• 터널과지하공간
• /
• 제24권6호
• /
• pp.405-417
• /
• 2014

고준위폐기물처분장에서 갭채움재는 완충재와 뒷채움재의 성능을 좌우하는 중요한 공학적방벽의 구성요소이다. 본 논문에서는 갭채움재에 대한 해외 기술현황을 조사하고, 이를 통하여 갭채움재의 개념, 제조기술, 성형특성, 설치기술에 대한 연구결과들을 정리하였다. 갭채움재 개념은 처분방식과 처분개념에 따라서 나라마다 약간씩 차이가 있었다. 갭채움재 물질로는 대부분 벤토나이트를 사용하였고, 충전제로 점토를 사용하였다. 갭채움재는 펠렛, 과립상, 또는 펠렛-과립상 혼합물의 형태로 사용되었다. 갭채움재 펠렛 제조에는 정압축, 롤러압축, 압출-컷팅 방법 등이 사용되었으며, 이 중, 실험과 실제 현장에서의 펠렛 소요량을 감안하여 많은 나라들이 롤러압축방법과 압출-컷팅방법에 대한 기술 확보에 집중하였다. 펠렛 성형특성 실험결과, 펠렛의 건조밀도와 건전성은 수분함량, 구성물질, 제조방법, 펠렛 크기에 민감하였고, 제작 시 압축하중에는 상대적으로 덜 민감하였다. 갭채움재의 설치방법으로는 수직처분공 완충재 갭에서는 부어넣기(pouring) 방법, 붓고 다지기(pouring and tamping) 방법, 진동을 주며 부어넣기(pouring with vibration) 방법 등이 시도되었으며, 수평처분공 완충재와 처분터널의 뒷채움재 갭에서는 숏크리트 기술을 이용한 불어넣기(blowing by use of shotcrete technology) 방법과 오거를 이용한 정치 및 다지기(auger placement and compaction) 방법 등이 시도되었다. 그러나 이 방법들은 아직 기술적으로 초기단계에 있어 앞으로도 계속적인 연구가 이루어질 것으로 예상되었다.

• 한국농공학회논문집
• /
• 제60권6호
• /
• pp.111-119
• /
• 2018

The air-void is known to be one of the influencing factors for estimating long-term performance of asphalt concrete. Most of all, confirming air void or density of pavement layer is important for quality control of field compaction level of asphalt concrete pavement. In this study, a non-nuclear type non-destructive density gage (NDDG) was used to estimate compacted air-voids of asphalt pavement as a non-destructive test method. Asphalt concrete slab specimens were prepared using 6 types of asphalt mixes in laboratory (lab) for lab NDDG test. Four different base structure materials were used to find out if there were any differences due to the type of base structure materials. The actual air-voids and NDDG air-voids were measured from 6 asphalt concrete slabs. Four sections of field asphalt pavements were tested using the NDDG, and actual air voids were also measured from field cores taken from the site where the NDDG air-void was measured. From lab and field experimental tests, it was found that the air-voids obtained by NDDG were not the same as the actual air-voids measured from the asphalt concrete specimen. However, it was possible to estimate air voids based on the relationship obtained from regression analysis between actual and NDDG air voids. The predicted air-voids based on the NDDG air-voids obtained from 50mm depth were found to be reliable levels with $R^2{\fallingdotseq}0.9$. Therefore, it was concluded that the air-voids obtained from NDDG could be used to estimate actual air-voids in the field asphalt pavement with a relatively high coefficient of determination.

