• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4068-4076
• /
• 2013

The wheel-rail interaction forces are influenced by the velocity of vehicle, wheel load, alignment (curve radius, cant etc). For the safety of track structure, it is required to evaluate the influences for track and influential factors. Recently, the HEMU 430-X, which was developed by Next Generation High-Speed Rail Development R&D Project, achieved 421.4km/h in a test run of Daegu.Busan section of the Gyeongbu high speed rail on March in 2013. In the case of additional speed-up test on Test-Bed Section(Gongju.Jeongeup: KP 100~128km Osong starting point), the analysis of track forces is required for outer rail by the increase of dynamic force and centrifugal force of vehicle. In this paper, the vehicle speed variation on HSL line is evaluated by TPS analysis considering the tractive effort of HEMU 430-X, tested running resistance and alignment of Honam HSR. And the track forces are evaluated by centrifugal force and impact factor on curved track.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.112-117
• /
• 2003

The purpose of this work is to general approach to numerically simulating wear in rolling and sliding contact area between wheel and rail interface based on the analysis of dynamics with general MBS package. A simulation scheme is developed that calculates the wear at a detailed level. The estimation of material removal follows Archard's wear equation which states that the reduction of volume is linearly proportional to the sliding distance, the normal applied load and the wear coefficient and inverse proportional to hardness. The main research application is the wheel-rail contact of Korea High Speed Railway.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.307-314
• /
• 1998

In this paper, a numerical method for analyzing the interactions between train and track is presented. The effect of track irregularity on high speed running trains and track is examined by parametric studies. Two types of vertical track irregularity are considered. The first one is ideally assumed to a sine wave to investigate train and track behaviors with the change of its shape feasibly, The second one is artificially generated from PSD of track irregularity which was established from the measured data on real railways. In the track dynamic model, rail is considered to have a distributed mass and to be supported discretely at sleepers above ballast divided into three layers. Then, the contact between wheel and rail is modeled by a nonlinear Hertzian spring.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.369-376
• /
• 2003

The purpose of this work is to general approach to numerically simulating wear in rolling and sliding contact area between wheel and rail interface based on the analysis of dynamics characteristics with general MBS package. A simulation scheme is developed that calculates the wear at a detailed and various level. The estimation of material removal follows Archard's wear equation which states that the reduction of volume is linearly proportional to the sliding distance, the normal applied load and the wear coefficient and inverse proportional to hardness. The main research application is the wheel-rail contact of Korea High Speed Railway.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.347-349
• /
• 1998

This paper describes a fuzzy identification model for slip - adhesion curve of High - speed trains. The model has fuzzy inputs corresponding to rail condition and crisp inputs for train. Nonlinear function is obtained by using fuzzy outputs. Finally slip - adhesion curve is given by the function. First, Results are presented of slip - adhesion curves under the influence of changing rail condition. Second, Dynamic moving simulation by proposed fuzzy slip - adhesion model is presented. Simulation results show fine characteristics.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.380-386
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from that of previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest all of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In the paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper dynamic models including air-suspension system, wheel-rail, bogie and car-body is developed according to the vehicle simulation scenario. The basic platform for the development of dynamic solver is prepared using nodal, modal coordinate system and wheel-rail contact module. Operating scenario is prepared using commercial dynamic analysis program and used for development of dynamic model, which contains many parts such as carbodies, bogies and suspension systems. Furthermore, international safety standard is applied for final verification of the system. Finally, the reliability of the dynamic model will be verified with test results in the further researches. This research will propose a better solution when test results shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.344-350
• /
• 2002

This paper proposes the Systematic Design Methodology of the Korean High Speed Train. High Speed Train do not operate in isolation and are part of a rail system which is influenced through input and output effects from the environment and from the neighbouring system. To fulfil its overall desired function, such input and output relationships between the systems must be considered in the system boundary conditions. Therefore, the overall interrelationship of all these effects has to be carefully considered during the design process. Here proposed methodology may provide a guide line and criteria for the systematic problem solving method of that highly complex High Speed Train System.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.14-19
• /
• 2003

This paper is aiming to analyse the prefeasibility study of introduction of high speed rail freight system to transport some parcels for train operation efficiencies. As it does, this system can be meant a kind of multimodal system considering the passenger and freight in the same trainset, simultaneously. First, we implemented the parcel service market survey for customers preference, predicted demand forecast for high speed rail freight, and analysed B/C, NPV, etc.. As the result, this new system is feasible of applying the passenger-freight operation system economically, find the needs such as some revision of motor car for parcel freight transportation at the initial stage.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.27-34
• /
• 2003

This Study is about adoption of slab track on the new high speed railway line between Daegu and Busan. While ballast track currently used is easy to construct with low investment, the error margin of rail track occurs in the track due to the repetition load of the train. Therefore, repairs should be carried out all the time to put the railway track at the repair level or less. In addition, noise caused by such repairs has become a new social problem at night. Construction costs for slab track are about 1.3-1.5 times higher than those for ballast track. However, slab track will save labor costs by solving various problems of ballast track. In this regard, it is feasible to adopt slab track on the new high speed railway line between Daegu and Busan.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2002

We propose a novel sensing circuit for 2T-2MTJ MRAM that can be used for high speed synchronous operation. Proposed bit-line sense amplifier detects small voltage difference in bit-lines and develops it into rail-to-rail swing while maintaining small voltage difference on TMR cells. It is small enough to fit into each column that the whole data array on selected word line are activated as in DRAMs for high-speed read-out by changing column addresses only. We designed a 256Kb read-only MRAM in a $0.35\mu\textrm{m}$ logic technology to verify the new sensing scheme. Simulation result shows a 25ns RAS access time and a cycle time shorter than 10 ns.