• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.160-163
• /
• 1998

In this study, the compostable household wastes from a house were composted in a home composter without adding any bulking agent and microorganisms. Every day wastes of 1kg were added to the composter during the experimental period. The following results were obtained : 1. Each component of the compostable household wastes generated every day showed very difference. 2. While composting proceeded at room temperature by suppling 1,1322 l air per hour, the composting material maintained the water content of 74.36 ${\sim}$ 85.14%, whereas while composting proceeded at $45^{\circ}C$ by suppling 427 l air per hour, the compost had optimal water content. The electric power of 132kwh a month was required by operating the composting unit at $45^{\circ}C$. 3. During 20 day, decomposition of 28% at room temperature and 44% at $45^{\circ}C$ were obtained respectively. 4. The accumulation of inorganic compound contents were not shown during the composting period, However, the content of salt and Cd was very high. Therefore, using the compost for agriculture has to be careful. 5. The biofilter removed the odorous substants efficiently at the room temperature due to increasing surface loading.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Korean Journal of Environmental Biology
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2002

With physico-chemical environmental factors such as temperature, DO, pH, conductivity and nutrients, size fractionated of phytoplankton standing crops and chlorophyll a concentrations $(>8\mu{m},\;3-8\mu{m},\;<3\mu{m})$ and their relationships were investigated at each station of Kyungan Stream and Togyo Reservoir from April to November in 1997. The two sampling sites showed different nutrient status: Kyungan Stream was eutrophic, while Togyo Reservoir was mesotrophic. Large sizes of phytoplankton and chl. a were higher in Kyungan Stream, opposite to those of Togyo Reservoir; Standing crops of phytoplankton $(>8\mu{m)$ and chl. a $(3-8\mu{m)}$ were high in Kyung-an Stream, while phytoplankton $(3-8\mu{m)}$and chi. a $(<3\mu{m)$ were abundant in Togyo Reservoir. These results imply that phytoplankton community in the highly eutrophicated water mainly comprised the large filamentous and/or colonial algae, such as Microcystis spp. and Aphanizomenon flos-aquae, which easily enriched by nutrients loading.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.6
• /
• pp.1-12
• /
• 2005

Treatment level and pond reactions of a pond system were examined from May to October 2002. The system was constructed in July 2000 for purifying water of Sinyang stream that flows into Koheung Estuarine Lake located in the southern part of the Korean Peninsula. The system was composed of a primary and a secondary pond in series and established on the rice field near the lake. Water pumped from the stream was funneled into the primary pond, whose effluent was discharged into the secondary pond by gravity flow. Effluent from the secondary pond was funneled into wetlands. About 130 $m^3$/day of water was pumped into the primary pond and detention time of the primary and secondary pond was about 2 days. DO from the surface to the 1.0 m depth of the primary and secondary pond was in the rage of 5.2 to 11.0 mg/L and 4.3 to 0.7 mg/L, respectively. DO at the bottom layer of the primary pond was 0 mg/L and that of the secondary pond ranged 3.0~4.7 mg/L. The primary pond functioned as a facultative pond and the secondary as an aerobic one. The temperature difference between the surface and bottom layers of the ponds in August was about $2.5^{\circ}C$ and that in May and October was about $1.0^{\circ}C$. Thermocline was observed in the primary pond during the high ambient temperature of August. The sludge depth of the primary pond in May, August, and October was 2.4, 1.9, and 2.2 cm, respectively. That of the secondary pond was 1.2, 1.0, and 1.1 cm, respectively. SS, $BOD_5$, T-N, and T-P concentrations in influent averaged 16.64, 6.71, 6.21, and 0.23 mg/L and those in effluent from the primary pond averaged 11.48, 4.97, 4.81, and 0.17 mg/L, respectively. The removal rates of the primary pond for SS, $BOD_5$, T-N and T-P were 31%, 26%, 22%, and 24%, respectively. Average concentrations of SS, $BOD_5$, T-N, and T-P in effluent from the secondary pond were 9.81, 4.07, 4.03, and 0.14 mg/L, respectively and the abatement rates of the secondary pond for SS, $BOD_5$, T-N and T-P were 20%, 12%, 13%, and 15%, respectively. SS, $BOD_5$, T-N and T-P concentrations in effluent from the primary pond were significantly low(p=0.001) when compared with those from the secondary one.

