multi channel link.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.46-55
• /
• 2014

PCB design technology for high-speed transmission line has been developed continuously. Adapting to the high capacity of the communication system, switch fabric interface used for backplane is being standardized to accommodate more than 10Gbps serial interface. In this paper, various computer simulations are performed to compare the performance of each transmission line per length according to PCB material, and also to analyze the effect from via stub length and crosstalk, for the purpose of applying 11.5Gbps serial interface as a switch fabric interface in tera-bit switching system. As a result of the simulation, important design issues, such as PCB material of each board supporting 8dB improvement in transmission loss using low loss PCB, maximum available stub length on transmission line via, whether or not to apply the backdrill process to the via, and the clearance of the differential pair between transmission lines, are determined. The most efficient system architecture which could be applied 11.5Gbps serial interface in all switch fabric interfaces is defined from the simulation results.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.62-69
• /
• 2003

In recent years, data transmission using power lines has been much highlighted. Power line is known to be cost-effective communication medium because the entire cable infrastructure has been already established and it is entirely connected with any home. Recently, the target of researches is to communicate data reliably over power lines at the speed of at least 1Mbits/s over the frequency range from 1MHz to 10MHz. OFDM communication system has been used for the high speed data transmission. Next, the conventional and adaptive OFDM systems for high speed data transmission over power line channel are investigated. The performance of AOFDM(adaptive OFDM) over the frequency selective channel with impulsive and narrow-band noise are studied to be a nice solution for high speed data transmission over power lines. The simulation results show that data the rates of the AOFDM are improved about 47% more than the ones of the conventional OFDM over the frequency response of case 4. In the results, the data rate has been much improved by the proposed adaptive algorithm in the frequency selective channel.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.8
• /
• pp.16-25
• /
• 1994

The prediction of crosstalk in one of important problems in estimating the EMC of a system for high speed digital signal transmission. Crosstalk curves are shown in terms of characteristic impedance of lines spacing between lines and rise time of pulse by using general multiple coupled transmission line equation and harmonic-balance method. The coupled symmetrical two-line on dielectric material epoxy-glass FR 4(${\varepsilon}_r$), is fabricated to measure crosstalk occuring at the near end and far end of the passive line. The inter-line is inserted to reduce crosstalk between two microstrip lines. The simulation results and the measurement results are shown and found to be very close.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.213-219
• /
• 2012

In this paper, we suggested the method of signal integrity for noises and distortion signal generated between high speed information transmission modules by external effects. Suggested method for signal integrity of impedance matching to remove transmission line distortion, We divided the impedance matching between the transmitter and the receiver module with the single line and differential line methods after confirmed the improvement of signal distortions through ADS simulation. the experimental results indicated that it is possible to keep signal integrity without signal distortions by matching the optimal termination impedance which are considering the signal delay of transmission line for using the high-performance modules.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.241-248
• /
• 1998

The purpose of this study is to evaluate the harmonics generated from Korea High Speed Rail's trainset and to analyze the effect on the KEPCO power system. This study focuses on the test track of the high speed rail and analyzes 154㎸ transmission line, scott transformer, autotransformer and 27,5㎸ line. The trainset is modeled as a harmonic source attached to the catenary line of the test track. Then, harmonic distortion is calculated. This distortion is compared with the KEPCO's regulations in relation to harmonic.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.403-406
• /
• 2009

Recently, electricity is essential for human lives. Modem people take cultural benefits due to the development of the electric power system and the spread of the high tech-electric appliances, the cell phones, and etc. However, the electromagnetic field problems become prominent figures owing to the fault of the communication devices around the power line and the biological effect, and etc. In this paper, we introduce the simple electromagnetic field calculation based on the transmission line matrix method, prior to the analysis about the influence of electromagnetic field. Simulation object is the inner part of the trailer car in the high speed train. Unlike the existing paper we submitted, we analyze not only the magnetic field but the electric field in the inner part of the trailer car which makes up the high speed train.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1077-1083
• /
• 2000

With rising demand of Internet Service, the existing communication for users (aced the restricted capability and speed, and also failed to satisfy consumer's desire for providing service-quality to them. It can be accomplished the broad-band on subscribe-line to offer various multimedia service to subscriber. But it takes a lot of times and costs. Consequently, it stands out the most economic subscribe-line for acheving a broadband scheme that new transmission technology can be realized the high-speed data communication as the present telephone-line and telephone by the general public of FTTH(Fiber To The Home). As using the pseudo line, this paper have the result that the mesured speed was improved by connecting a variable resistor on the line.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.613-615
• /
• 1995

KEPCO is now going on upgrading the highest system voltage from 345kV to 765kV since 1992. The main reason of this 765kV project is the bulk power transmission from the power generation sites at the East and West coasts to the Kyeong-in area. The first 765kV transmission lines will be constructed by 1998 and operated as 345kV level until 2001. This system needs a detailed evaluation of the 2nd arc in case of 765kV transmission line outages and the countermeasures for the fast arc reduction for the successful high speed reclosing. So, this paper deals with the simulation results of the 2nd arc characteristics using EMTP and comparison of Sh.R and HSGS for the reduction methods.