• 한국농공학회지
• /
• 제31권3호
• /
• pp.57-69
• /
• 1989

The study was carried out for the strength parameter of coarse grained Soil and slope stability analysis of earth dam. The test samples were taken fifteen kinds of soil from cohesive soil to coarse gravel. The degree of compaction of test samples for shear test and permeability test was chosen 95 percentage of maximum dry density. The results of this study are as follows ; 1.The maximum dry density(Yd) of coarse grained soil increase in proportion to coarse particles(P) with the relation of Y d= 1.609+0.0043P. 2.The coefficients of permeability(k) decrease by the increase of fine particles(n) with the relation of k=0.0426e-0 185n. 3.The cohesions of soil decrease by the increase of coarse particles, but internal friction angles are more increased in same condition. 4.The internal friction angles(${\Phi}$) decrease in inverse proportion to void ratio(e) with the relation of ${\Phi}$ = 73.068 - 69.268e. 5.The strength parameters( Ct ${\Phi}$t) by triaxial compression test are clearly smaller than that (Cd, ${\Phi}$d) by direct shear test in fine grained soil, but the differences between both parameters are a little in coarse grained soil.The relations of both parameters are as follows; Ct = O.544Cd + 0.04 ${\Phi}$t= 1.282${\Phi}$d-2306 6.In cohesive soil, the strength parameters( Cl ${\Phi}$l) by large size shear test apparatus are similar to the strength parameters(Cs , ${\Phi}$s) by small size shear test appratus, but Cs and ${\Phi}$s values are larger than Cl and ${\Phi}$l values from 10 percentage to 20 percentage in coarse grained soil. 7.The fine grained soil is inappropriate to high dam more than 20 meters and it must be taken coarse grained soil with high internal friction angle for high dam.

• 한국재난정보학회 논문집
• /
• 제13권1호
• /
• pp.43-50
• /
• 2017

본 연구에서는 연약지반이나 부분침하의 복원에 사용되는 팽창약액의 지반내 강도증진 및 응력전달효과를 알아보기 위하여 팽창성능을 구분한 팽창약액을 제작하여 모래지반내의 밀도 및 토압을 측정하여 분석하였다. 상대적 고팽창군과 저팽창군으로 구분하여 별도의 불투수 진공시트에 주입하여 팽창보강제를 제작하고 이를 균질하게 조성된 모형지반하부에서 고결실험을 시행하였다. 이 결과 팽창보강제 상부 약 15cm까지 보강효과가 나타났고, 토압의 분석결과 $1.150{\sim}11.298t/m^2$의 집중하중과 유사한 다짐경향이 나타났다.

• 한국분말재료학회지
• /
• 제19권3호
• /
• pp.189-195
• /
• 2012

A novel PM (powder metallurgy) steel for automotive power-train gear components was developed to reduce manufacturing cost, while meeting application requirements. The high-density PM steel was manufactured by mixing using special Cr-Mo atomized iron powders, high-pressure compaction, and sintering. Tensile strength, charpy impact, bending fatigue, and contact fatigue tests for the PM steel were carried out and compared to conventional forged steel. Pinion gears for auto-transmission were also manufactured by helical pressing, sintering, and surface densification process. In order to evaluate the durability of the PM parts, auto-transmission durability tests were performed using dynamometer tests. Results showed that the PM steel fulfilled the requirements for pinion gears indicating suitable tensile, bending fatigue, contact fatigue strengths and improved gear tooth profile. The PM gears also showed good performance during the transmission durability tests. As a result, the PM gears showed significant potential to replace the conventional forged steel gears manufactured by tooth machining (hobbing, shaving, and grinding) processes.

• Composites Research
• /
• 제32권3호
• /
• pp.141-147
• /
• 2019

In this study, micro-sized and nano-sized pure aluminum (Al) powders were compressed by unidirectional pressure at room temperature. Although neither type of Al bulk was heated, they had a high relative density and improved mechanical properties. The microstructural analysis showed a difference in the process of densification according to particle size, and the mechanical properties were measured by the Vickers hardness test and the nano indentation test. The Vickers hardness of micro Al and nano Al fabricated in this study was five to eight times that of ordinary Al. The grain refinement effect was considered to be one of the strengthening factors, and the Hall-Petch equation was introduced to analyze the improved hardness caused by grain size reduction. In addition, the effect of particle size and dispersion of aluminum oxide in the bulk were additionally considered. Based on these results, the present study facilitates the examination of the effect of particle size on the mechanical properties of compacted bulk fabricated by the powder metallurgy method and suggests the possible way to improve the mechanical properties of nano-crystalline powders.