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.639-644
• /
• 2013

In this study, ethosomes loaded with Eucommia ulmoides extracts that have anti-inflammatory and anti-aging activities on the skin were prepared as cosmetic materials. The particle size, physical property, and entrapment efficiency of ethosomes to identify their stabilities during 4 weeks were measured. Ethosomes containing 0.01~0.05% E. ulmoides extracts did not show either precipitation or separation. The mean particle size of these ethosomes was 136.4 nm, and monodisperse. The particle size of ethosome containing 0.05% E. ulmoides extracts was 151.15 nm and the entrapment efficiency was 81.79%. Therefore, in vitro skin permeation experiment was performed with ethosome containing 0.05% E. ulmoides extracts that showed the high loading efficiency and stability during 4 weeks. The order of skin permeation of E. ulmoides extracts was ethosome (77.16%) > liposome (62.80%) > ethanolic solutoin (41.59%). These results suggest that ethosomes containing 0.05% E. ulmoides extracts are effective for the skin permeation and may be used as a cosmetic formulation containing plant extracts.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.97-104
• /
• 2018

In this study, a structure satisfying the fatigue constraint is designed by applying the topology optimization based on the phase field design method. In order to predict life based on the stress value, high cycle fatigue failure theory in which stress acts within the range of elastic limit is discussed and three fatigue theories of modified-Goodman, Smith-Watson-Topper and Gerber theory are applied. To calculate the global maximum stress, a modified P-norm stress correction method is used. As a result, it is possible to obtain topology optimization results that minimize the volume while satisfying the fatigue constraints. By applying the phase field design method, a simple shape with a minimized gray scale was obtained, and the maximum stress value acting on the optimization result became very close to the allowable stress value due to the modified P-norm stress method. While previous studies does not consider the stress correction factor, this study proposes the determination method regarding the stress correction factor considering loading effects related to axial stress components.

• Corrosion Science and Technology
• /
• v.9 no.4
• /
• pp.147-152
• /
• 2010

Conventional paints for conversion coating applications in steel production derived mainly from water-based polymer dispersions containing several additives actually show good general performance, but suffer from poor scratch and abrasion resistance during use. The reason for this is because the relatively soft organic binder matrix dominates the mechanical surface properties. In order to maintain the high quality and decorative function of coated steel sheets, the mechanical performance of the surface needs to be improved significantly. In fact the wear resistance should be enhanced without affecting the optical appearance of the coatings by using appropriate nanoparticulate additives. In this direction, nanocomposite coating compositions (Nanomer$^{(R)}$) have been derived from water-based polymer dispersions with an increasing amount of surface-modified nanoparticles in aqueous dispersion in order to monitor the effect of degree of filling with rigid nanoparticles. The surface of nanoparticles has been modified for optimum compatibility with the polymer matrix in order to achieve homogeneous nanoparticle dispersion over the matrix. This approach has been extended in such a way that a more expanded hybrid network has been condensed on the nanoparticle surface by a hydrolytic condensation reaction in addition to the quasi-monolayer type small molecular surface modification. It was expected that this additional modification will lead to more intensive cross-linking in coating systems resulting in further improved scratch-resistance compared to simple addition of nanoparticles with quasi-monolayer surface modification. The resulting compositions have been coated on zinc-galvanized steel and cured. The wear resistance and the corrosion protection of the modified coating systems have been tested in dependence on the compositional change, the type of surface modification as well as the mixing conditions with different shear forces. It has been found out that for loading levels up to 50 wt.-% nanoparticles, the mechanical wear resistance remains almost unaffected compared to the unmodified resin. In addition, the corrosion resistance remained unaffected even after $180^{\circ}$ bending test showing that the flexibility of coating was not decreased by nanoparticle addition. Electron microscopy showed that the inorganic nanoparticles do not penetrate into the organic resin droplets during the mixing process but rather formed agglomerates outside the polymer droplet phase resulting in quite moderate cross linking while curing, because of viscosity. The proposed mechanisms of composite formation and cross linking could explain the poor effect regarding improvement of mechanical wear resistance and help to set up new synthesis strategies for improved nanocomposite morphologies, which should provide increased wear resistance.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.393-398
• /
• 2000

To extend utilization of alginate from the sea tangle, Laminaria japonicus, depolymerized alginates (HAG-10, average molecular weight 10,000; HAC-50, average molecular weight 50,000; HAG-100, average molecular weight 100,000) were obtained by hydrolysis of alginate by heating at $12^{\circ}C$. The effects of each depolymerized alginate on excretion of cholesterol, glucose and namium in rats were investigated. The total excretion rate (${\%}$) of cholesterol and cadmium was the highest in rats administered with HAG-50, The rate was $45.81{\%} and 59.02{\%} with HAG-50$. It was high in the order of $45.78{\%} and 56.05{\%}$ in HAG-100, $41.28{\%}$ and $55.96{\%}$ in alginate, and $32.11{\%} and 44.92{\%} in HAC-10$, respectively. In the case of HAG-50, it significantly (p<0.01) prevented the serum glucose level of rats from rising within 30 min and 60 min after glucose loading or administration among all the samples, but it had no particular effects on the serum insulin level. In conclusion, it was suggested that HAG-50, in which the alginate had a decreased molecular weight, while still retaining its desirable functions as a dietary fiber, was effective in excretion of harmful substances, such as cadmium and cholesterol, and in lowering glucose activities in serum of rats.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.505-518
• /
• 1997

The objective of this investigation was to compare the effects of water storage on the aspect of hardness and diametral tensile strengths of four hybrid glass ionomer cements(two compomers and two resin-reinforced glass ionomers) with a resin composite material. One composite resin(Degufill Ultra), two compomers(Dyract, Compoglass Cavifil), and two resin-reinforced glass ionomers(Fuji Duet, Vitremer) were used in this study. Cylindrical specimens were prepared and stored at $36{\pm}1^{\circ}C$ in distilled water for 10 minutes after set, and then tested on an Instron testing machine(No.4467) at 1.0 mm/min displacement rate. Vicker's hardness and diametral tensile strengths as time elapsed were measured after aging in water for 10 minutes, 1 hour, 3 hours, 1 day, 3 days, 5 days and 7 days at $36{\pm}1^{\circ}C$. During the test of diametral tensile strength, stress-strain curves were obtained, from which the compressive modulus were calculated and compared. The structure of four set glass ionomer cement mass was observed on SEM(Hitachi, S-2300) after being etched with 9.6% hydrofluoric acid for 1 minute. The results were as follows; 1. The hardness of the experimental group(compomer and the resin reinforced glass ionomer cement) did not exceed the value of control group(Degufill Ultra). 2. Vicker's hardness of the Fuji Duet tended to increase succeedingly, Dyract was decreased after 3 hours in water, and Vitremer was the lowest. 3. The control group(Degufill Ultra) presented progressively on increased diametral tensile strength with time, Fuji Duet were decreased after 3 days, Compoglass Cavifil and Vitremer were decreased after 5 days in water storage. 4. Compressive modulus of the control group(Degufill Ultra) and Dyract were increased sharply timely, Fuji Duet and Vitremer were increased smoothly by lapse of time in water. Fuji Duet were stronger than Vitremer. On the other hand, Vitremer exhibited the lowest toughness. 5. The microstructure of compomer was similar with that of the composite resin(Degufill Ultra), and the fillers in resin-reinforced glass ionomer cements were noticed. It can be concluded that mechanical properties of hybrid glass ionomer cements is weaker than composite resin, and that the compomers or the resin-reinforced glass ionomers can not substitute the composite resins. A plenty of considerations should be done on the application of them to the area under the loading and high wear has a little adverse effect on the mechanical properties on the water storage for 7 days. The further research should be needed to confirm the advantage of the compomer.