• 아시안잔디학회지
• /
• 제21권2호
• /
• pp.155-161
• /
• 2007

본 연구는 봄철 크리핑 벤트그래스의 품종별 생육특성을 파악하고자 수행하였다. 먼저 그린업 조사결과, CY-2와 T-1의 초기 그린업이 가장 빨랐으며 이는 다른 품종들보다 2주정도 빨리 진행된 것으로 나타나 봄철 그린업 속도에 따른 품종별 별도의 관리 프로그램이 필요할 것으로 생각 되었다. 나머지 품종들의 그린업은 Penn A-4, Crenshaw, L-93 > 2 Penncross > Putter > Dominant > SR1020 순으로 조사되었다. 클로로필 함량은 T-1과 CY-2가 가장 높았고, Penncross는 현저히 낮은 수치를 보였다. 잔디 밀도가 가장 높았던 품종은 Crenshaw, Penn A-4이고, 다음으로 CY-2, L-93, T-1, Putter, Dominant, SR1020, Penncross 순으로 높게 나타났다. 봄철 뿌리생육이 가장 우수한 품종은 CY-2와 L-93이었고, 가장 불량한 품종은 Penncross였다. 시각적 품질은 CY-2가 가장 좋았으며, T-1과 Crenshaw도 우수한 품종으로 분류되었다. SR1020, Dominant 및 Penncross의 시각적 품질은 낮았으나 잔디생육이 활발한 6월에 접어들면서 품종별 차이는 없어졌다. 본 실험의 결과를 종합해 보면 봄철 생육이 가장 우수한 품종은 CY-2, T-1, Crenshaw이었으며, 가장 불량하였던 품종은 SR1020, Penncross였다. 조사된 다양한 결과들은 많은 골프장 그린의 품종 선택과 초기 관리에 유용한 정보가 될 것으로 생각된다. 앞으로 잔디병과 답압 스트레스를 포함한 다양한 항목에 대한 조사가 수행되어야 할 것이다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.343-348
• /
• 2014

A powder-in-sheath rolling (PSR) process utilizing a copper alloy tube was applied to a fabrication of a multi-walled carbon nanotube (CNT) reinforced aluminum matrix composite. A copper tube with an outer diameter of 30 mm and a wall thickness of 2 mm was used as a sheath material. A mixture of pure aluminum powders and CNTs with the volume contents of 1, 3, 5 vol% was filled in the tube by tap filling and then processed to 93.3% height reduction by a rolling mill. The relative density of the CNT/Al composite fabricated by the PSR decreased slightly with increasing of CNTs content, but showed high value more than 98%. The average hardness of the 5%CNT/Al composite increased more than 3 times, compared to that of unreinforced pure Al powder compaction. The hardness of the CNT/Al composites was some higher than that of the composites fabricated by PSR using SUS304 tube. Therefore, it is concluded that the type of tube affects largely on the mechanical properties of the CNT/Al composites in the PSR process.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.281-290
• /
• 2003

굴패각을 대규모로 처리할 수 있는 방법인 건설재료로서 재활용하기 위해 패각원형을 1차파쇄한 상태에서의 굴패각의 파쇄특성과 지반공학적 특성을 고찰하였다. 파쇄된 굴패각의 조립률과 상대밀도에 따른 투수특성과 구속압축특성 그리고 전단특성을 정량적으로 검토하였다. 파쇄 굴패각은 일반 모래에 비해 경량이며 투수특성과 전단특성이 모래와. 유사하며, 파쇄 가능성은 크지만 실제적인 파쇄는 크지 않은 것으로 나타났다. 본 연구에서의 실험결과, 파쇄 굴패각의 파쇄정도에 따른 지반공학적 특성의 정량적인 파악이 가능하며, 모래다짐말뚝공법의 모래 대체재로서 매우 유용하다고 판단된다.

• Geomechanics and Engineering
• /
• 제29권5호
• /
• pp.549-565
• /
• 2022

Severe acid rains can be a major source for geotechnical and environmental problems in any soil depending on the acid type and concentration. Hence, this study investigates the individual severe effects of sulfuric, hydrochloric and nitric acids on the geotechnical properties of real field soil through a series of experimental laboratory tests. The laboratory program consists of experimental tests such as consistency, compaction, unconfined compression, pH determination, electrical conductivity, total dissolved salts, total suspended solids, gypsum and carbonates contents. The experimental tests have been performed on the untreated soil and individual acid treated soil for acid concentrations range of 0% to 20% by weight. In addition, a unique hyperbolic mathematical model has been used to predict significant geotechnical characteristics for acid treated soil. The plastic and liquid limits and optimum moisture content have been increased under the effect of all the used acids whereas the maximum dry density and unconfined stress-strain behavior have been decreased with increasing the acid concentrations. Moreover, the used hyperbolic mathematical model has predicted all the geotechnical characteristics very well with a very high coefficient of determination (R²) value and lowest root mean square error (RMSE) estimate.